Nokia 6360 User Guide

							5
[ 32 ] ERASE MISTAKES
If you make a mistake:
• Press   to erase one character to the left. 
•Press and hold 
Clear to erase all text.
CHANGE LETTER CASE
• To change cases (upper, lower, predictive, sentence), press  .
The   icon switches to  , showing you are using lowercase 
letters.
• Press and hold a key until the key’s number appears on the screen, or 
press and hold   to switch to numbers.
Use special characters in names and phone numbers
Your phone has specials characters, symbols and punctuation that are 
available when writing text. Here is a sample of what you will find: 
IN ABC
1Press . 
2A screen appears with the available symbols. 
3Use   and   to move to the 
character you want, then select 
Insert. 
Note: For faster scrolling when viewing
special characters, you can use the 
(up),   (down),   (left) and   (right) keys. .?!@‘ -_ (
), : ;&
/~
\%* # +
“£$¥ § ¡ ¿
$ 
						

							[ 33 ]Add information
5
IN 123
The   key inserts the following characters when you are prompted to 
enter a phone number. Press   until the character you want appears:
*This character sends command strings to 
the network. Contact your service provider 
for details.
pThis character creates a pause that occurs 
when the phone dials a number. Numbers 
entered to the right of this special character 
are automatically sent as touch tones 
after a 2.5-second pause.
wThis character causes the phone to wait for you to press 
Send. 
 • WRITE WITH PREDICTIVE TEXT
When you’re writing text messages on your 
phone, you can use the 
predictive text method 
of entering information. With predictive text, 
you need to press each number key only once 
for each letter. The phone predicts, or guesses, 
what you’re writing.
The word shown on the screen changes after 
each keystroke (as shown in the example that follows). Since it’s easy to 
get confused, you should try to disregard the word you’re writing until you 
have entered all the characters.
Example: To write 
Nokia with the English dictionary selected:
What you press What you see
Press 
o
Press 
on
Press 
onl
Press 
onli
Press 
Nokia 
						

							5
[ 34 ] Keys for predictive text
KeyPurpose
Keys with 
lettersUse for word entry. Press each key only once for each 
letter.
Press to view the next matching word if the underlined 
word is not the word you intended. To change the 
underlined word, press   repeatedly until the word 
you want appears. Also, press and hold this key for a list 
of symbols.
SpellIf the dictionary sees a word it doesn’t recognize, you 
see 
Spell above the left selection key. Select 
Spell, 
enter the word you want to enter, and press 
Save.
Press once to accept a word and add a space.
Press and hold to enter a number. You see the   icon 
on the screen. Press and hold   again to write text 
letters.
ClearPress once to delete the character to the left of the 
cursor.
Press repeatedly to add various punctuation marks.
Press once quickly to switch the character case.  
indicates uppercase.   indicates lowercase.
160The maximum number of characters available. The 
character counter appears in the top right corner of the 
screen and counts down for each character you add. 
						

							[ 35 ]Add information
5
Turn on predictive text input
1Press 
Menu, and then press 
Select.
2When 
Write message appears, press 
Select.
3Enter a character using the keypad.
4Press 
Options, scroll to 
Predictive text and press 
Select.
5Scroll to the dictionary you want (for example, 
English).
6Press 
Select.
T9 prediction on appears. (
T9 is the technical name for Predictive 
text input.) This means you can use the predictive text method to 
enter messages. In the text message window where you write, the 
predictive text icon   appears. Predictive text can be turned on 
and off by pressing   twice.
Turn off predictive text input
1Repeat steps 1 through 5 in the section immediately above. 
2Scroll to 
Prediction off and press 
OK.
Tips for predictive text
QUICK ACTIVATION OR DEACTIVATION OF PREDICTIVE TEXT
To quickly activate or deactivate T9 while writing a message, press and 
hold 
Options selection
 key, or press   twice. 
ADD A SYMBOL
1Press and hold  .
The symbol screen appears, showing the list of special characters. 
For more information on special characters see “Enter spaces and 
punctuation” on page 31.
2Scroll to the symbol you want and select 
Insert.
CHECK A WORD
When you’ve finished writing, make sure the underlined word is the word 
you intended to write. 
						

							5
[ 36 ] If the word is correct:
• Insert a punctuation mark, if needed.
• Press   to confirm the change and enter a space.
• Start writing the next word.
If the word is not correct:
• Press   repeatedly until the word you want appears, and 
then press   to confirm it.
OR
•Press 
Options, scroll to 
Matches, and then press 
Select. Scroll to 
the correct word and press 
Use. 
• Start writing the next word.
When you enter a period to end a sentence, the phone switches to 
 so that the first letter in the next word will be uppercase 
(a capital letter).
ADD A WORD TO THE DICTIONARY
If the word
 Options changes to
 Spell, the word you intended to write is 
not in the dictionary. You can add the word to the dictionary.
1Select 
Spell and enter the word(s) using standard text entry.
2Select 
Save to save the word(s).
INSERT NUMBERS
1To add a number to the message, press and hold   until   
appears on the screen. 
2Enter the numbers you want, and then press and hold   to return 
to the   method.
Tip: You can also press and hold any number key while writing 
a message. This will cause the number on the key to appear in 
the text. 
						

