OKI C9600HDTN User Manual

							
USER’S GUIDE
C9600n/C9600dn/C9600hdn/C9600hdtn
 
C9600
C9000
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 2
PREFACE
Every effort has been made to ensure that the information in this document is 
complete, accurate, and up-to-date. Oki assumes no responsibility for the results of 
errors beyond its control. Oki also cannot guarantee that changes in software and 
equipment made by other manufacturers and referred to in this guide will not affect 
the applicability of the information in it. Mention of software products manufactured 
by other companies does not necessarily constitute endorsement by Oki.
While all reasonable efforts have been made to make this document as accurate and 
helpful as possible, we make no warranty of any kind, expressed or implied, as to 
the accuracy or completeness of the information contained herein.
The most up-to-date drivers and manuals are available from the Oki web site:
http://www.okiprintingsolutions.com
Copyright © 2005 Oki Printing Solutions
Oki and Microline are registered trademarks of Oki Electric Industry Company, Ltd.
ENERGY STAR is a trademark of the United States Environmental Protection Agency.
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft 
Corporation.
Other product names and brand names are registered trademarks or trademarks of 
their proprietors.
As an ENERGY STAR Program Participant, the manufacturer has 
determined that this product meets the ENERGY STAR guidelines 
for energy efficiency.
This product complies with the requirements of the Council 
Directives 89/336/EEC (EMC), 73/23/EEC (LVD) and 1999/5/EC 
(R&TTE), as amended where applicable, on the approximation of 
the laws of the member states relating to Electromagnetic 
Compatibility, Low Voltage and Radio & Telecommunications 
Terminal Equipment.
This printer is equipped with the following embedded RFID read/write system:
Product name : Embedded RFID Read/Write System 
Model number : RX4004A
The label on the RFID unit contains the following information:
Oki Data Corporation 
Model number : RX4004A 
Serial number : 
Complies with IDA Standards DB100707
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 3
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 4
NOTES, CAUTIONS AND WARNINGS!
NOTE
A note provides additional information to supplement the main 
text.
CAUTION!
A caution provides additional information which, if 
ignored, may result in equipment malfunction or 
damage.
WARNING!
A warning provides additional information which, if 
ignored, may result in a risk of personal injury.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 5
SAFETY WARNINGS
This product has been carefully designed to give years of safe, 
reliable performance. As with all electrical equipment, however, 
there are a few basic precautions that should be taken to avoid 
injury or damage, therefore please be careful to read and 
understand the safety warnings on the following pages before 
operating the product.
WARNING!
Ensure all warning and instruction labels on 
this product are read, understood and followed 
in order to prevent any risk of injury.
Ensure this and all other documentation is both 
read carefully and retained for future 
reference.
This product may be heavy. Please check the 
weight of this product and take all necessary 
precautions to prevent any risk of personnel 
injury.
This product must be placed on a flat solid 
surface strong enough to support its weight to 
prevent any risk of injury.
Ensure that there is adequate ventilation all 
around this product to prevent overheating and 
any risk of fire.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 6
WARNING!
Keep this product away from direct heat 
sources such as radiators and out of direct 
sunlight to prevent any risk of overheating.
The power supply required for this product is 
220 - 240 VAC, 50/60 Hz. Refer to your 
products rating label for full power rating 
details. Ensure that you have a suitable power 
supply before connecting the product. If in 
doubt contact your dealer or check with your 
local power provider.
Ensure both the product and mains power 
switches are in the OFF position before 
connecting the AC power cable.
This product has an earthed plug as a safety 
feature and will only connect to an earthed 
socket. Do not attempt to defeat the earthing 
or there is a risk of fire or shock.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 7
WARNING!
If using an extension cable or power strip 
ensure that the total current rating (amperes) 
of all connected equipment is less than the 
maximum rating of the extension cable, power 
strip or wall outlet. Otherwise fire or shock 
may occur.
If this product is already supplied with a fitted 
power strip then NO additional power strip or 
extension cable should be used to connect to 
the mains wall outlet.
Ensure the power cable is routed so as not to 
be damaged or cause a trip hazard. If the cable 
becomes frayed or damaged, replace it 
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable 
as this can cause overheating which may lead 
to fire or electric shock.
Ensure the power socket to which this product 
is connected is easily accessible at all times.
Do not connect or disconnect the power plug 
with a wet hand as this may cause electric 
shock.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 8
WARNING!
Always hold the power plug to connect/
disconnect the power cable to/from the mains 
socket. Unplugging by pulling on the cable can 
cause fraying and may lead to fire or electric 
shock.
Use only the power cable and power strip 
supplied. Using a power cable or power strip 
not intended for this product may lead to fire or 
electric shock.
To avoid risk of fire and electric shock, do not 
use the power cable or power strip supplied 
with this product for any other electrical 
equipment.
If you do not connect the power cord or any 
other cables only as directed in the Users 
Guide, this may result in a fire.
Ensure loose clothing and hair are kept clear of 
moving parts when this product is in operation 
to prevent possible risk of injury.
It is recommended that this product is 
switched off prior to opening any covers.
When this products cover is open, do not touch 
the fuser unit or print head as you may receive 
burns. Allow them to cool before touching.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 9
WARNING!
If this products casing gets extremely hot or 
smoke, unusual smells or abnormal noises are 
emitted from this product, there is a risk of fire. 
Unplug the mains connector and contact your 
dealer. 
If this product has been knocked over or 
damaged, there is a risk of electric shock, fire 
and/or injury. Unplug the mains connector and 
contact your dealer.
If any liquid (for example water) is allowed to 
enter this product, there is a risk of fire. Unplug 
the mains connector and contact your dealer.
Do not place containers containing liquid on 
this product as electric shock, fire and/or 
injuries may occur.
If any foreign objects (for example clips) are 
allowed to enter this product, there is a risk of 
electric shock, fire and/or injury. Unplug the 
mains connector before removing the object.
Do not introduce foreign objects into the 
ventilation holes or operate this product with 
covers open or removed as electric shock, fire 
and/or injuries may occur.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 10
WARNING!
Do not use an extremely flammable spray near 
this product as the product contains high 
temperature parts that may cause a fire.
Switch this product off before cleaning to 
prevent any risk of injury. Clean using a damp 
cloth. Do not use liquid or aerosol cleaners.
Do not carry out any operations on this product 
that are not specified in the Users Guide. This 
may result in electric shock, fire and/or injury.
Do not touch the battery if one is fitted to the 
product. There is a risk of explosion if the 
battery is replaced by an incorrect type. The 
product battery should not require replacement 
during the life of the printer.
After installing additional memory, hard disk 
drive or any other internally fitted option, any 
covers removed or doors opened must be 
closed or replaced and secured to prevent any 
risk of fire or electric shock.
Downloaded From ManualsPrinter.com Manuals