Nikon Camera Coolpix Aw130 Reference Manual

131
Using Menus
Reset All
When Reset is selected, the camera’s settings are restored to their default 
values.
• Some settings, such as  Time zone and date or Language , are not reset.
• This setting cannot be selected while Wi-Fi is connected.
CResetting File Numbering
To reset file numbering to “0001”, delete all images saved on the memory card or in 
the internal memory ( A16) before selecting  Reset all.
Conformity Marking
View some of the conformity markings that the camera complies with.
Firmware...

132
Using Location Data Functions/Displaying Maps
Using Location Data Functions/
Displaying Maps
The camera starts to receive signals from positioning satellites when Record 
location data in Location data options  in the z (location data options) 
menu ( A78) is set to  On.
Reception status can be checked on the shooting 
screen.
• n  or o : The camera receives signals from three 
or more satellites and is calculating the location 
data.
• z: The camera receives signals, but is not able to 
perform...

133
Using Location Data Functions/Displaying Maps
Set Time zone and date  (A119) correctly before using the location data 
functions.
1Set  Record location data  to On.
•Press the  d button or shutter-release 
button to exit the menu screen after the 
setting is complete.
• Operate the camera under the open sky to 
get better reception.
2Check the reception status on the 
shooting screen.
•n  or o : The camera receives signals 
from three or more satellites and is 
calculating the location data. The...

134
Using Location Data Functions/Displaying Maps
BNotes About Location Data Functions
•Before using the location data functions,  read " Notes About Location 
Data Functions (GPS/GLONASS, Electronic Compass)" ( Axv).
• It takes a few minutes to calculate location  data when positioning is performed for 
the first time or after a long period in wh ich positioning could not be performed, or 
just after the battery is replaced.
• You can reduce the time for calculating location data by using the...

135
Using Location Data Functions/Displaying Maps
CPoints of Interest (POI) Information
POI information is location name information for 
the nearest landmarks (facilities) and other 
details. 
•When  Display POI  in Points of interest 
(POI)  (A 113) in the location data options 
menu is set to  On, the nearest location name 
information for the current position is 
displayed during shooting (only when the 
camera is positioning).
• When  Embed POI  is set to On, location name 
information can be...

136
Using Location Data Functions/Displaying Maps
Displaying the Shooting Location (Playback Mode)
*The z icon is displayed during playback for images which have the location data 
recorded ( A5).
•Shooting location: The shooting location of 
the image with recorded location data is 
displayed on a map. The shooting location of 
the image selected before the  U button was 
pressed is displayed in yellow.
The approximate shooting direction is 
indicated by  C for images captured when 
Compass display  is...

137
Using Location Data Functions/Displaying Maps
Operations When Thumbnail Images Are Selected
*Only Altitude/depth logs  can be selected if the camera was recording an 
altitude/depth log when shooting the selected images. Only  Scroll map can be 
selected if the camera was not recording an altitude/depth log.
BNotes About Map Display
• Maps cannot be displayed while the camera is being charged with the charging 
AC adapter.
• The map display cannot be rotated. Only the north up display (the top of the...

138
Using Location Data Functions/Displaying Maps
Displaying the Current Position on a Map 
(Shooting Mode)
1 See “Recording Location Data to Images” (A133) for more information.
2 A world map is displayed by pressing the U  button when the camera is not 
positioning.
• The current position is displayed in the center 
of the map. You can save a location and 
display the map recorded with the saved 
location.
• When the camera lens faces downward, a 
compass is displayed.
• The previously displayed map is...

139
Using Location Data Functions/Displaying Maps
CNotes About Direction and Location Data Display
Direction or location data, etc. is displayed when a map is being displayed in 
shooting mode or if the U button is held down while the power is off.
1   Date and time
2 Location data reception
3  Create log display (location data)
4  Create log display (altitude/water depth)
5 Altitude
6 Atmospheric pressure
7 Direction
8  Latitude and longitude
9  Location name information (Points of  Interest: POI)*
10...

140
Using Location Data Functions/Displaying Maps
You can check the atmospheric pressure as well as the altitude or water depth 
of the current position on the screen, and record the displayed values to the 
captured images.
•The altitude, water depth, and atmospheric pressure that are recorded to 
images can be imprinted on the images by using  Data imprint (A 68) in 
the playback menu.
• Captured images and related logs can be displayed if you use the altitude or 
water depth log recording functions (...