OKI MC360 User Manual

Maintenance > 111
10.Push the two retaining levers towards the re ar of the printer to lock the fuser in 
place.
11. Close the printer top cover and press down  firmly so that the cover latches closed.
12. Gently  lower the scanner on to its supports.
13. Switch the MFP ON.
CLEANING
From time to time print “debris” such as ink,  toner and paper dust will accumulate in the 
ADF and on the document glass from  documents which have been copied.
...THE LED HEAD
Clean the LED head when printing does not come...

Maintenance > 112
1.Lift the scanner.
2. Press the cover release (a) and open the top cover of the printer (b) fully.
3. Gently wipe the LED head surface (1) with LE D lens cleaner or a soft lint free cloth.
4. Close the printer top cover and press down  firmly so that the cover latches closed.
5. Gently  lower the scanner on to its supports.
< < < < 
a
b
1
Downloaded From ManualsPrinter.com Manuals 

Maintenance > 113
...THE PAPER PATH IN THE ADF
If marks are found on an image which has been read by the ADF, or the ADF does not feed 
documents smoothly, follow the cleaning procedure below.
1. Switch the MFP OFF.
2. Open the ADF top cover.
3. Pinch the ADF lock lever and swing the f eeder mechanism up until it is locked.
4. Moisten a soft, clean lint free cloth and remove any marks by wiping the cloth in the 
direction of the arrow, as shown.
5. Return the feeder mechanism  to its original position....

Maintenance > 114
...THE DOCUMENT GLASS
The document glass needs to be cleaned occasionally to ensure optimum image quality and 
performance.
1. Open the document cover.
2. Moisten a soft, clean, lint free cloth and remove any marks, as shown.
3. Close the document cover.
Downloaded From ManualsPrinter.com Manuals 

Installing additional memory > 115
INSTALLING ADDITIONAL MEMORY
This section explains how to install additional RAM memory into your MFP as a memory 
upgrade.
The basic MFP model comes equipped with 128M B of memory (64 Mb “on-board” and 64 
Mb in the option slot). This can be upgraded  by substituting the option memory (64Mb) 
with a memory board containing 256MB, givi ng a maximum total memory capacity of 
320MB.
1. Switch the MFP off and disconnect the AC power cable.
2. Lift the scanner.
3. Press...

Installing additional memory > 116
4.Note the positions of  the 4 cartridges.
5. Remove each image drum units, starting wi th the front. Cover the image drum units 
to protect them from direct light.
1. Cyan cartridge 3. Yellow cartridge
2. Magenta cartridge 4. Black cartridge
CAUTION!
The green image drum surface at the base of each cartridge is very 
delicate and light sensitiv e. Do not touch it and do not expose it to 
normal room light for more than 5  minutes. If the drum unit needs 
to be out of...

Installing additional memory > 117
6.Locate the two fasteners (1) at each side of the belt (3) and the lifting bar (2) at the 
front end. Turn the two fasteners (1) 90° to the left. This will release the belt from 
the printer chassis.
7. Unlock the fasteners and re move the belt as shown.
8. Carefully remove the new memory board from  its wrapping. Try to handle the board 
only by its short edges, avoiding contact wi th any metal parts as far as possible. In 
particular, avoid touching the edge...

Installing additional memory > 118
9.Identify the RAM expansion slot in the printer. Unclip the plastic cover to open this 
slot.
10. As the RAM expansion slot already contains  a memory board (64Mb), this board will 
have to be removed before you can instal l the new one. To remove it proceed as 
follows:
(a) Identify the locking clips at each end of the RAM expansion slot.
(b) Push the clips outward and back into the printer. The board will pop out slightly.
(c) Grip the board firmly by its shor t...

Installing additional memory > 119
18.When the MFP is ready, check the memory status as follows:
(a) Using the  Down arrow key, scroll down to  Menu and press  Enter.
(b) Using the  Down arrow key, scroll down to  View Information then press Enter.
(c) Using the  Down arrow key, scroll down to  System Menu then press Enter.
(d) Using the  Down arrow key, scroll down to  Total Memory.
(e) Pressing the  Enter key will confirm the total memory installed.
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting > 120
TROUBLESHOOTING
CLEARING PAPER JAMS
Provided that you follow the recommendations in this guide on use of print media, and you 
keep the media in good condition prior to use,  your printer should give years of reliable 
service. However, paper jams occasionally do o ccur, and this section explains how to clear 
them quickly and simply.
One of the main causes of paper jams is media  that has been left in the cassette tray while 
the machine is in a high humidity environmen t...