Nitsuko 124i/384i Software Manual
Here you can view all the pages of manual Nitsuko 124i/384i Software Manual. The Nitsuko manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 71
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Call Forwarding Time and Date FWD-B/NA (ext name)Your extension is idle and you have previously activated Call Forwarding when Busy/Not Answered (Code *22). Name shows destination extension. Time and Date FWD IMME (ext name)Your extension is idle and you have previously activated Call Forwarding Immediate (Service Code *24). Name shows destination extension. Time and Date FWD-RNA (ext name)Your extension...
Page 72
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Call Forwarding with Follow MeSET FOLLOW ME 1:SET 0:CANCELYou dial Service Code *23 to dial Call Forward with Follow Me SET FOLLOW ME ICM DIALYou dial 1 to set Call Forward with Follow Me (after dialing Service Code *23) CANCEL FOLLW ME ICM DIAL 0:ALL CLRYou dial 0 to cancel Call Forward with Follow Me (after dialing Service Code *23) SET FOLLOW ME CANCELYou have canceled Call Forwarding with Follow Me SET...
Page 73
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Caller ID NO MATCHYou search the Caller ID Table for a name or number match and no matches were found TABLE IS FULLYou try to automatically store the Caller ID information for your call and the Caller ID Table is full (trk name) (Incoming Number)You display the Caller ID information for a Single Message Format incoming call before you answer it (Incoming Number) (Incoming Name)You display the Caller ID...
Page 74
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Do Not Disturb Time and Date DND INTERCOMYou press DND and dial 2 to activate DND for Intercom and transferred trunks Time and Date DND ALLYou press DND and dial 3 to activate DND for all calls Time and Date DND TRFYou press DND and dial 4 to activate DND for incoming Call Forwards SET DND You press DND to start DND activation procedure SET DND CANCELYou press DND and dial 0 to cancel Do Not Disturb...
Page 75
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Hold Time and Date HOLD (ext name)You place an Intercom call on Hold, where (ext name) is the name of your Intercom caller (ext name) HLD RCALLAn Intercom call you left on Hold too long recalls your extension, where (ext name) is the call you left on Hold (trk name) HOLD RECALLA call you have left on Hold too long is recalling your extension (trk name) HOLDYou place a call on Hold Intercom Time and...
Page 76
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Memo Dial MEMO DIAL (digits)You press the Memo Dial key to check the Memo Dial entry before dialing it out CHECK LINE KEY (nn) MEMO DIALYou press CHECK and the Memo Dial key MEMO DIAL (digits)You press the Memo Dial key while on hook to check the stored number Message Waiting Time and Date MSG>>> (ext name)You dialed Service Code *0 and left a message at the extension shown in (ext name) Time and Date...
Page 77
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Paging, External Time and Date PAGE EXT ALLYou make an All Call External Page Time and Date PAGE EXT GROUP (nn)You make an External Zone Page, where (nn) is the external zone number Time and Date ZONEYou dial 801 to access an Internal Paging Zone or 803 for an External Paging Zone Paging, Internal Time and Date GROUP CALL (name)You dial 801 and an internal zone number, where (name) is the Internal Paging...
Page 78
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Programmable Function KeysFor this key function . . .You see this display . . . 1021 STEP CALL 1022 DND/FWD OVERRIDE 1023 MESSAGE WAITING 1025 ROOM MONITOR 1026 TRANS MIT CUT OFF 1027 TEXT MESSAGE 1028 CHANGE HEADSET MODE 1029 DATA 1031 BUZZER 1032 BOSS CALL FORWARD 1033 PARK HOLD 00 1034 SERIES OPERATION 1035 SERIES CALL 1036 ICM 1037 ABB COMMON DIAL 1038 ABB GROUP DIAL 1039 SET DAY 1040 SET NIGHT#1...
Page 79
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Programmable Function KeysKEY PROGRAMYou dial Service Code 851 to program your function keys KEY PROGRAM KEY (nn) (function)You press a function key after dialing Service Code 851, where (function) is the currently programmed function CHECKLINE KEY nn (function)You press CHECK and a function key while on hook, where (function) is the stored function Park (trk name) PARK HOLDYou Park a call (before you...
Page 80
Table 1-8 Multibutton Telephone Displays With this feature... You’ll see this display... When... Secretary Call Pickup Time and Date BOSS FWD