							[ 37 ]Add information
5
INSERT SYMBOLS
1To put a symbol in the message, press 
Options and scroll to 
Insert 
symbol (or press   and scroll to the symbol you want). 
2Select the symbol you want (use the scroll keys to move through the 
symbols) and press 
Insert.
WRITE COMPOUND WORDS
1Write the first part of the word and press   to accept that part.
2Write the last part of the compound word and press   to enter. 
						

							6
[ 38 ]
6 Use the phone book
Your phone includes a phone book that can 
store up to 500 entries (names and associated 
phone numbers). In addition, the phone book 
can store up to five numbers, two addresses 
(postal or e-mail) and one text entry, such as a 
note, per entry.
• An entry in the phone book can consist of 
a number only, or a name and a number.
• You cannot enter the same name twice. If 
you try to save a name that is already in the phone book, the phone 
asks if you want to add the number to an existing name.
 • OPEN THE PHONE BOOK
There is more than one way to view the names in your phone book:
•Press 
Names, select 
Find, enter the name, and then press 
Find. 
•Press 
Names, select 
Find, press list, and then scroll through the 
names.
• At the Start screen, use   and   to scroll through the names. 
 • SAVE NAMES AND NUMBERS
You have several options for saving names and numbers. 
Quickly save a number and name
1Enter the phone number using the keypad. 
2Press 
Options, and then press 
Save. 
3Enter a name and press 
OK.
4Press 
Done to return to the Start screen.
Phone book 
						

							[ 39 ]Use the phone book
6
Save an entry using the names menu
1Press 
Names to enter the phone book.
2Scroll to 
Add entry and press 
Select. 
3Enter a name and press 
OK.
4Enter a number and press 
OK.
5Press 
Done to return to the Start screen.
 • SAVE A TEXT ENTRY WITH A NAME
Once you have added a contact to your phone book, you can add an 
e-mail address, a mailing address, or a note to that contact.
Note: Text entries can only be added to existing contacts. 
For instance, you cannot enter an e-mail address until you 
have selected a name to add the address to.   
1Find the name or number to which you want to add text. 
2Press 
Details, and then press 
Options.
3Scroll to 
Add text, press 
Select, then scroll to the text type you would 
like to add (
E-mail, 
Street addr., or 
Note).
4Press 
Select, add your text, and press 
OK. 
5Press   to return to the Start screen. 
 • RETRIEVE INFORMATION
You can retrieve numbers from the phone book several different ways.
Retrieve numbers from the phone book 
1At the Start screen, press 
Names.
2Select 
Find and enter the desired name. 
3Press 
Find, and then press   to call the number. 
						

							6
[ 40 ]
Retrieve information with shortcuts
You may want to use some of these shortcuts, or alternate methods for 
retrieving a number.
•Press 
Names, enter the first letter of the name, scroll to the name, and 
press .
• At the Start screen, press the scroll keys to immediately enter your list 
of names, scroll to the name you want, and press  . 
• Press   to access a list of your last ten dialed calls, scroll to the 
one you want to dial, and press   again. 
 • USE PHONE BOOK MENUS
The phone book has several menus from which you can choose. These 
menus appear when you press 
Names. Use the scroll keys to move to the 
menu you want to use. 
FindSearch for a specific entry.
Add entryAdd a new contact to your phone book.
Edit nameEdit an existing contact.
EraseErase names and numbers one by one or all at 
once.
Add numberAdd a contact to the phone book.
SettingsView a new menu list which includes the phone 
book’s memory status and scrolling view. 
1-touch dialingAssign up to eight keys for speed dialing. 
Voi ce t ag s“Tag” a phonebook listing with a voice signal so 
you can call by speaking the signal into your 
phone. 
						

							[ 41 ]Use the phone book
6
Change phone book views
You can view your phone book in three different ways:
In all views, you can use the scroll keys to move up and down through the 
list of names. 
To change the way you view names and numbers in your phone book:
1Press 
Names.
2Select 
Settings.
3Select 
Phone book view. 
4Scroll to the view you want and press 
OK.
Caller groupsCaller enables you to identify callers by the 
ringing tone or graphic that you’ve assigned to 
their group. A group can be as small as one 
person or as large as your entire Phone book. 
You can define the ringing tone and graphic for 
up to five pre-defined groups in your Phone 
book.
Name listShows all the names that are stored in your 
phone book. Three names appear on the screen 
at a time. 
Name onlyDisplays individual names only. You can view 
the corresponding phone number by pressing 
Details and then scrolling up or down. 
Name+numberShows individual names and numbers. Only one 
name and its corresponding phone number 
appears on the screen at a time.