OKI C7350DTN User Manual

C7350/7550 User’s Guide: Windows XP Operation  •  201
11.Select Print Using Active Overlays.  C93_XP_PCL_Overlay3.bmp 
12.Click OK.
13.Click OK to close the Printing Preferences dialog box.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows XP Operation  •  202
Printing Posters
PCL Only  
This option allows you to configure and print posters by breaking 
up the document page into multiple pieces.  Each piece prints, 
enlarged, on a separate sheet. Then, the separate sheets are 
combined to produce a poster. It is only available with the PCL 
printer driver.
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, on the General tab, click the 
appropriate PCL driver. Click the...

C7350/7550 User’s Guide: Windows XP Operation  •  203
4.Click Options... and enter the configuration details. C93_XP_PCL_Poster2.bmp  
5.Click OK twice.
6.Click Print.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows 2000 Printer Drivers  •  204
Windows 2000
Printer Drivers
See your printed Software Installation Guide for information on 
installing printer drivers.
You can also go to http://my.okidata.com to view and/or 
download a copy of the Software Installation Guide or for the latest 
information on drivers for your printer.
Which Printer Driver to Use?  
Your printer comes with Windows drivers for PCL and Adobe® 
PostScript® (PS). You can install either of these, or both if you...

C7350/7550 User’s Guide: Windows 2000 Printer Drivers  •  205
Memory: Enabling
PostScript Only 
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
If you have additional memory in your printer, use these 
instructions to update the Windows PostScript driver so that it 
recognizes the additional memory:
1.Click Start → Settings...

C7350/7550 User’s Guide: Windows 2000 Printer Drivers  •  206
Hard Disk Drive: Enabling
PostScript 
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File.  Click Properties.
3.Click the Device Settings tab.
4.Under Installable Options, make sure Hard...

C7350/7550 User’s Guide: Windows 2000 Printer Drivers  •  207
Hard Disk Drive: Enabling
PCL  
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File.  Click Properties.
3.On the Device Option tab, click Printer Hard Disk.
4.Click OK.  Close the Printers...

C7350/7550 User’s Guide: Windows 2000 Printer Drivers  •  208
Paper Trays: Enabling
PostScript 
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File.  Click Properties.
3.Click the Device Settings tab. Under Installable Options, 
click Available Trays,...

C7350/7550 User’s Guide: Windows 2000 Printer Drivers  •  209
Additional Paper Trays: Enabling
PCL  
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File.  Click Properties.
3.On the Device Option tab, select the appropriate number of 
trays (not...

C7350/7550 User’s Guide: Windows 2000 Printer Drivers  •  210
Duplex Unit: Enabling
PostScript  
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File.  Click Properties.
3.Click the Device Settings tab. Under Installable Options, 
click Duplex. In the...