Home > Oki > Printer > OKI B6500 User Manual

OKI B6500 User Manual

Here you can view all the pages of manual OKI B6500 User Manual. The Oki manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 21

B6500 User’s Guide> 21
•Transparencies with white frames or full-color transparencies 
cannot be used.
The way to load transparencies in the paper tray is the same as the 
way to load standard size paper. For details, refer to “ Loading 
Paper” (P. 40).
You must also set paper type for the paper tray to [Transparency] 
on the control panel.
Refer to “ Setting Paper Types” (P. 44) to change the setting.
Printing on Transparencies
To print on transparencies, click on [Properties] from the [File] 
[Print]...

Page 22

B6500 User’s Guide> 22
Printing on Custom Size Paper/Long Paper
This section explains how to print on custom size paper such as long 
paper.
The paper sizes that can be set on this printer are as follows:
Loading Custom Size Paper
The way to load custom size paper with the long edge shorter than 
356 mm in trays 1 to 4 is the same as loading standard size paper. 
For details, refer to “ Loading Paper” (P. 40).
To load long paper in tray 1, follow the 
procedure below:
1.Pull the paper tray out to its...

Page 23

B6500 User’s Guide> 23
2.Load the paper with the side to be 
printed facing up. Curl up the back 
end of the paper so that it will not fall 
from the tray.
3.Push the paper tray completely into 
the printer.
Setting Custom Paper Sizes
Before printing, set the custom size on the printer driver.
You have to configure the settings on the control panel too when 
loading custom size paper in trays 1 to 4 for printing. For details on 
setting the control panel, refer to “ Setting Custom Paper Sizes” 
(P. 43)....

Page 24

B6500 User’s Guide> 24
D.Click on the unit of measure radio button for the units 
you would like to use (mm for millimeters or inch for 
inches.)
E.In the width field, enter the width of the custom size 
paper.
F.In the length field, enter the length of the custom size 
paper.
G.Click add to store the new custom size.
H.Click OK to close the Dialog Box.
NOTE
You may use the modify selection to change a previously stored 
custom size.
NOTE
You may use the Delete Selection to delete a previously stored...

Page 25

B6500 User’s Guide> 25
Print Confidential Document - Secure Print 
When the optional hard disk or compact flash has been installed, you 
can use the secure print feature. 
Important:
•The hard disk may be damaged and erase important data 
saved in the hard disk. We recommend you back up your 
data.
About Secure Print
Secure Print is a feature that allows you to attach a password to a 
print job on the computer, send it to the printer for temporary 
storage, and then print the job from the printer control...

Page 26

B6500 User’s Guide> 26
Configuring Secure Print
The procedure to configure Secure Print is as follows. 
At the Computer
This section explains the procedure using WordPad on Windows XP 
as an example. The procedure is the same for other OSs.
NOTE
>The way to display the printer properties dialog box differs 
according to the application software. Refer to the manual 
of your respective application software.
1.From the [File] menu, select [Print].
2.Select this printer as the printer to be used and click...

Page 27

B6500 User’s Guide> 27
3.Press the < > or < > button until the desired digit of the 
Password (PIN number) is displayed, then press the < > 
button.
4.Repeat step 3 until all four digits of the password are 
displayed.
5.Press the  button.
6.Press the < > or < > button until the desired document is 
displayed and then press the < > button.
7.Input the number of copies desired, then press .
8.After printing, the job is deleted.
9.Press [Cancel] to exit the menu.
Proof Print - Print After Checking Printing...

Page 28

B6500 User’s Guide> 28
Configuring Proof Print
The procedure to configure Proof Print is as follows.
At the Computer
This section explains the procedure using WordPad on Windows XP 
as an example. 
NOTE
>The way to display the printer properties dialog box differs 
according to the application software. Refer to the manual 
of your respective application software.
1.From the [File] menu, select [Print].
2.Select this printer from the drop down list and click 
[Properties]. 
NOTE
>[Copies] must be set to...

Page 29

B6500 User’s Guide> 29
7.Click [OK].
8.Click [Print] in the [Print] dialog box to start printing.
At the Control Panel
This section explains the procedure to print and delete data stored 
in the printer by Proof Print.
Refer to:
“Print Jobs Menu” on page 51
1.Press the  button.
2.Press the < > or < > button until [Print Jobs Menu] is 
displayed and then press the < > button.
3.Press the < > or < > button until the desired digit of the 
Password (PIN number) is displayed, then press the < > 
button....

Page 30

B6500 User’s Guide> 30
•We recommend you back up your data. 
Registering Timed Job
The procedure to configure Delayed Print is as follows.
This section explains the procedure using WordPad on Windows XP 
as an example. The procedure is the same for other OS.
1.From the [File] menu, select [Print].
2.Select this printer as the printer to be used and click 
[Preferences]. 
3.From [Job Type] on the [Job Options] tab, select [Timed 
Jobs]. 
4.Set the time to start printing by selecting [Elapse time] or...
Start reading OKI B6500 User Manual

Related Manuals for OKI B6500 User Manual

All Oki manuals