Nikon Camera Coolpix S9900 Reference Manual

Reference Section
E49
5Use  HI  to select  m (save) and 
press the  k button.
•Follow the instructions on the screen to 
save the movie.
BNotes About Movie Editing
•A movie that was created by editing cannot be trimmed again.
• The actual trimmed portion of a movie may di ffer slightly from the portion selected 
using the start and end points.
• Movies cannot be trimmed so that th ey are less than two seconds long.
Saving a Frame from a Movie as a Still Image
The desired frame of a recorded movie can be...

Reference Section
E50
1Press the  Z (Wi-Fi) button on the 
camera.
• The screen shown on the right is displayed.
• If no connection conf irmation is received 
from the smart device within 3 minutes, the 
message  No access.  is displayed and the 
camera returns to the Wi-Fi options screen.
• You can also select  Connect to smart 
device  in the Wi-Fi options menu to 
display the screen shown on the right.
2Set the Wi-Fi setting on the smart device to On.
• Check the user’s manual provided with your smart...

Reference Section
E51
CTouching an NFC-compatible Smart Device to the Camera for a 
Wi-Fi Connection
When you use a smart device  that is compatible with 
near field communication (NFC) functions and runs 
on Android OS, you can esta blish a Wi-Fi connection 
and start the “Wireless Mobile Utility” by touching 
the NFC antenna on the smart device to the  Y (N-
Mark) on the camera.
To Terminate the Wi-Fi Connection
Perform one of the operations described below.
• Turn off the camera.
• Select  Disable...

Reference Section
E52
You can preselect images in the camera that you want to transfer to a smart 
device. Movies cannot be  preselected for transfer.
1Select images to transfer.
You can preselect the images to transfer  to a smart device in the following 
menus:
• Mark for Wi-Fi upload  in the playback menu (E82)
• Upload from camera  in the Wi-Fi options menu ( E93)
When using  Upload from camera , the SSID and password of the camera are 
displayed after images are selected.
2Connect the camera and...

E53
Reference Section
1Turn off the camera and connect it to the TV.
•Make sure that the plugs  are properly oriented. Do  not insert or remove the 
plugs at an angle when connecting or disconnecting them.
2Set the TV’s input to external input.
• See the documentation provided with your TV for details.
3Hold down the  c (playback) 
button to turn on the camera.
• Images are displayed on the TV.
• The camera monitor does not turn on.
Connecting the Camera to a TV (Playback 
on a TV)
HDMI micro connector...

E54
Reference Section
Users of PictBridge-compati ble printers can connect the camera directly to the 
printer and print images without using a computer.
Connecting the Camera to a Printer
1Turn on the printer.
2Turn off the camera and connec t it to the printer using the 
USB cable.
• Make sure that the plugs  are properly oriented. Do  not insert or remove the 
plugs at an angle when connecting or disconnecting them.
3The camera is automatically turned on.
• The  PictBridge  startup screen (
1) is...

E55
Reference Section
Printing Images One at a Time
1Use the multi selector  JK to 
select the desired image and press 
the  k button.
•Move the zoom control toward  f (h ) to 
switch to thumbnail playback or  g (i ) to 
switch to full-frame playback.
2Use  HI  to select  Copies and 
press the  k button.
•Use  HI  to set the desired number of 
copies (up to 9) and press the  k button.
3Select  Paper size  and press the  k 
button.
• Select the desired paper size and press the 
k  button.
• To print with...

E56
Reference Section
Printing Multiple Images
1When the  Print selection screen 
is displayed, press the  d (menu) 
button.
2Use the multi selector  HI to 
select  Paper size  and press the  k 
button.
• Select the desired paper size and press the 
k  button.
• To print with the paper size setting 
configured on the printer, select  Default.
• The paper size options available on the 
camera vary depending on the printer that you use.
• To exit the print menu, press the  d button.
3Select  Print...

E57
Reference Section
Print selection
Select images (up to 99) and the number of 
copies (up to 9) of each.
•Use the multi selector  JK to select 
images, and use  HI to specify the 
number of copies to be printed.
• Images selected for printing are 
indicated by  M and the number of 
copies to be printed. To cancel the print 
selection, set the number of copies to 0.
• Move the zoom control toward  g(i ) to switch to full-frame playback or 
f (h ) to switch to thumbnail playback.
• Press the k  button...

E58
Reference Section
Installing ViewNX 2
ViewNX 2 is free software that enables  you to transfer images and movies to 
your computer so that you can view, edit, or share them. To install ViewNX 2, 
download the ViewNX 2 installer from the website below and follow the 
onscreen installation instructions.
http://nikonimglib.com/nvnx/
For system requirements and other information, see the Nikon website for your 
region.
Transferring Images to a Computer
1Prepare a memory card that contains images.
You can...