Olympus Camera Tg 2 Ihs Instruction Manual

41EN
2 Select the new landmark to be recorded on the 
image using  FG, and press the A button.
3  Select [OK] using FG, and press the A button.
 Rotating images  Rotating images qq [ [yy]]
Submenu 1 Submenu 2
Edit y
1  Use HI to select an image.
2  Press the A button to rotate the image.
3  If necessary, repeat Steps 1 and 2 to make 
settings for other images, and press the   
button.
 
● The new picture orientations will be saved even 
after the power is turned off.
 Erasing images  Erasing images qq...

42EN
3 Repeat Step 2 to select the images to be erased, 
and then press the  button to erase the 
selected images.
4  Use FG to select [Yes], and press the A 
button.
 
● The images with a  R mark are erased.
 To erase all images [All Erase] To erase all images [All Erase]1 Use FG to select [All Erase], and press the 
A button.
2  Use FG to select [Yes], and press the A 
button.
Saving print settings to the image Saving print settings to the image 
data data qq [Print Order] [Print Order] 
● “Print...

43EN
Connecting to Smartphone Connecting to Smartphone 
qq [FlashAir] [FlashAir] 
● Using the FlashAir (with Wireless LAN function) 
card (commercially available), you can connect the 
camera to a Wi-Fi enabled smartphone or PC and 
view or import images from the FlashAir card.
 
● When using a FlashAir card, read the FlashAir card 
instruction manual carefully, and comply with the 
instructions.
Submenu 2 Application
Start/Stop Connect to or disconnect from 
Wi-Fi.
Starting option [Manual Start] or...

44EN
Using an Eye-Fi card Using an Eye-Fi card dd [Eye-Fi] [Eye-Fi]
Submenu 2Application
All Transfers all images.
Sel. Image Transfers only selected image.
Off  Disable Eye-Fi communication. 
 
● When using an Eye-Fi card, read the Eye-Fi card 
instruction manual carefully, and comply with the 
instructions.
 
● This camera does not support the Eye-Fi card’s 
Endless mode.
 
● Before use, refer to “FlashAir/Eye-Fi card” (p. 79).
 Saving custom settings Saving custom settings
d d [Custom Mode...

45EN
Turning on the camera with the Turning on the camera with the qq  
button button dd [ [qq Power On] Power On]
Submenu 2Application
No The camera is not turned on. To 
turn on the camera, press the 
n button.
Ye s
Press and hold the 
q button 
to turn the camera on in the 
playback mode.
Selecting the camera sound and Selecting the camera sound and 
its volume its volume dd [Sound Settings] [Sound Settings]
Submenu 2 Submenu 3 Application
Sound Type
1/2/3 Selects the camera 
sounds (operation...

46EN
Submenu 2Application
ResetThis resets the sequential number 
for the folder name and 
fi le name 
whenever a new card is inserted.*1 
This is useful when grouping 
images on separate cards.
Auto Even when a new card is inserted, 
this continues the numbering for 
the folder name and 
fi le name 
from the previous card. This is 
useful for managing all image 
folder names and  fi les names with 
sequential numbers.
*1  The number for the folder name is reset to 100,  and the one for the fi  le name is...

47EN
  Playing back images on a TV   Playing back images on a TV dd [TV Out] [TV Out]
  The TV video signal system varies depending on the countries and regions. Be\
fore viewing camera images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Submenu 3 Application
NTSC/PAL NTSC
Connecting the camera to a TV in North America, Taiwan, Korea, 
Japan, and so on.
PA L Connecting the camera to a TV in European countries, China, and 
so on.
HDMI Out
480p/576p
720p
1080i Set...

48EN
Connect to the TV video 
input jack (yellow) and 
audio input jack (white).Connect to the HDMI 
connector on the TV.
HDMI micro connector 
(type D) HDMI cable 
(sold separately: CB-HD1) AV cable 
(sold separately: CB-AVC3)
Multi-connector
 
● For details on changing the input source of the TV, refer to the TV’s instruction manual.
 
● When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take 
priority.
 
● Depending on the TV’s settings, the displayed...

49EN
 Saving battery power between  Saving battery power between 
shots shots dd [Power Save] [Power Save]
Submenu 2Application
OffCancels [Power Save].
On When the camera is not being 
used for approx. 10 seconds, the 
monitor automatically turns off to 
save battery power.
To resume standby modeTo resume standby modePress any button.
 Changing the display language  Changing the display language dd  
[[ll]]
Submenu 2
Application
Languages The language for the menus and 
error messages displayed on the...

50EN
 Choosing home and alternate time  Choosing home and alternate time 
zones zones dd [World Time] [World Time] 
● You will not be able to select a time zone using 
[World Time] if the camera clock has not fi  rst been 
set using [X].
Submenu 2 Submenu 3 Application
Home/
Alternate x
The time in the home 
time zone (the time 
zone selected for 
x in 
submenu 2).
z The time in the travel 
destination time zone 
(the time zone selected 
for z in submenu 2).
x
*1— Select the home time 
zone (x).
z
*1, 2—...