Nikon Camera Coolpix S9900 Reference Manual

Reference Section
E39
1Use the multi selector  HI to 
select  Log interval , and press the 
k  button.
2Select the intervals of log 
recording and press the  k 
button.
• The default setting is  15 s.
3Select  Start log , and press the  k 
button.
4Select the duration that the log will 
be recorded, and press the  k 
button.
• Log recording starts. Press the  d button 
to exit the menu.
• D  is displayed on  the shooting screen 
during log recording ( A4).
• Log recording ends automatically after the...

Reference Section
E40
BNotes About Log Recording
•If the date and time are not set, the log cannot be recorded.
• Use a fully charged battery to prevent th e camera from turning off during log 
recording. When the battery power becomes exhausted, log recording ends.
• Even when the camera is turned off, log  recording is continuously performed until 
the preset time has elapsed if there is still time remaining for log recording.
• Log recording ends due to the operations below even when there is time...

Reference Section
E41
Ending Log Recording to Save it on Memory Cards
To display the obtained log data on the map, you need to save it to a memory 
card.
1When log recording is completed, 
select  End log  on the screen, and 
press the  k button.
•Ending log can also be performed before 
the preset time elapses.
2Select  Save log , and press the k  
button.
• The log data is saved to a memory card.
CTo Erase Log Data•To erase the log data that is tempor arily stored in the camera, select Erase log in...

Reference Section
E42
•Select the log data (date) to be displayed, and 
press the  k button. Your movement route 
based on the recorded log is displayed on the 
map.
• To erase the selected log or all saved logs, 
press the  l button on the log list screen.
• The operations list ed below can be 
performed during the map display.
CLocation Information Log Data
Log data is NMEA format-compliant. Howeve r, display in all NMEA format-compliant 
software or on all NMEA format-com pliant cameras is not...

Reference Section
E43
1Display the shooting screen.
•Check the remaining amount of movie 
recording time.
2Press the  b (e  movie-record) 
button to start movie recording.
• The focus area for autofocus differs 
depending on the setting of  AF area mode 
( E 79).
The default setting is  Face priority.
• Press the multi selector  K to pause 
recording, and press  K again to resume 
recording (except when an HS movie option 
is selected in  Movie options ). Recording 
automatically ends if it remains...

Reference Section
E44Area Captured in Movies
•
The area that is captured in  a movie varies depending on the  Movie 
options  or Movie VR  settings in the movie menu.
• If Photo info  in Monitor settings ( E97) in the setup menu is set to 
Movie frame+auto info , you can confirm the area that will be captured in 
a movie before you start recording.
Maximum Movie Recording Time
Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even when 
there is sufficient free space on the...

Reference Section
E45
Notes About Movie Recording
BNotes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing 
the remaining recording time flashes while images or movies are being saved. 
Do 
not open the battery-chamber/memory card slot cover or remove the 
battery or memory card while an indicator is flashing. Doing this could result in 
loss of data, or in damage to the camera or the memory card.
BNotes About Recorded Movies
• There may be...

Reference Section
E46
If the shutter-release button is pressed all the 
way while recording a movie, one frame is saved 
as a still image. Movie recording continues while 
the still image is being saved.
•While  Q is displayed in the monitor, still 
images can be captured. While  z is 
displayed, still images cannot be captured.
• The size of the captured image varies 
depending on the  Movie options setting 
( E 75).
BNotes About Capturing Still Images During Movie Recording
•Still images cannot be...

Reference Section
E47
To adjust the volume, move the zoom control 
while a movie is playing ( A1).
Rotate the multi selector or the command dial 
to fast forward or rewind.
Playback controls are di splayed in the monitor.
The operations desc ribed below can be 
performed by using th e multi selector JK to 
select a control and then pressing the  k 
button.
* The movie can also be advanced or rewound by rotating the multi selector or 
command dial.
Operations During Movie Playback
FunctionIconDescription...

Reference Section
E48
When editing movies, use a sufficiently charged battery to prevent the camera 
from turning off during editing. Wh en the battery level indicator is B, movie 
editing is not possible.
Extracting Only the Desired Portion of a Movie
The desired portion of a recorded movi e can be saved as a separate file.
1Play back a desired movie and pause at the start point of 
the portion that you want to extract (E47).
2Use the multi selector  JK to 
select  I in the playback controls, 
and then...