OKI B4545 User Manual

Maintenance
142
Code 50 - Server error
Check the number of the parametred SMS or an error occured when data 
were configured.
Printer errors
Error messages
If the printer has one of the problems described below, the signal On 
flashes red, and you can’t use your terminal temporarily. The 
corresponding message is displayed on the screen.
Message Action
CHANGE TONER
 TO CONFIRMReplace the toner cartridge.
Proceed as indicated Replacing the toner 
cartridge, page -125.
CHANGE DRUM
 TO CONFIRMReplace the...

143 Maintenance
PAPER JAM 
EXTERNAL TRAYOpen the cover.
Remove the jammed sheet from the print outlet.
PAPER JAM 
INTERNAL TRAYOpen the cover.
Remove the jammed sheet from between the 
tray and the fusing unit.
PRINTER ERROR XXDisconnect and reconnect the terminal.
If the problem persists, contact your supplier.
PAPER SIZE ERRORCheck paper size (A4 / LETTER / ...).
PAPER JAM
UPPER RV MODULEPaper jam in top part of duplex module. Open 
the top access door of the module and remove 
the jammed sheet.
PAPER...

Maintenance
144
Printer paper jam
Inside the printer
+Use the following procedure to remove any sheets of paper jammed inside 
the printer.
Caution - The fusing unit inside the printer can become very hot during 
operation. To avoid injury - do not touch.
+Open the front cover of the printer.
+Remove the toner/drum cartridge set from inside the printer.
+Remove any jammed sheets.
+Open the rear cover of the printer until locked behind lug A.
+Remove any jammed sheets.
+Reinstall the drum/toner cartridge...

145 Maintenance
Paper jam at the feeders and trays
The figures below show different types of paper jams you might 
experience when using your terminal.
+Remove any stuck sheets as shown by the arrow depending on where the 
paper jam occurs.
At the printer output stacker
At the paper tray At the manual feed tray
      
Downloaded From ManualsPrinter.com Manuals 

Maintenance
146
Second cassette (option)
2
1
1
2
Downloaded From ManualsPrinter.com Manuals 

147 Maintenance
Scanner incidents
Scanner paper jam
When a paper jam occurs, the following message appears on the control 
panel screen 
REMOVE DOCUMENT. 
If jams often occur in a specific part of the unit, the latter needs to be 
checked, cleaned or repaired.
+Open the scanner cover. 
+Remove the jammed paper (A) without tearing it.
+Then, close the scanner cover.
A
Downloaded From ManualsPrinter.com Manuals 

Maintenance
148
Miscellaneous incidents
At switch-on nothing appears on screen
Check that the power cable is plugged in, and check the power plug if 
necessary.
The fax does not detect the presence of your inserted document. The 
message 
READY  does not appear on the screen.
At the start and during scanning, REMOVE DOCUMENT appears on the 
screen.
Remove the document or press key  .
Check the thickness of the document (50 sheets of paper of 80 g/m
2).
Iron out the sheets if needed.
Help the sheets...

149 Maintenance
Terminal packing and transportation
Always use the original package when transporting the terminal. Failure 
to do so could void the warranty.
+1 - Disconnect the terminal from the telephone network (depends on model) 
and the mains plug.
+2 - Remove the connection lead to the telephone line (depends on model) and 
the mains lead, the document feeder tray, the printer output tray and the 
paper tray; pack in the original boxes.
+3 - Put the terminal in a plastic bag and put it in its...

Maintenance
150
Characteristics
Device type: Office color fax machine, fast operation with all Group 3 
devices according to ITU-T recommendations.
Unit characteristics
Dimensions:Width: 440 mm [17.32 in.]
Depth: 460 mm (without duplex option) [18 in.]
Height: 460 mm (without stackers and 500 
sheets paper feed tray) [18 in.]
Weight:14 kg [31 lbs.]
Electric power supply:100-120 V - 50-60 Hz 
Power consumption (max. values):- standby mode: less than 15 W
- wait mode: less than 75 W
- operation: 580 W...

151 Maintenance
File format: - Image : TIFF-F for black/white documents and 
JPEG for color documents
- PDF : monochrome et color
- PCL
® 6 Emulation (A)
SG Script (PostScript® level 2 language 
emulation and PostScript® level 3 language 
emulation with configuration file)(
B)
Specifications may change for improvement without prior notice.
A. PCL is a registered trademark by Hewlett Packard.
B. PostScript is a registered trademark by Adobe Systems Incorporated.
Downloaded From ManualsPrinter.com Manuals