Nikon Camera Coolpix Aw130 Reference Manual

141
Using Location Data Functions/Displaying Maps
1Use the multi selector HI to 
select the type of log to record, 
and press the k  button.
•Start all logs : Location, altitude, and water 
depth data logs are recorded.
• Start location log : A location data log is 
recorded.
• Start depth log : A water depth log is 
recorded.
2Select the interval to use for log 
recording, and press the k  
button.
• The intervals that can be set vary 
depending on the type of log that is 
recorded.
• If Start depth log...

142
Using Location Data Functions/Displaying Maps
BNotes About Log Recording•If the date and time are not set, the log cannot be recorded.
• When recording all logs or a water depth log, correct the altitude or water depth 
using  Alt./depth correction  in Altitude/depth options  (A 118) in the location 
data options menu before log recording starts.
• Use a fully charged battery to prevent the camera from turning off during log 
recording. When the battery power becomes exhausted, log recording ends....

143
Using Location Data Functions/Displaying Maps
Ending Log Recording and Saving Logs on a 
Memory Card
Recorded logs must to be saved to a memory card in order to display them on 
a map or as a graph.
1When log recording is completed, 
select the log to end and press the 
k button.
•You can select the log to end recording 
before the specified time duration elapses.
2Select  Save logs , and press the  k 
button.
• The log data is saved to a memory card.
BNotes About Log Data
•No log data is saved if...

144
Using Location Data Functions/Displaying Maps
Displaying the Recorded Location Data on a Map
•When you select a log (date) that you want to 
display and press the  k button, the route of 
the recorded log is displayed on a map.
• Press the  l button when the log list screen is 
displayed to delete the selected log or all saved 
location logs.
• The operations described below can be 
performed while a map is displayed.
* Action control can be used ( A20).
CLocation Log Data
Log data is NMEA...

145
Using Location Data Functions/Displaying Maps
Display Altitude/depth Logs as a Graph
•Select a log (date) that you want to display 
and press the  k button to display the 
altitude or water depth data as a graph.
- The horizontal axis of the graph shows 
the total time of log recording, and the 
vertical axis of the graph shows the total 
variations in altitude/depth during log 
recording.
- If images were captured while the log  was being recorded, they are displayed 
as thumbnails, and shooting...

146
Using the Wi-Fi (Wireless LAN) Function
Using the Wi-Fi (Wireless LAN) 
Function
You can perform the following functions if you install the dedicated software 
“Wireless Mobile Utility” on your smart device that runs on Android OS or iOS, 
and connect it to the camera.
Take Photos
You can capture still images using the two methods described below.
•Release the shutter on the camera and save the captured images to a smart device.•Use a smart device to remotely release the camera shutter and save...

147
Using the Wi-Fi (Wireless LAN) Function
1Press the Z (Wi-Fi) button on the 
camera.
• The screen shown on the right is displayed.
• If no connection confirmation is received 
from the smart device within three 
minutes,  No access.  is displayed and the 
camera returns to the Wi-Fi options screen.
• You can also select  Connect to smart 
device  in the Wi-Fi options menu to 
display the screen shown on the right. 
2Set the Wi-Fi setting on the smart device to On.
• Check the user’s manual provided...

148
Using the Wi-Fi (Wireless LAN) Function
To Terminate the Wi-Fi Connection
Perform one of the operations described below.
•Turn off the camera.
• Select  Disable Wi-Fi  in the Wi-Fi options menu on the camera (except when the 
camera is operated by remote control).
• Set the Wi-Fi setting on  the smart device to Off.
BNotes About Wi-Fi Connection
•Wi-Fi connection operations are disabled in the following situations:
- When the camera is connected to a TV, computer, or printer
- While recording movies...

149
Using the Wi-Fi (Wireless LAN) Function
You can preselect images in the camera that you want to transfer to a smart 
device. Movies cannot be preselected for transfer.
1Select images to transfer.
You can preselect the images to transfer to a smart device in the following 
menus:
• Mark for Wi-Fi upload  in the playback menu (A94)
• Upload from camera  in the Wi-Fi options menu ( A108) 
When using Upload from camera , the SSID and password of the camera are 
displayed after images are selected....

150
Connecting the Camera to a TV, Printer, or Computer
Connecting the Camera to a TV, 
Printer, or Computer
You can enhance your enjoyment of images and movies by connecting the 
camera to a TV, printer, or computer.
•Before connecting the camera to an external device, make sure the 
remaining battery level is sufficient and turn the camera off. Additionally, 
open the battery-chamber/memory card slot cover and make sure that no 
water droplets are inside. Wipe away any moisture with a soft dry cloth...