Optoma Hd82 Projector User Manual

							
English


User Controls

The Projector has multilingual On-screen Display menus 
that allow you to make image adjustments and change a 
variety of settings. The projector will automatically detect 
the source. 
How to operate 
1.   To open the OSD menu, press “Menu” on the Remote Control or 
Control Panel.
2    When OSD is displayed, use      keys to select any item in the 
main menu.  While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3.   Use      keys to select the desired item and adjust the settings 
by     key.
4.   Select the next item to be adjusted in the sub menu and adjust as 
described above.
5.   Press “Enter” or “Menu” to confirm, and the screen will return to the 
main menu.
6.   To exit, press “Menu” again.  The OSD menu will close and the 
projector will automatically save the new settings.
On-screen Display Menus
Main MenuSetting
Sub Menu      
						

							


User Controls

Menu Tree
%ULJKW0RGH
2Q2II
1R
						

							
English


User Controls

Image
 Mode
There are many factory presets optimized for various types of im-
ages.
 Cinema: For home theater.
 Bright: Maximum brightness input.
 Photo: Optimized for displaying photographic images.
 Reference: This mode is intended to reproduce, as close as 
possible, the image the way the movie director intended. Color, 
color temperature, brightness, contrast and gamma settings are 
all configured to standard reference levels.
 User: User’s settings.
  Contrast
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes 
the amount of black and white in the image.
 Press the  to decrease the contrast.
 Press the  to increase the contrast.
  Brightness
Adjust the brightness of the image.
 Press the  to darken image.
 Press the  to lighten the image.      
						

							


User Controls

 Color
Adjust a video image from black and white to fully saturated color .
 Press the  to decrease the color saturation in the image.
 Press the  to increase the color saturation in the image. 
  Tint 
Adjust the color balance of red and green.
 Press the  to increase the amount of green in the image.
 Press the  to increase the amount of red in the image.
 Sharpness 
Adjust the sharpness of the image.
 Press the  to decrease the sharpness.
 Press the  to increase the sharpness.      
						

							
English


User Controls

Image | Advanced
 Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of vis-
ible noise interlaced signals. The range is from “0” to “10”. (0:Off)
 Gamma
This allows you to set up gamma curve type. After the initial setup 
and fine tuning is completed, utilize the Gamma Adjustment steps 
to optimize your image output.
 Film: for home theater.
 Video: for video or TV source.
 Graphics: for image source.
 Standard: for standardized setting.
 B/W Extension
Black and White Extension can stretch the black and white levels 
to automatically increase the contrast of input image. This unit has 
2 pre-set modes that allow the user to switch among the pre-sets 
to obtain different image effects. (Off/On)
 Color Temp
If set to cold temperature, the image looks bluish (cold image). If 
set to warm temperature, the image tends to looks reddish (warm 
image).      
						

							


User Controls

 PureEngine
The PureEngine is a collection of advanced image processing 
technologies that enhances the quality of the displayed image.
 DynamicBlack
DynamicBlack enables the projector to automatically optimize the 
display of dark movie scenes enabling them to be shown in incred-
ible detail.
 RGB Gain/Bias
Press  into the next menu as below and then use  or  to se-
lect item. Use  or  to select Red, Green, or Blue for brightness 
(Gain) and contrast (Bias).      
						

							
English


User Controls

Image | Advanced 
| PureEngine
 PureDetail
PureDetail is an edge enhancement tool that enables the edges in 
the projected image is be enhanced thus providing more perceived 
detail.
 PureColor
This adjustable item utilizes a new color-processing algorithm and 
enhancements to enable the picture’s vividness to be significantly 
increased. The range is from “0” to “5”.
 PureMotion
PureMotion uses sophisticated algorithms to ensure that the natu-
ral motion in the image is preserved.
 PureEngine Demo
This feature enables you to see the difference in the image quality 
between the raw unprocessed image and the image processed as 
processed by the PureEngine. Use this mode to check the adjust-
ments that you make to the PureEngine settings.      
						

							


User Controls

 Format
Use this function to choose your desired aspect ratio.
 4:3: This format is for 4x3 input sources.
 16:9: This format is for 16x9 input sources, like HDTV and DVD 
enhanced for Widescreen TV.
 Native: This format displays the original image without any scal-
ing.
Display
Input Signal
Display area
Picture area
Display on Screen      
						

							
English


User Controls

 LBX: This format is for non-16x9, letterbox source and for users 
who use external anamorphic lens to display 2.35:1 aspect ratio 
using full resolution. 
Detail informations about LBX mode :
1.  Some Letter-Box DVDs are not enhanced for 16x9 TVs. In 
this situation, the image will not look right when displayed in 
16:9 mode. 
In this situation, please try to using the 4:3 mode to view the 
DVD.
If the content is not 4:3, there will be black bars around the 
image in 16:9 display. For this type of content, you can use 
LBX mode to fill the image on the 16:9 display. 
2.   If you use an external anamorphic lens, this LBX mode also 
allows you to watch a 2.35:1 content (include Anamorphic 
DVD and HDTV film source) that support anamorphic wide is 
enhanced for 16x9 Display in a wide 2.35:1 image. 
In this case, there are no black bars. Lamp power and verti-
cal resolution are fully utilized.
 Overscan
Overscan function removes the noise in a video image. Overscan 
the image to remove video encoding noise on the edge of video 
source.
 Edge Mask
 Press the  to reduce the size of an image.
 Press the  to magnify an image on the projection screen.
 V Image Shift
Shift the projected image position vertically. 
 V Keystone
Press the  or  to adjust image distortion vertically and make a 
squarer image.
Each I/O has differ-ent setting of “Over-scan”.
NoteNote      
						

							
0

User Controls

“SuperWide“ is Off“ as default.
How to use “Super-
Wide”
1.  Obtain a 2.0:1 aspect 
ratio screen
2.   Switch SuperWide 
ON
3.    Align the projector 
image correctly on the screen
4.   Enjoy movies without 
black bars
NoteNote
 SuperWide
SuperWide is a feature that uses a special 2.0:1 aspect ratio 
screen enabling both 16:9 and 2.35:1 aspect ratio movies to be 
shown without black bars at the top and bottom of the screen
 Off: Your desired aspect ratio can be selected - 4:3, 16:9, LBX 
and Native.
 On: Only formats 4:3 and 16:9 can be selected.
 Auto: To solve the differences of the film formats, the option can 
keep the format in the same ratio.