OKI C7350DTN User Manual

C7350/7550 User’s Guide: Windows XP Operation  •  161
 
Important!
If you are using heavy media, transparencies, envelopes or 
labels, use the face up (straight through) paper feed path.  
For face up printing (straight-through path), make sure the 
rear exit is open and the paper support is extended. 
• Paper is stacked in reverse order.
• Tray capacity is about 100 sheets, depending on paper 
weight. 
 rear exit openK.eps  
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows XP Operation  •  162
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, on the General tab, click the 
appropriate PCL driver. Click the Preferences button.
3.On the Setup tab, under Media, in the Size drop-down list, 
select User Defined Size.
  C73_XP_PCL_Custom1k.tif  
 
NOTE
You may see a Warning dialog box indicating a conflict. 
If you do, click OK.  
The driver automatically makes the needed changes to 
correct for the conflict....

C7350/7550 User’s Guide: Windows XP Operation  •  163
4.Select the unit. Enter the width and length measurements. 
Custom page sizes range: 
•Width: 3½ to 8½ inches [89 to 216 mm]
•Length: 5 to 14 inches [127 to 356 mm]
  C73_XP_PCL_Custom1k.tif 
5.Click OK.
6.Check that User Defined now appears in the Size list on the 
Setup tab.
 
7.Click OK.
8.Click Print.
NOTE
To save the setting for future use:
•Click Paper Feed Options. 
•Click Custom Size.
•Select the unit. 
•Enter the relevant information for...

C7350/7550 User’s Guide: Windows XP Operation  •  164
Print Resolution
PCL or PostScript
Changing for a Print Job  
 
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, on the General tab, click the 
appropriate driver. Click the Preferences button.
3.Click the Job Options tab.
4.Select the required printing resolution under Quality.
  C73_XP_PS_Resok.tif and C73_XP_PCL_ResoK.tif  
5.Select Toner Saving (if appropriate). 
6.Click OK. Click Print.
NOTE
To change the...

C7350/7550 User’s Guide: Windows XP Operation  •  165
Duplex Printing
(Printing on Both Sides of the Paper)
PostScript  
Usage Restrictions
  
•Standard paper sizes only.
•Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m
²). 
•Paper must be loaded print side up. 
•Only Tray 1, optional Trays 2 and 3, and the High Capacity 
Feeder trays can be used for duplex printing. 
•The Multi Purpose (MP) tray cannot be used for duplex printing.
•Duplexing cannot be used if Paper Weight is set to Ultra Heavy....

C7350/7550 User’s Guide: Windows XP Operation  •  166
Duplex Printing
(Printing on Both Sides of the Paper)
PostScript
Using
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, on the General tab, click the 
appropriate PS driver. Click the Preferences button.
3.On the Layout tab, under Print on Both Sides, select Flip on 
Long Edge or Flip on Short Edge.
4.Click OK. Click Print.
 C73_XP_PS_Duplex2.bmp  
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows XP Operation  •  167
Duplex Printing
(Printing on Both Sides of the Paper)
PCL  
Usage Restrictions
 
•Standard paper sizes only.
•Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m
²). 
•Paper must be loaded print side up. 
•Only Tray 1, optional Trays 2 and 3, and the High Capacity 
Feeder trays can be used for duplex printing.
•The Multi Purpose (MP) tray cannot be used for duplex printing.
 
NOTE
The optional duplex unit must be installed in the printer 
and...

C7350/7550 User’s Guide: Windows XP Operation  •  168
Duplex Printing
(Printing on Both Sides of the Paper)
PCL
Using
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, on the General tab, click the 
appropriate PCL driver. Click the Preferences button.
3.On the Setup tab, under 2-Sided Printing, select Long Edge 
or Short Edge.
4.Click OK. Click Print.
  C73_XP_PCL_Duplex2k.tif 
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows XP Operation  •  169
Printing Booklets
PostScript 
  
  
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, on the General tab, click the 
appropriate PS driver. Click the Preferences button.
NOTES
• You must have the duplex unit installed and 
enabled in order to print booklets.
• Not available on some network connections.  See 
the Help file.
• Some software applications may not support 
booklet printing.
• The right-to-left setting...

C7350/7550 User’s Guide: Windows XP Operation  •  170
3.On the Layout tab, under Pages Per Sheet, select Booklet in 
the drop-down list.
Downloaded From ManualsPrinter.com Manuals