Olympus Camera Tg 2 Ihs Instruction Manual

DIGITAL CAMERA
Instruction Manual
TG-2
●  Thank you for purchasing an Olympus digital camera. Before you start to \
use your new camera, please read these instructions carefully to enjoy optimum performance and a lon\
ger service life. Keep this 
manual in a safe place for future reference.
●  We recommend that you take test shots to get accustomed to your camera be\
fore taking important  photographs.
●  In the interest of continually improving products, Olympus reserves the \
right to update or modify...

2EN
Checking the contents of the box
or
Digital camera Strap Lithium Ion Battery 
(LI-90B) USB-AC adapter 
(F-2AC) USB cable 
(CB-USB8) OLYMPUS Setup 
CD-ROM
Lens ring
Names of PartsNames of Parts
1
2
3
5
4
6 7 8
10
9
1213
11
143
1 Connector cover2  Connector cover lock3 LOCK knob4 Speaker5 Multi-connector6  HDMI micro connector7 Strap eyelet8  Self-timer lamp/LED Illuminator/
AF illuminator
9 Flash10 Lens11 Lens ring12 Tripod socket13 Battery/card cover14 Battery/card cover lock
Other accessories not...

3EN
1
25
6
3
7
8
9 4
1312
1011
1 Stereo microphone2 GPS antenna3 Monitor4 Shutter button5 Indicator lamp6 n button7 Zoom buttons8 
R button (shooting movies)9 Mode dial10 q button (switching between 
shooting and playback)
11 Arrow pad INFO (changing information display)
  # (fl  ash)
  Y (self-timer)
  (erase)12 A button (OK)13  button
Attaching the camera strapAttaching the camera strap123
  Pull the strap tight so that it does not come 
loose.
Arrow pad
H (left)
G (down) F (up)
I (right)A
 FGHI...

4EN
 Inserting and removing the batter y and card (commercially available)
1 Follow Steps  1, 2 and 3 to 
open the battery/card cover.
3
1
2
Battery/card cover
Battery/card 
cover lock
LOCK knob
  Turn off the camera before opening the battery/
card cover.
2 Insert the battery while sliding the 
battery lock knob in the direction 
of the arrow.
Battery lock knob
  Insert the battery as illustrated with the C mark toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) 
may produce...

5EN
4  Follow Steps 1, 2 and 3 to 
close the battery/card cover.
3
211
  When using the camera, be sure to close and 
lock the battery/card cover.
 Charging the batter y
Connect the USB cable and USB-AC adapter to the 
camera and charge the battery.
For charging the battery abroad, see “Using your 
charger and USB-AC adapter abroad” (p. 79).
 
● The battery is not fully charged at shipment. Before 
use, be sure to charge the battery until the indicator 
lamp turns off (up to 4 hours).
 Connecting the...

6EN
When to charge the batteriesWhen to charge the batteriesCharge the battery when the error message shown 
below appears.
Battery Empty
Error message
Flashes in red
  Never use any cable other than supplied or  Olympus-designated USB cable. This may cause 
smoking or burning.
  The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs 
depending on the region where you purchased 
the camera. If you received a plug-in type USB-
AC adapter, plug it directly into AC outlet.
  The...

7EN
 Turning on the camera and making the initial settings
When you turn on the camera for the fi  rst time, a 
screen appears enabling to set the language for the 
menus and messages displayed in the monitor, and 
the date and time.
To change the selected date and time, see “Setting 
the date and time d [X]” (p. 49).
1 Press the n button to turn 
on the camera, press FGHI 
of the arrow pad to select your 
language and press the  A button.
2 Press FG of the arrow pad to 
select the year for [Y]....

8EN
Before Using GPS
The camera’s GPS (Global Positioning System) 
feature determines your position (latitude and 
longitude) and stores this information with pictures 
taken with the camera. 
The camera uses supplementary orbital data 
(assisted GPS or A-GPS) for improved signal 
acquisition.
A-GPS data must be updated every 14 days.
Before using GPS, you will need to set the camera 
clock to the correct date and time. (p. 49)
Updating A-GPS DataUpdating A-GPS Data
1 Install the update software...

9EN
2 Press INFO button in the shooting 
display.
 
● The displays change in the order of Normal  → 
Detailed  → No info. → Measurement position 
information each time  F (INFO) is pressed.
 
● Nearby landmarks in the GPS database will 
be displayed.
OK
---------
Updated 1 min ago
2013/02/2612:30
Latitude/LongitudeN123°56 78
E123°56 78Barometer877hpaAltitude/Water Depth1200m
LOGMENUBack
Update GPS
4
3
21
098765
1 Landmark name
2 Landmark information  position
3 Electronic compass
4 Update status
5 GPS...

10EN
Learning how to use the camera
 
● Press the n button to turn on the camera and 
enter the standby mode. (Press the n button 
again to turn off the camera.) 
 
● Select the shooting mode, and press the shutter 
button to shoot a still image.
 
● To shoot a movie, press the R button. 
 
● Set the shooting functions using the function 
menu or the setup menu.
 
● To view images, press the q button to switch to 
playback mode.
 
● To return to standby mode, press the q button 
again, or press the...