OKI C9600HDTN User Manual

							C9600 User’s Guide> 31
the face-up paper stacker. This ensures that the paper path through 
the printer is almost straight.
The multi-purpose tray can feed paper widths as small as 76.2mm 
and lengths up to 1200mm. For banner printing, recommended 
sizes are A4 wide, 900mm and 1200mm long and weight 128g/m². 
Since paper of width less than 100mm does not autofeed, you have 
to press the ONLINE button to cause it to feed.
Use the multi purpose tray for printing on envelopes and 
transparencies. Up to 100 sheets of transparencies or 25 envelopes 
can be loaded at one time, subject to a maximum stacking depth of 
25mm.
Paper or transparencies should be loaded print side up and top edge 
into the printer. Do not use the duplex (two-sided printing) function 
for transparencies.
FACE-DOWN STACKER
The face-down stacker on the top of the printer can hold up to 500 
sheets of 80g/m² standard paper, and can handle paper stocks 
from 64 – 216g/m². Pages printed in reading order (page 1 first) 
will be sorted in reading order (last page on top, facing down).
FACE-UP STACKER
The face-up stacker should be opened and the tray extension pulled 
out when required for use. (With the face-up stacker either open or 
closed, the driver setting of Face Down will successfully direct prints 
to the Face-Down stacker.)
The face-up stacker can hold up to 250 sheets of 80g/m² standard 
paper and can handle stocks up to 268g/m².
Always use this stacker and the multi-purpose feeder for paper 
stocks heavier than 216g/m².
DUPLEX UNIT (IF INSTALLED)
This unit provides automatic two-sided printing on plain paper fed 
from Trays 1 – 5 or the MP Tray. Applicable paper sizes are A6, A5, 
B5, B5LEF, Executive, A4, A4LEF, Letter, LetterLEF, Legal 13 in, 
Legal 13.5 in, Legal 14 in, B4, Tabloid, Tabloid Extra, A3, A3 Wide, 
A3 Nobi, Custom size (100 – 328mm wide, 148 – 457.2mm long), 
using paper stocks in the range 64 – 120g/m².
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 32
TRAY AND STACKER EXAMPLES
LOADING TRAYS 1 TO 5
Tray 1 is used in the following example.
1.Pull out the tray.
2.Press the paper rear stopper tab (1) and adjust the tab to 
the required paper size.
3.Fan the paper to be loaded then tap the edges of the stack 
on a flat surface to make it flush.
1
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 33
4.Load the paper (face down and top edge towards the right 
for headed paper), press the tab (2) on the paper guide 
and adjust the guides (3) for a snug fit to the paper.
To avoid paper jams:
>Do not leave space between the paper and the guides 
and rear stopper.
>Do not overfill the paper tray. Capacity depends on the 
paper type.
>Do not load damaged paper.
>Do not load paper of different sizes or types at the 
same time.
23
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 34
5.Gently push the tray back into the printer.
USING THE MP TRAY
1.Squeeze the handle (1) and open the multi-purpose tray. 
1
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 35
2.Fold out the paper support section and swivel out the 
extension supports (2).
3.Adjust the paper guides (3) to the size of the paper being 
used.
4.Fan the paper to be loaded then tap the edges of the stack 
on a flat surface to make it flush.
2
3
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 36
5.Load the paper.
>For single-sided printing on headed paper, load the 
paper into the multi-purpose tray with pre-printed side 
up and top edge into the printer.
>For two-sided (duplex) printing on headed paper, load 
the paper with pre-printed side down and top edge 
away from the printer. (The duplex unit must be 
installed for this function.)
>Envelopes should be loaded face-up with long edge 
into the printer. Do not select duplex printing on 
envelopes.
>Do not leave space between the paper and the guides.
>Do not exceed the paper capacity of approximately 230 
sheets, 100 transparencies or 25 envelopes. Maximum 
stacking depth is 25mm.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 37
USING THE STACKERS
Face-down stacker
When the face-up stacker (1) on the left side of the printer is 
closed (its normal position), paper is ejected to the face-down 
stacker on the top of the printer.
Face-up stacker
The face-up exit path is used for heavy paper (cardstock etc.), 
envelopes, transparencies, and labels.
1.Open the stacker (1).
1
1
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 38
2.Flip out the paper support (2).
3.Swivel out the paper support extension (3).
2
3
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 39
CONTROL PANEL
The control panel can be swivelled to 90° (maximum) upwards 
from its base position (1) as required for ease of use.
CONTROLS AND INDICATORS
The parts of the control panel are identified and briefly explained 
below:
1. Shutdown/Restart button
Hold down for more than 2 seconds for a soft shutdown. 
You can then press this button again for a restart or use 
the Power switch to turn off the printer completely.
1
12
345
6 78
910
11
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 40
2. Ready indicator
On: indicates ready to print
Flashing: indicates processing print data
Off: indicates unable to receive data (offline)
3. Attention indicator
Off: indicates normal operation
Flashing: indicates error(s) present but printing can 
continue
On: indicates error(s) present and printing cannot continue
4. LCD panel
Displays status and setup information for the printer and 
user help information in your chosen language
5. Up-arrow button
Enters menu mode and enables upward movement 
through the displayed list of menu items
6. Down-arrow button
Enters menu mode and enables downward movement 
through the displayed list of menu items
7. Back button
Returns to the previous higher level menu item
8. Enter button
Enters menu mode and selects the menu item highlighted 
in the LCD panel
9. Online button
Switches between online (printer ready to receive data) 
and offline (printer not ready to receive data)
10. Cancel button
Cancels current print job
11. Help button
Provides additional textual or image data to supplement 
what is displayed on the LCD panel
Downloaded From ManualsPrinter.com Manuals