Oce PlotWave 300 User Manual

Print a demo print
When to do
You can print a demo print to check if the Océ PlotWave 300 works correctly.
How to print a demo print
1.From the 'HOME' screen on the user panel select the 'System' tab.
2.Select the 'Setup' tab.
3.Use the scroll wheel to select 'Test prints' and confirm with the confirmation button
(above the scroll wheel).
4.Use the scroll wheel to select 'Demo print'.
5.Use the lower right soft key or press the green button to start printing....

Print a test print
When to do
Print a test print from roll 1 or from roll 2 at the request of the Océ Helpdesk. The test
print can provide information to solve quality problems.
How to print a test print
1.From the 'HOME' screen on the user panel select the 'System' tab.
2.Select the 'Setup' tab.
3.Use the scroll wheel to select 'Test prints' and confirm with the confirmation button
(above the scroll wheel).
4.Use the scroll wheel to select 'Test print from roll 1'...

Adjust the print density
When to do
To influence the toner usage of your Océ PlotWave 300 you can print the print density
chart and adjust the print density offset. A negative value reduces the toner usage, a positive
value increases the toner usage.
How to adjust the print density
1.From the 'HOME' screen on the user panel select the 'System' tab.
2.Select the 'Setup' tab.
3.Use the scroll wheel to select 'Print density' and confirm with the confirmation button
(above the...

Chapter 7 - Solve problems
284
Adjust the print density
Downloaded From ManualsPrinter.com Manuals 

Chapter 8
License management
Downloaded From ManualsPrinter.com Manuals 

Introduction to managing licenses
Introduction
The Océ applications and options are protected against unauthorized use. You need to
activate the license to enable an application or option for use. The 'Support' - 'Licenses'
tab in the Océ Express WebTools enables you to manage the licenses very easily.
This section describes the following.
■The basic concept of the licenses.
■How to manage the licenses.
Chapter 8 - License management
286
Introduction to managing licenses
Downloaded From...

The 'Licenses' tab in the Océ Express WebTools
Introduction
The 'Support' - 'Licenses' tab has the following possibilities.
Possibilities
■View the current active licenses
■Get the host id of the Océ system
■Save the active licenses
■You can activate new licenses or saved licenses.
Chapter 8 - License management
287
The 'Licenses' tab in the Océ Express WebTools
Downloaded From ManualsPrinter.com Manuals 

The basic workflow of 'Support' - 'Licenses' activation
Introduction
Before you can work with licenses, you must access to the Océ Express WebTools. The
following workflow describes per step when to use which possibility.
The workflow
1.View the current active licenses.
You can make a list of new options you need and make a list of license numbers. Océ
needs the list of new options and the license numbers to create a new license file.
2.Get the host id of the Océ system.
Océ needs the...

Océ License Logic
Introduction
When you navigate to the 'Support' - 'Licenses' tab in the Océ Express WebTools, you
get access to the Océ License Logic application.
Overview Océ License Logic functionality
#
DescriptionFunction
You can make a list of new options you
need and make a list of license numbers.
Océ needs the list of new options and the
license numbers to create a new license
file.
View the current active licenses.
Océ needs the host id of your Océ system
to create a new...

The structure of license files and licenses
Introduction
A license file contains a license per option of your Océ system. You can view the current
active licenses with Océ 'Support' - 'Licenses' tab in the Océ Express WebTools. You can
preview the new active licenses during the license activation job.
A license file contains licenses of the same license-type
A license file you receive from Océ contains only licenses of the same license-type. The
following license types are possible....