Nortel Modular Ics 5.0 System Coordinator Guide

General System features /221
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Substitutes for display buttons
(

 

	 

    	  	  		  

 

	
Prime line

 
 	  	
  
 	 	
 
!	
 
  	 
 
 			

   
 
  
     

Private lines
( 	 
  !
  		
	 
 6	

 	
	   
  
 	
  		 
 ...

222/ General System features
Modular ICS 5.0 System Coordinator Guide P0941565 02 

P0941565 02 Modular ICS 5.0 System Coordinator Guide
Troubleshooting
Using the alarm telephone
( 	
	 
 

	 :

	 :-61  	
	

 
   (
	 
 	 	

  . 1 	
   



	 	 	 	

 	
   	

 
  	
	 

Reporting and recording alarm codes
- 	 	
	 			   	
	 
 

	+
$ /
  	 
	  
= *
TIME	
 
   
...

224/ Troubleshooting
Modular ICS 5.0 System Coordinator Guide P0941565 02
Testing the telephone
-       	  	
 

	    	  
 	
	 
	 
 	      	   
  
Testing the telephone display
? 	 

	     	   
	 
 
   
$ *
²¡âÞ  

		
Display test
= *
TEST³  		
  	 

	 
3 (
...

Troubleshooting /225
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Testing the telephone buttons
$ *
²¡âÞ£NEXT
= *
TEST³  		
   	  
3 *        -  

 	 
	        
9 * 
¨ Rls button  

	

 	
   Button test

	
Testing the speaker in the telephone handset
 	
    		
	
   	 	 	
 
...

226/ Troubleshooting
Modular ICS 5.0 System Coordinator Guide P0941565 02
Testing the telephone speaker
$ *
²¡âÞ£NEXT
  

	 	

Speaker test
= *
TEST³  		
  	 	 
( 	  
   
 	 	 
	! 
  
   
   
  
3 *  	  
  
Testing the power supply to a telephone
$ *
²¡âÞ£NEXT
  

	 	

Power test
= *...

P0941565 02 Modular ICS 5.0 System Coordinator Guide
Common feature displays

 	   

 

	    	 	
Someone is already using programming,
or the feature you are trying to use is not
compatible with the configuration of the
telephone or line.
You have tried to use a feature, but you
have not been given access to it in
administration programming.
You have taken more than 15 seconds to
press a button in response to a display.
You have entered a feature code that is
used...

228/ Common feature displays
Modular ICS 5.0 System Coordinator Guide P0941565 02
You are receiving a call from telephone
221.
You have received a Ring Again offer for a
call to an internal telephone. Press the
flashing internal line button or
YESto call
the number again. On the M7100 or T7100
set, just lift the receiver. Otherwise, press
NOor wait 30 seconds for the Ring Again
offer to expire. For an explanation of Ring
Again, see
Using Ring Againo n page 72 .
The person to whom you camped the call
did...

Common feature displays /229
P0941565 02 Modular ICS 5.0 System Coordinator Guide
You have used the Call Queuing feature
without picking up the receiver. Auto
Handsfree has not been assigned to your
telephone. You must use the receiver or
Âto answer a call.
You are receiving a priority call. If you are
on another call, inform the person you are
speaking to that you are about to put the
call on hold. Press the flashing line
indicator of the priority call or wait until the
call connects automatically...

230/ Common feature displays
Modular ICS 5.0 System Coordinator Guide P0941565 02
You have tried to make, receive or pick up
a call when no line button was available.
Some features require you to have a
button free. Releasing calls can free up line
buttons.
The feature you tried to use requires you to
be on an active call at your telephone. This
display appears when informationabout a
call has been cleared by a system reset.
All the lines or line poolsavailable to the
telephone are in use. This display...