OKI C9600HDTN User Manual

							C9600 User’s Guide> 51
CONNECTING THE NETWORK INTERFACE
1.Turn off the printer and the computer.
2.Connect an Ethernet cable between the printer and an 
Ethernet hub.
3.Turn on the printer and then the computer.
If your printer is to be installed as a network printer, please refer 
to the relevant section in the Configuration Guide for further 
details on how to configure the network connection before 
installing the printer drivers.
CAUTION!
Do not connect a USB cable into the network interface 
connector as this may lead to malfunction.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 52
NOTE
Administrator’s authority is required when installing a network 
connection.
USING THE DRIVERS CD
Insert the Drivers CD into your computer and follow the on-
screen instructions. You are prompted to follow a set of basic 
steps to configure the display panel language, install drivers and 
other software and finally print a test page to check that your 
printer is operating correctly thus far.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 53
OPERATION
USING THE PRINTER
For full details of how to use the printer and any optional 
accessories to print jobs efficiently and effectively, please refer to 
the Printing Guide.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 54
CONSUMABLES AND MAINTENANCE
This section explains how to replace consumable and 
maintenance items when due. As a guide, the life expectancy of 
these items is:
>Toner — 15,000 A4 pages at 5% coverage.
The printer is shipped with sufficient toner for 7,500 A4 
pages in the print cartridges of which 1 – 2,000 A4 pages 
of toner are used to charge the image drum.
>Image drum — 30,000 A4 pages average life
>Transfer belt — Approximately 100,000 A4 pages
>Fuser — Approximately 100,000 A4 pages
CHECKING CONSUMABLE/MAINTENANCE ITEM USAGE
At any time, you can check how much of each consumable/
maintenance item is left by using the appropriate menus. For 
example, enter the menu system and follow the path:
Configuration>Supplies Life>Cyan Toner
The percentage of Cyan Toner remaining is displayed on the LCD 
panel and the printer then returns to the ready to print status.
REPLACEMENT INDICATIONS
The LCD panel provides messages to the effect that 
consumables/maintenance items are running low or nearing end 
of life followed some time later by a message that replacement is 
required. You should replace the item as soon as possible after 
this message is displayed to avoid the possibility of print quality 
being compromised.
The paper feed rollers and the multi-purpose (MP) tray feed 
rollers do not have any replacement warning messages. 
Recommended replacement: after approximately 120,000 A4 
sheets.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 55
CONSUMABLE ITEM ORDER INFORMATION
MAINTENANCE ITEM ORDER DETAILS
ITEMLIFEORDER NUMBER
Toner, Black 15,000  pages @ 5% 42918916
Toner, Cyan 15,000  pages @ 5% 42918915
Toner, Magenta 15,000  pages @ 5% 42918914
Toner, Yellow 15,000  pages @ 5% 42918913
To n e r,  r a i n b o w  p a c k 
(1 ea. CMYK toner)15,000 A4 pages @ 5% 43112702
Image drum, Black 30,000  pages avg 42918108
Image drum, Cyan 30,000  pages avg 42918107
Image drum, Magenta 30,000  pages avg 42918106
Image drum, Yellow 30,000  pages avg 42918105
Staples 3 x 3000 staples 42937603
ITEMLIFEORDER NUMBER
Fuser unit 100,000  pages 42931703
Belt unit 100,000  pages 42931603
Waste toner  30,000  pages avg 42869403
Hopping roller set 
(Tray)120,000  pages 42931803
Hopping roller set (MPT) 120,000  pages 42939703
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 56
REPLACING CONSUMABLES/MAINTENANCE ITEMS
Each consumable or maintenance item comes complete with its 
own installation details which give full instructions on 
replacement. You are advised to follow these instructions 
carefully.
CLEANING THE LED HEADS
You are advised to clean the LED heads:
>any time you replace a toner cartridge (a LED lens cleaner 
is enclosed with each replacement toner cartridge)
>if printing is showing signs of faded images, white stripes 
or blurred letters
You can use a LED lens cleaner or dry, soft cloth for cleaning the 
LED heads.
1.Open the top cover.
CAUTION!
Only use genuine Oki Original consumables to ensure 
the best quality and performance from your hardware. 
Non-Oki Original products may damage your printer’s 
performance and invalidate your warranty. 
Specifications subject to change without notice. All 
trademarks acknowledged.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 57
2.With an LED lens cleaner or soft cloth, gently wipe each of 
the four heads (1). Move the cleaner as shown, using a 
clean section of the cleaner with each pass. Be careful not 
to damage the guards (2).
3.Close the top cover.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 58
CLEANING THE PAPER FEED ROLLERS
Clean the paper feed rollers if paper jams frequently occur.
1.Remove items like a wrist watch or bracelet and follow the 
correct steps to turn the printer off.
2.Open Tray 1 side cover.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 59
3.Remove Tray 1 completely from the printer.
4.Gaining access through the gap left by Tray 1, wipe the 3 
paper feed rollers (2) with a soft cloth lightly moistened 
with water.
2
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 60
5.Replace Tray 1.
6.Close Tray 1 side cover.
Downloaded From ManualsPrinter.com Manuals