OKI B6500 User Manual

B6500 User’s Guide> 71 Parity None None
Even
OddPress < > or < > 
buttons to toggle between 
None, Even, and Odd.
Press  to save the 
selection.
DTR Ready/
BusyOff Off
OnPress < > or < > 
buttons to toggle between 
Off and On.
Press  to save the 
selection.
DTR On1/Off1 Off Off
OnPress < > or < > 
buttons to toggle between 
Off and On.
Press  to save the 
selection.
DTR Error Off Off
OnPress < > or < > 
buttons to toggle between 
Off and On.
Press  to save the 
selection.
RTS Ready/
BusyOff Off
OnPress <...

B6500 User’s Guide> 72 XON On1/Off1 On Off
OnPress < > or < > 
buttons to toggle between 
Off and On.
Press  to save the 
selection.
XON Error Off Off
OnPress < > or < > 
buttons to toggle between 
Off and On.
Press  to save the 
selection.
DTR Polarity High High
LowPress < > or < > 
buttons to toggle between 
High and Low.
Press  to save the 
selection.
RTS Polarity High High
LowPress < > or < > 
buttons to toggle between 
High and Low.
Press  to save the 
selection.
Robust XON Off Off
OnPress < > or <...

B6500 User’s Guide> 73
USB Menu
The USB Menu provides access to the USB settings. Use the 
following procedure to enter the USB menu:
1.Press the MENU button on the control panel.
2.Press the < > NEXT button until the text “USB Menu” is 
shown on the first line of the display.
3.Press the < > button to enter the USB menu.
4.Press the 
 or  buttons to move through the 
submenus.
5.Press the < > button to enter the submenu.
Use the procedures in the following table to access and change the 
USB Menu...

B6500 User’s Guide> 74
Network Menu
The Network Menu provides access to the printer network settings. 
Use the following procedure to enter the network menu:
1.Press the MENU button on the control panel.
2.Press the < > button until the text “Network Menu” is 
shown on the first line of the display.
3.Press the < > button to enter the Network menu.
4.Press the 
 or  buttons to move through the 
submenus.
5.Press the < > button to enter the submenu.
Use the procedures in the following table to access and...

B6500 User’s Guide> 75 IP Address (user-specified) (user-specified) The first set of numbers 
blinks
Press < > or < > to 
scroll to the desired number. 
Press < > to save the 
current set of numbers and 
move to the next set.
Repeat the procedure for 
each set of numbers. 
When the last set of 
numbers is set, press 
 to save the IP 
address.
Subnet Mask (user-specified) (user-specified) The first set of numbers 
blinks
Press < > or < > to 
scroll to the desired number. 
Press < > to save the 
current...

B6500 User’s Guide> 76 We b En a b l ed En a b l ed
DisabledPress < > or < > 
buttons to toggle between 
Enable and Disable.
Press  to save the 
selection.
SNMP Enabled Enabled
DisabledPress < > or < > 
buttons to toggle between 
Enable and Disable.
Press  to save the 
selection.
Hub Link 
SettingAuto Negotiate Auto Negotiate
10 Base-T Full
10 Base-T Half
100 Base-T Full
100 Base-T HalfPress < > or < > 
buttons to scroll through the 
selections. 
Press  to save the 
selection.
PS Protocol ASCII ASCII...

B6500 User’s Guide> 77
Sys Adjust Menu
The Sys Adjust Menu provides access to the tray adjustment 
settings. Use the following procedure to enter the Sys Adjust menu:
1.Press the MENU button on the control panel.
2.Press the < > button until the text “Sys Adjust Menu” is 
shown on the first line of the display.
3.Press the < > button to enter the Sys Adjust menu.
4.Press the 
 or  button to move through the submenus.
5.Press the < > button to enter the submenu.
Use the procedures in the following table...

B6500 User’s Guide> 78 Tr a y 2  Y  A d j u s t
This submenu 
fine adjusts the 
registration in 
the Y axis.80 to 15
Press < > (increase 
number) to move the image 
to the down or press < > 
(decrease number) to move 
the image to the up.
Press  to save the 
selection.
Tr a y 3  X  A d j u s t
This submenu 
fine adjusts the 
registration in 
the X axis.80 to 15
Press < > (increase 
number) to move the image 
to the right or press < > 
(decrease number) to move 
the image to the left.
Press  to save the...

B6500 User’s Guide> 79 Duplex X Adjust
This submenu 
fine adjusts the 
registration in 
the X axis.80 to 15
Press < > (increase 
number) to move the image 
to the right or press < > 
(decrease number) to move 
the image to the left.
Press  to save the 
selection.
Duplex Y Adjust
This submenu 
fine adjusts the 
registration in 
the Y axis.80 to 15
Press < > (increase 
number) to move the image 
to the down or press < > 
(decrease number) to move 
the image to the up.
Press  to save the 
selection.
Auto...

B6500 User’s Guide> 80 PCL Tray3 ID#
PCL escape 
sequence 
parameter 
value.0005 0000 to 9999
Press < > or < > 
buttons to increase or 
decrease the digit in the 
selected position.
Press the < > to select the 
digit and move to the next 
position
Press  after 
changing the last digit to 
save this setting.
PCL Tray4 ID#
PCL escape 
sequence 
parameter 
value.0006 0000 to 9999
Press < > or < > 
buttons to increase or 
decrease the digit in the 
selected position.
Press the < > to select the 
digit and...