Nikon Camera Coolpix S9900 Reference Manual

57
Connecting the Camera to a TV, Printer, or Co mputer
Connecting the Camera to a TV, 
Printer, or Computer
You can enhance your enjoyment of  images and movies by connecting the 
camera to a TV, printer, or computer.
• Before connecting the camera to an external device, make sure the 
remaining battery level is sufficient and turn the camera off. Before 
disconnecting, make sure to turn the camera off.
• If the AC Adapter EH-62F (available separately) is used, this camera can be 
powered from an...

58
Connecting the Camera to a TV, Printer, or Co mputer
Viewing i mages on a TVE 53
Images and movies captured with the camera can be viewed 
on a TV.
Connection method: Connect a  commercially available HDMI 
cable to the TV’s HDMI input jack.
Printing i mages without using a co mputerE 54
If you connect the camera to a PictBridge-compatible printer, 
you can print images without using a computer.
Connection method: Connect the camera directly to the 
printer’s USB port with the USB cable.
Viewing and...

E1
The Reference Section provides detailed information and hints about using the 
camera.
Shooting
Tips and Notes on the Scene Mode......................................................................... E3
Default Settings (Flash, Self-ti mer, Etc.) .............................................................. E14
Focusing ......................................................................................................................... E16
The Control Range of the Shutter Speed ( A, B , C , or...

E2
Connection
Connecting to a S mart Device (Wi-Fi) ................................................................. E50
Preselecting I mages in the Ca mera That You Want to Transfer to a S mart 
Device ............................................................................................................................. E52
Connecting the Ca mera to a TV (Playback on a TV) ....................................... E53
Connecting the Ca mera to a Printer (Direct...

Reference Section
E3
•When you point the camera at the subject, the camera automatically 
recognizes the optimum scene mode from the list below and adjusts the 
shooting settings  accordingly.
• The focus area depends on the composition of the image. When the camera 
detects a human face, it focuses on that face ( E16).
• Depending on shooting conditions, the camera may not select the desired 
scene mode. In this case, select another shooting mode ( A20).
Tips and Notes on the Scene Mode
y  M  x  Scene...

Reference Section
E4
•While the shutter-release button is held a ll the way down, the camera shoots up to 
about 5 images continuously at a rate of about 7 fps (when image quality is set to 
Normal  and when image size is set to  i 4608×3456 ).
• The frame rate for continuous shootin g may become slow depending on the 
current image quality setting, image size  setting, the memory card used, or 
shooting condition.
• Focus, exposure, and hue are fixed at the values determined with the first image in...

Reference Section
E5
•On the screen displayed when  j Night landscape  is selected, select  u Hand-
held  or w Tripod .
• u  Hand-held  (default setting):
-While the j  icon on the shooting screen is displayed in green, press the 
shutter-release button all the way to ca pture a series of images which are 
combined into a single image and saved.
- Once the shutter-release butto n is pressed all the way, hold the camera still until 
a still image is displayed. After taking a pi cture, do not turn the...

Reference Section
E6
•The shutter speed is fixed at about four seconds.
• The zoom is restricted  to 10 fixed positions.
• On the screen displayed when  o Backlighting  is selected, select  On or Off  of 
HDR  (high dynamic range) composition based on the type of image you want to 
capture.
• Off  (default setting): The flash fires to prevent the subject from being hidden in 
shadow.
- When the shutter-release button is pr essed all the way down, one image is 
captured.
• On : Use when taking pictures...

Reference Section
E7
•When you point the camera at a dog or cat, the camera detects the pet’s face and 
focuses on it. By default, the shutter is automatically released when the camera 
detects a dog or cat face (pet portrait auto release).
• On the screen displayed when  O Pet portrait  is selected, select  U Single  or V  
Continuous .
- U  Single : Whenever the camera detects a dog  or cat face, the camera captures 
1 image.
- V  Continuous : Whenever the camera detects a dog or cat face, the camera...

Reference Section
E8
•On the screen displayed when  R Special effects  is selected, select the shooting 
effect.
• When  Selective color  or Cross process is 
selected, use the multi selector  HI to select 
the desired color, and press the  k button to 
apply the color. To cha nge the color selection, 
press the  k button again.
y  M  R  Special effects
TypeDescription
O Soft
(default setting) Softens the image by adding a slight blur to the entire 
image.
P Nostalgic 
sepia Adds a sepia tone and reduces...