Olympus Camera Tg 2 Ihs Instruction Manual

61EN
To exit printingTo exit printingAfter a selected image is displayed on the screen, 
disconnect the USB cable from the camera and 
printer.
Changing the printer’s settings for printing [Custom Print]
1 Display the image to be printed on 
the monitor.
 
● “Viewing images” (p. 20)
2 Turn on the printer, and then 
connect the printer and camera.
3 Press the A button.
4 Use FG to select the print mode, 
and press the A button.
Submenu 2 Application
PrintThis prints the image selected 
in Step 8.
All...

62EN
7 Use HI to select an image.
8 Press F to make a print 
reservation for the current image. 
Press G to make the detailed 
printer settings for the current 
image.
To make the detailed printer settingsTo make the detailed printer settings1 Use FGHI to select the setting, and press the 
A button.
Submenu 5 Submenu 6 Application

63EN
11 Use FG to select [Print], and 
press the A button.
 
● Printing starts.
 
● When [Option Set] is selected in [All Print] 
mode, [Print Info] screen is displayed.
 
● When printing is  fi nished, the [Print Mode 
Select] screen is displayed.
Multi Print
Print Order All IndexAll Print
Print Print
MENUPrint Mode Select Back
To cancel printingTo cancel printing1 
Press the  button while [Do Not Remove 
USB Cable] is displayed.
2  Select [Cancel] using  FG and then press the 
A button.
12 Press the ...

64EN
Reser ving one print each of  all images on the card [
U]
1 Follow Steps 1 and 2 in [ 

65EN
Resetting the print reser vation data for selected images
1 Follow Steps 1 and 2 in [ 

66EN
Usage Tips
If the camera does not work as intended, or if an 
error message is displayed on the screen, and you 
are unsure of what to do, refer to the information 
below to fi x the problem(s).
Troubleshooting
BatteryBattery“The camera does not work even when batteries 
are installed”.
 
● Insert recharged batteries in the correct 
direction.
“Inserting and removing the battery and card 
(commercially available)” (p. 4), “Charging the 
battery” (p. 5)
 
● Battery performance may have been reduced...

67EN
MonitorMonitor“Diffi cult to see”.
 
● Condensation may have occurred. Turn off 
the power, and wait for the camera body 
to become acclimated to the surrounding 
temperature and dry out before taking pictures.
“The light is caught in the picture”.  
● Shooting with  fl ash in dark situations results in 
an image with many  fl ash refl  ections on dust 
in the air.
Date and time functionDate and time function“Date and time settings return to the default 
setting”.
 
● If the batteries are removed and...

68EN
 Error message
 
● When one of the messages below is displayed on 
the monitor, check the corrective action.
Error message Corrective action
Card Error Card problem
Insert a new card.
Write Protect Card problem
The card write-protect switch is 
set to the “LOCK” side. Release 
the switch.
Memory Full
Internal memory problem
•  Insert a card.
•  Erase unwanted images.*1
Card FullCard problem
•  Replace the card.
•  Erase unwanted images.*1
Card Setup
Format
Power Off
Card problem
Use FG to select...

69EN
Error message Corrective action
JammedPrinter problem
Remove the jammed paper.
Settings 
Changed
*3Printer problem
Return to the status where the 
printer can be used.
Print Error Printer problem
Turn off the camera and printer, 
check the printer for any 
problems, and then turn the 
power on again.
Cannot Print*4Problem with selected image
Use a computer to print.
Caution: Depth
Depth problem
The depth exceeds 15m. Please 
use at depths of 15m or less.*3  This is displayed, for instance, when the...

70EN
Shooting tips
When you are unsure of how to take a picture that 
you envision, refer to the information below.
 Focusing
“Focusing on the subject” 
● Taking a picture of a subject not in the 
center of the monitor
After focusing on an object at the same 
distance as the subject, compose the shot, and 
take the picture.
Pressing the shutter button halfway (p. 11)
 
● Set [AF Mode] (p. 32) to [Face/iESP]
 
● Taking a picture in [AF Tracking] mode (p. 32)
The camera tracks the subject movement...