Home > Nitsuko > Communications System > Nitsuko Digital System Phone Program Record Form Manual

Nitsuko Digital System Phone Program Record Form Manual

Here you can view all the pages of manual Nitsuko Digital System Phone Program Record Form Manual. The Nitsuko manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 41

Program 18 - Extension Features (Part I) (contd)
Extension DND (Do Not Disturb)
 COS (Class of Service)
 RG
 (Ring Group)
 CPG
 (Call Pickup Group)
 PRG
 (Privacy Release Group)
 OHR (Off-Hook Ring)
 BLF (DSS/BLF Lamps)
 LDU (Line Dial-Up)
 PZ
 (Page Zone Member)
 SO
(Station Operator)
 SDB
 (Speed Dial Block)
 VX (Voice Mail)
 DS (Data set)
 DB (Door Box) - Alert 1
 DB (Door Box) - Alert 2
 DB (Door Box) - Alert 3
 DB (Door Box) - Alert 4
362
363
364
365
366
367
368
369
370
371
To enter Program 18 (Part...

Page 42

Program 18 - Extension Features (Part II)
Before you fill in data, either use the Copy and Paste commands to make additional copies of the blank
Extension Feature forms for each installed extension or print copies of the blank forms as needed.
Extension:Feature Y/N
 HS (Headset)
 VA (Voice-Announce Calls)
 VP (Voice Page Thru Spkr)
 VO (Whisper Page)
 RLP (Ringing Line Pref.)
Feature
 Line # ________
 Line # ________
 Line # ________
 Line # ________
 Line # ________
 Line # ________
 Line # ________...

Page 43

Program 18, Part II (contd)
Direct Station Selection (and Call Coverage) and Hotline Layout
Keys 1-15 are Direct Station Selection keys. The Call Coverage and Hotline keys can be anywhere, depending on how
they are assigned in Program 17. You can use the DSS procedure below to change the extension associated with
a DSS or Call Coverage key.
Keyset Phone
(Dial pad located here)
HOLD CONF MIC/DND ICM MSG HF
To enter Program 18 data for HS, VA, VP, VO, RLP: 
1. Enter the program mode.
# + dial 775312 + #....

Page 44

Program 18, Part II (contd)
To enter Program 18 data for RA, NR, DRA, PLA:
1. Enter program mode.
# + dial 775312 + #.
2. Press key 18 (CONF).
3. Dial extension + #.
4. Dial feature abbreviation + #.
The Line keys you can program light steadily or flash. Steady means the feature is 
disabled, flashing means it is enabled.
5. Dial a line number.
OR
    Press a Line key.
6. To change or enter data: Dial data (Y)es or (N)o, press #.
7. Repeat steps 5-6 for all lines.
8. Select an option:
- To program...

Page 45

Program 18, Part II (contd)
- To enter a Flash, press MSG, or to enter a Delay, press DIAL. These options are only
  available with software versions AUX Module 02.10/Base 02.00 and higher.
- To enter *: DIAL + press *.
- To enter #: DIAL + press #.
9. Select an option:
- To program more bins: Go to step 5. 
- To program another feature: SAVE + go to step 4 in any Program 18.
- To program another extension: SAVE twice + dial Y + go to step 3.
- To exit Program 18: SAVE three times.
- To enter another...

Page 46

Program 18, Part II (contd)
Form for System Speed Dial
Bin Number System Speed Dial Numbers and Names
Contd next page
Page 37 

Page 47

Program 18, Part II (contd)
To enter Program 18 data for System Speed Dial (SD): 
1. Enter the program mode.
# + dial 775312 + #.
2. Press key 18 (CONF).
3. Dial the number of the extension you are programming from + #.
4. Dial SD + #.
5. Dial bin number + #.
6. If you can store a name: Enter name + #.  Or skip to step 7.
To enter a letter, number, blank:
- Press dial pad button that has desired character. Zero button=blank, Q, Z (in that order).
- Dial digit (1, 2, 3)=letters position on button (e.g.,...

Page 48

Program 19 - Extension Hunt Groups
Before you fill in data, either use the Copy and Paste commands to make additional copies of the blank
Circular/Terminal or UCD/ACD Hunt Group form for each such group you wish to program or print and
copy the forms as needed.
Form for Circular/Terminal Hunt Group
Group Name:
Member 
ExtensionHunt 
TypeMember 
ExtensionHunt 
TypeMember 
ExtensionHunt 
Type
To enter Program 19 data for Circular or Terminal Hunt (types 01, 02, 03): 
1. Enter program mode.
# + dial 775312...

Page 49

To delete a member of a Circular or Terminal group:
1. Enter program mode.
# + dial 775312 + #.
2. Press key 19 (MIC/DND).
3. Dial 01, 02, or 03 (it doesnt matter). 
4. Dial first Member Extension in group + #.
5. Press # until you see the extension you want to delete.
6. If the extension is the last extension in a Terminal hunt group: Dial 300 + #.
OR
    If the extension is in the middle of a group, dial the extension that comes after it + #. 
For example, if the group is 304, 305, 306 and you want to...

Page 50

Program 19 - Extension Hunt Groups (contd)
Form for a UCD/ACD Hunt Group
Before you fill in the data, either use the Cut and Paste commands to make additional copies of the blank
forms for each UCD/ACD group you wish to program or print and copy the forms as needed.
 Hunt
 Type
 Master
 Extension
 Overflow
 Extension
 Supervisor
 Extension
Group Name:
Member 
ExtensionHunt 
TypeMember 
ExtensionHunt 
TypeMember 
ExtensionHunt 
Type
To enter Program 19 data for UCD/ACD Hunt (type 04, 05):
1. Enter program...
Start reading Nitsuko Digital System Phone Program Record Form Manual

Related Manuals for Nitsuko Digital System Phone Program Record Form Manual

All Nitsuko manuals