Nortel Modular Ics 6.0 Installer Guide

Private networking using PRI SL-1 / 151
P0992638 03Modular ICS 6. 0 Installer Guide
Assigning PNIs for adjacent nodes
1. After you enter your password, press ‘ until the 
prompt displays Hardware: 
2. Press ≠. The prompt displays Show module.
3. Enter the module where the PRI card you have configured 
for SL-1 resides.
4. Press ≠. The prompt displays CdX-KSU.
5. Press ≠. The prompt displays Card type.
6. Press ‘. The prompt displays Lines.
7. Enter the line number you want to configure.
8. Press ≠. The...

152 / Private networking using PRI SL-1
Modular ICS 6.0 Installer GuideP0992638 03
4. Press ≠. The prompt displays Line assignment.
5. Enter the target line number for the Auto Attendant 
system.
6. Press CHANGE
 to change the setting for each line to one of 
the following: Unassigned, Ring only, Appr&Ring, and 
Appr only. 
7. Press – until you reach the top level, then press 
‘. The prompt displays Lines.
8. Press ≠. The prompt displays Show line.
9. Enter the target line number you entered in step 5....

Private networking using PRI SL-1 / 153
P0992638 03Modular ICS 6. 0 Installer Guide
6. Press ‘. The prompt displays Tel #:.
7. Enter the number to access the external Auto Attendant 
system.
Set Telco features for the CAA DN
1. Press – until you reach the top level, then press 
‘ until the prompt displays Terminals&Sets.
2. Press ≠. The prompt displays: Show set: 
3. Enter the DN for the Auto Attendant system.
4. Press ≠. The prompt displays Line access.
5. Press ‘ until the prompt displays Telco...

154 / Private networking using PRI SL-1
Modular ICS 6.0 Installer GuideP0992638 03
5. Press ‘ until the prompt displays Telco 
features.
6. Press ≠. The prompt displays VMsg Center 1.
7. Press ≠. The prompt displays Use:.
8. Press CHANGE
 to until you reach Routing tbl. 
9. Press ‘. The prompt displays Tel #:.
10. Enter the number to access the external Auto Attendant 
system.
11. Exit programming.
Voice mail configuration
On the voice mail system, set the following parameters:
Set Redirected DN to...

Customer Use / 155
P0992638 03Modular ICS 6. 0 Installer Guide
Customer Use
This section shows sample configurations for different types 
of network access. Each example has four parts:
A scenario explains the goal of the call and what is 
required to achieve it.
A diagram shows the network configuration that supports 
the application.
A list shows the Norstar hardware required to support the 
configuration.
Tables show the programming. Only those settings that are 
important to network access are...

156 / Customer Use
Modular ICS 6.0 Installer GuideP0992638 03
Hardware: ICS, a Trunk Module with a DID Trunk Cartridge, 
or a DTI with lines programmed as DID. 
Call Norstar and select tie lines to a private network
A manager in Georgia wants to use the tie lines at headquarters 
to call Washington. He dials a telephone number that maps 
onto the DISA DN, enters a Class of Service (COS) password, 
then dials a line pool access code to select a tie line to 
Washington. 
Using tie lines
Hardware: ICS, a...

Customer Use / 157
P0992638 03Modular ICS 6. 0 Installer Guide
Call Norstar and select lines to the public network
Gord wants to make a long-distance business call from home. 
To avoid being charged, he dials the telephone number that 
maps onto the Auto DN at work. After hearing the dial tone, 
Gord dials a line pool access code to select a line to the public 
network. He then dials the long-distance number. 
Using DID to dial long-distance
Recd # lengthRecd # lengthfour digits (three to seven digits,...

158 / Customer Use
Modular ICS 6.0 Installer GuideP0992638 03
Hardware: ICS, a Trunk Module with a DID Trunk Cartridge 
or DTI with several DID lines. 
HeadingParameterSetting 
Incoming trunk:
Trk/Line Data
Line 049DID
Access codes Auto DN4321
Recd # lengthRecd # lengthfour digits 
(can be from three to seven 
digits, but must match number of 
digits sent by central office)
Lines /Restrictions 
and Remote 
accessDefine restriction filters. Define 
remote access packages. Assign 
a remote restriction and...

Customer Use / 159
P0992638 03Modular ICS 6. 0 Installer Guide
Private network
All the calls described in this section originate from within the 
networked system.
Call one or more Norstar telephones
The production supervisor in Houston selects the less-
expensive company Tie line to call the manager at the 
Administration office in Dallas. Once the line is selected, the 
production supervisor dials the digits that will map onto the 
target line of the manager in Dallas.
Calling from a Norstar to a...

160 / Customer Use
Modular ICS 6.0 Installer GuideP0992638 03
Use tie lines to other nodes in the private network
At a branch office, Joan selects a tie line to the main office. 
After hearing the dial tone, she dials a line pool access code to 
select another tie line to a branch office in the next state.
Calling within the network through Tie lines
Hardware: ICS, a Trunk Module with two E&M/DISA Trunk 
Cartridges, for the three lines in the line pool and the one 
incoming line, or a DTI with four E&M...