OKI MC860cdtn User Manual

Configuring Your Machine > 41
Scanner 
Setup
Default 
SettingsDoc. Type Doc. Type:
Text, Text&Photo, 
Photo, Extra Fine Allows you to specify the type of 
images on the document.
Removal for 
Background & 
Show-Through 
(sTHR): 
Auto , OFF, 1(Low), 
2, 3, 4, 5(High), 
sTHR Allows you to block out the color 
background of the image 
(assuming document has a color 
background) - such that the 
background color is not printed.
Use Show-Through when copying 
documents that are printed on 
both sides (for...

Configuring Your Machine > 42
Scanner 
Setup
(cont.)
Default 
Settings
(cont.)FileFormat Color:
PDF, TIFF, JPEG, XPS
Mono (Grayscale):
PDF , TIFF, JPEG, XPS
Mono (Binary):
PDF , TIFF Select the appropriate file format.
ComprsRt Color: High, Medium, Low
Mono (Grayscale):
High, Medium,  Low
Mono (Binary):
High (G4) , Medium 
(G3), Raw Select the appropriate 
compression level. Remember the 
higher the compression the bigger 
the file size!
EdgeErase OFF,  ON Adjust the width settings using the 
arrow...

Configuring Your Machine > 43
Scanner 
Setup
(cont.)
Default 
Settings
(cont.)RGB [R] -3, -2, 
-1, 0, +1, +2, +3
[G] -3, -2, 
-1,  0, +1, +2, +3
[B] -3, -2, 
-1,  0, +1, +2, +3 Adjust RGB contrast settings.
E-mail 
Setup File Name
User defined Use the on-screen keyboard to 
enter a file name.
Template Edit  Subject Enter standard e-mail subject text.  Max. 80 characters.
You can create up to 5 different e-
mail templates 
Edit Body Enter standard e-mail body text.  Max. 256 characters.
You can create up...

Configuring Your Machine > 44
Print Setup Print Menu Tray 
ConfigurationPaper Feed:
Tray n
, MPTray Specifies a feed tray (where n 
identifies the tray).
Auto Tray Switch:
OFF,  ON Sets the automatic tray switch 
function.
Tray Sequence:
Down , Up, Paper 
Feed Tray Specifies selection order priority 
for automatic tray selection/
automatic tray switch.
MP Tray Usage:
When Mismatch,  Do 
Not Use When Mismatch: If a paper size or 
type in a tray is not matched to 
that of the print data, use paper 
from...

Configuring Your Machine > 45
Print Setup 
(cont.)
Print Menu 
(cont.)Print Setup 
(cont.) Mono-Print Speed:
Auto Speed
, Mono 
34PPM, Mixed Speed, 
Color Speed Auto Speed
: If the first page of a 
print job is blac k and white, the 
machine runs at 34ppm (pages per 
minute). When a color page is 
detected the machine slows down 
to 26ppm for the rest of the job.
Mono 34PPM : This setting 
operates in the same way as auto 
speed, except that the machine 
runs at 34ppm until a color page is 
detected. To...

Configuring Your Machine > 46
Print Setup 
(cont.)
Print Menu 
(cont.)Print Setup 
(cont.) Width:
2.5~
8.5~11.7 inches Selects the widt
h of the paper 
defined by the “C ustom” settings. 
Length:
4.1~ 11~48 inches Selects the length of the paper 
defined by the “C
ustom” settings. 
Note that media of up to 1200 mm 
in length can be fed from the multi 
purpose tray for banner printing.
Printer Adjust Manual Timeout: Disable, 30 seconds, 
60 seconds Specifies how many seconds the 
machine will wait for...

Configuring Your Machine > 47
Print Setup 
(cont.)
Print Menu 
(cont.)Printer Adjust 
(cont.) BG Setting:
-3, -2, -1, 
0, +1, +2, 
+3 To correct variations in print 
results caused by temperature/
humidity conditions and difference 
in print density/frequency.
Change the setting when 
background is dark.
Print Position 
Adjust Front X Adjust: 
-2.00~
0~+2.00  mm
Front Y Adjust: 
-2.00~ 0~+2.00  mm
Back X Adjust: 
-2.00~ 0~+2.00  mm
Back Y Adjust: 
-2.00~ 0~+2.00  mm X adjust: Adjusts the position of...

Configuring Your Machine > 48
Print Setup 
(cont.)
Color Menu 
(cont.)Cyan 
HIGHLIGHT -3, -2, -1, 
0, +1, +2, 
+3 Adjusts image density for each 
color component (cyan, magenta, 
yellow and black)
. Normal setting 
is 0.
Cyan MID-TONE -3, -2, -1, 
0, +1, +2, 
+3
Cyan DARK -3, -2, -1,  0, +1, +2, 
+3
Magenta 
HIGHLIGHT -3, -2, -1, 
0, +1, +2, 
+3
Magenta MID-
TONE -3, -2, -1, 
0, +1, +2, 
+3
Magenta DARK -3, -2, -1,  0, +1, +2, 
+3
Yellow 
HIGHLIGHT -3, -2, -1, 
0, +1, +2, 
+3
Yellow MID-
TONE -3, -2,...

Configuring Your Machine > 49
Print Setup 
(cont.)
Color Menu 
(cont.)UCR
Low, Medium, High Selects the limitation of the toner 
layer thickness.
If paper curl occurs in dark 
printing, selecting Medium or Low 
sometimes helps reduce curl.
CMY100% 
Density Disable
, Enable When enabled, black areas are 
produced using 100% C, M, and Y 
instead of black. This results in a 
glossier finish.
CMYK 
Conversion OFF, 
ON Setting to OFF will simplify the 
conversion process of CMYK data, 
which will reduce...

Configuring Your Machine > 50
Print Setup 
(cont.)
PCL Setup 
(cont.)A4 Print Width
78 Column, 80 
Column Sets the number of columns 
subject to Auto LF with A4 paper in 
PCL. This is the value when Auto 
CR/LF Mode is set to OFF with the 
10CPI character.
White Page Skip OFF, ON Selects whether blank pages are 
printed or not.
CR Function CR, CR+LF Selects whether a received 
carriage return character (0Dh) 
also causes a line feed.
LF Function LF, LF+CR Selects whether a received line 
feed character...