Home > Nitsuko > Communications System > Nitsuko 124i/384i Software Manual

Nitsuko 124i/384i Software Manual

Here you can view all the pages of manual Nitsuko 124i/384i Software Manual. The Nitsuko manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 51

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Abbreviated DialingCode: 1037
Operation: Press key +
bin + Line or CALLDialing a stored Common
Abbreviated Dialing numberNone #2 + bin
Code: 1038 
Operation: Press key +
bin + Line or CALL keyDialing a stored Group
Abbreviated Dialing numberNone #4 + bin
Account CodesCode:1054...

Page 52

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Automatic Call
Distribution (Cont’d)Code: 1053
Operation: Press keyWo r k  T i m e
Enabling/disabling Work TimeOn if Work Time
enabled, Flashing
while on call if Auto
Work Time enabled
Off when Work Time
disabled-
Code: 1058
Operation: NoneDSS Agent Status
Using a BLF indiction...

Page 53

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
ConferenceCode: 1016 
Operation: Set up call
+ Press key + set up call
to add + Press key twiceSetting up a Conference or a
Meet Me ConferenceOn red during setup #1
Conference, Voice Call Code: 1017
Operation: Set up
trunk call + Press keySetting up a Voice Call
ConferenceNone...

Page 54

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Hold (cont.)Code: 1044 
Operation: Place or
answer call + Press keyPutting a call on Exclusive
HoldNone -
Loop KeysCode: 1078 + 0
(Incoming), 1
(Outgoing) or 2 (Both
Ways) + 000 (All trunk
groups incoming or
ARS outgoing) or
Trunk group (001-128).
Operation: Press keyPlacing or...

Page 55

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Off Hook SignalingCode: 1018 
Operation: At busy,
press keySignaling a busy extension None 7
One-Touch Serial
OperationCode:  1034 
Operation:  
Store: 852 +
One-Touch Key +
sequence + Press key
Use: Press key +
One-Touch KeyStoring, using or clearing a
One-Touch Serial...

Page 56

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Selectable Display
MessagingCode: 1081
Operation: Press keySetting up Call Forwarding
Off-Premise, Selectable
Display Messaging, VAU Park
and Page and VAU Personal
GreetingNone *4
Serial CallCode: 1035 
Operation: Trk call +
Hold + ext + Press keyPlacing a Serial Call to a co-...

Page 57

Table 1-5, Function Key Codes by Number
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
Use this key... For this feature... When you are... Key Lamp StatusAlso see
Srvc Code
Code: Trunk number
(0001-0128) or 0000 to
undefine 
Operation: Press keyCentral Office Calls Pressing a line key to place or
answer a trunk call (where
trunks are 0001-0128)On green when
seized, on red
when in use (by
other party), Slow
Flash green when
ringing, Hold flash
when on...

Page 58

Table 1-5, Function Key Codes by Number
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
Use this key... For this feature... When you are... Key Lamp StatusAlso see
Srvc Code
Code: 1015
Operation: 
Store: While on call,
Press key + number
Use: Press key + CALL
or line Erase: CALL +
Press keyMemo Dial Storing, using or checking a
Memo Dial numberNone -
Code: 1016
Operation: Set up call
+ Press key + set up
call to add + Press key
twiceConference Setting...

Page 59

Table 1-5, Function Key Codes by Number
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
Use this key... For this feature... When you are... Key Lamp StatusAlso see
Srvc Code
Code: 1029
Operation: Press key
+ ext or outside numberData Communications Setting up a Data Call On red when call
set up- 
Code: 1030
Operation: Press key
+ line keyOn a data call and wish to
block Barge In and Off Hook
SignalingOn red when call is
active-
Code: 1031 + sec. ext....

Page 60

Table 1-5, Function Key Codes by Number
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
Use this key... For this feature... When you are... Key Lamp StatusAlso see
Srvc Code
Code: 1039 + pswd
(0000)
Operation:  Press keyNight Service Activating the Day Mode On red when
activated 818 +
pswd
(0000) + 0
Code: 1040 + pswd
(0000)
Operation: Press keyActivating the Night Mode On red when
activated818 +
pswd
(0000) +1
Code: 1041 + pswd
(0000)
Operation:...
Start reading Nitsuko 124i/384i Software Manual

Related Manuals for Nitsuko 124i/384i Software Manual

All Nitsuko manuals