Home > Nortel > Communications System > Nortel Modular Ics 6.1 Installer Guide

Nortel Modular Ics 6.1 Installer Guide

Here you can view all the pages of manual Nortel Modular Ics 6.1 Installer Guide. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 641

Glossary / 641
P0603534  02Modular ICS 6.1 Installer Guide
Set filter: See Restriction filter.
Set lock (telephone lock): This 
feature allows you to limit the number 
of features that may be used or 
programmed at a telephone. Full set 
lock allows very few changes or 
features, Partial set lock allows some 
changes and features, and No set lock 
allows any change to be made and any 
feature to be used. Set lock is assigned 
under Capabilities in Terminals and Sets 
programming.
Set relocation: See...

Page 642

642 / Glossary
Modular ICS 6.1 Installer GuideP0603534  02
System coordinator plus 
password:  A one- to six-digit 
password that prevents unauthorized 
access to programming. The System 
coordinator plus password can be 
assigned and changed in Passwords 
programming. 
System coordinator plus 
programming:  A combination of 
common and installer programming 
settings. 
Press ≤ ••Ç؈ÏÈÌ, 
then  
ÍÇ∏ÒËÍ to access 
System coordinator plus programming. 
System coordinator 
programming:  The programming...

Page 643

Glossary / 643
P0603534  02Modular ICS 6.1 Installer Guide
system), and CAP capability by adding 
KIMs.
T7406 telephone: This portable 
handset functions very similarly to the 
T7310 telephone. Functions and 
installation are all described in separate 
documentation specific to the telephone.
T loop:  A type of loop provided by a 
BRI-ST Card. It connects the ICS to an 
ISDN network using an NT1.
Terminal Answering Position 
(TAP) This is the hardware 
combination of a T7316E telephone 
attached to one...

Page 644

644 / Glossary
Modular ICS 6.1 Installer GuideP0603534  02
This feature acts to prevent unnecessary 
tandeming and tromboning of trunks. 
This action occurs after the speech path 
has been established.
Trunk Module: A module that allows 
you to install additional Trunk 
Cartridges in your system to provide up 
to 12 additional trunks.
Trunk route optimization: (TRO) 
This is a private network feature that 
provides routing for forwarded calls 
along the shortest or best route on the 
private network.
U
U...

Page 645

Glossary / 645
P0603534  02Modular ICS 6.1 Installer Guide
Voice Message Centers. You can also 
program which of the five Centers is to 
be accessed by each specific line.
W
Wait for dial tone: ≤°‚›
A feature that causes of sequence of 
numbers to pause until dial tone is 
present on the line before continuing to 
dial. The Wait for dial tone symbol 
(‡) 
uses two of the 24 spaces in a dialing 
sequence. This feature requires a 
Services or Combo Cartridge.
wireless: See Companion. 

Page 646

646 / Glossary
Modular ICS 6.1 Installer GuideP0603534  02 

Page 647

P0603534  02Modular ICS 6.1 Installer Guide
Index
Symbols
≤
**79743 (System ID)
 309
**CONFIG (≤**266344) 322
**DIALPAD (≤**3425723) 316
**LINE
 310
**PROFILE (≤**7763453) 315
**SET (set programming) 310
**STARTUP (≤**7827887)
 317
**SYSID 309
**SYSID (≤**79743) 480
**TIME (≤**8463)
 408
*7, Contrast Adjustment 577
1, message reply enh 428
811 Call Display
 348
819 ONN blocking 456
Numerics
0X32
using old modules
 210
1st display, programming 349
25-pair connector 235
2-way DID, PRI dialing plan
 115...

Page 648

648 / Index
Modular ICS 6.1 Installer GuideP0603534  02
Alarm 68-Z 536, 540
Alarm 75
 540
Alarm 76-X 536, 540
alarm messages
programming alarm set
 427
alarm set
programming
 427
alarm telephone
 228
alarms
hospitality
 465
Hospitality services
 218
allow last number redial 345
allow redirect 336
allow saved number redial
 345
alpha tagging
CLID match
 432
alternate call ringing
 371
analog
message reply enh
 428
name and number blocking
 456
trunk data settings 352
trunk type 353
analog access lines...

Page 649

Index / 649
P0603534  02Modular ICS 6.1 Installer Guide
assigned, BRI DNs 503
ATA
accessing external lines
 443
for OPX applications 282
optional equipment list
settings
 336
troubleshooting 591
attn attempts
 465
Attn duration 465
auto associate, SWCA 430
auto attendant, bypassing
auto DN
access codes
 82
conflicts
 357, 385, 444
DID trunk 91
PRI trunk 91
private network auto-answer
 91
programming 444
rec’d number length 444
received number length
 450
auto number identification, see ANI
auto privacy...

Page 650

650 / Index
Modular ICS 6.1 Installer GuideP0603534  02
BLF, M7310 only
bracket
 225
break-in, MCDN 154
BRI
answer mode
 359
assign DNs 503
assign lines/loops 326
assigning SPIDs to T and NT loops
 499
becoming a clock source 505
BRI-ST cartridge wiring
 278
BRI-U wiring 264, 266
call type 500
card
 54–60, 498–503
card programming 498
cards 261
clock source loops, power up or 
down
 505
DNs on loop 503
D-packet service
 501
handling calls 71
internet connection 76
lines on T/NT loop
 498
lines pooled 71...
Start reading Nortel Modular Ics 6.1 Installer Guide

Related Manuals for Nortel Modular Ics 6.1 Installer Guide

All Nortel manuals