Nikon Camera Coolpix Aw130 Reference Manual

111
Using Menus
2Use a card reader or other device to copy the downloaded 
file to the “NCFL” folder of the memory card.
•The “NCFL” folder is located directly under the memory card root directory. If 
the memory card does not have “NCFL” folder, create a new folder.
3Insert the memory card containi ng the copied file into the 
camera.
4Turn on the camera.
5Press the d  button to display the location data options 
menu, and use the multi selector to select  Location data 
options.
6Select  Update A-GPS...

112
Using Menus
Calculate Distance
Calculate the linear distance from the current position to the shooting location 
of the image or between the shooting locations of two images.
1Use the multi selector HI to 
select the desired option for 
calculating the distance, and press 
the  k button.
•When  Position now image  is selected, 
the camera starts calculating the current 
position. Proceed to step 3.
2Use  JK  to select the image that is 
the start point, and press the  k 
button.
• To adjust the...

113
Using Menus
Points of Interest (POI) (Recording and Displaying 
Location Name Information)
Configure the POI (Points of Interest, location name information) settings.
CPOI Display
If there is no location name information at the set display level, the location name 
information may not be displayed or “---” may be displayed.
Press the d button  M z  (location data options) menu icon  M Points 
of interest (POI) M  k  button
OptionDescription
Embed POI Set whether or not to record the location name...

114
Using Menus
Create Log
Start or stop recording logs, and save them (A141).
* Cannot be selected if there is a log that has not been saved. Select  End all logs, 
End location log , or End depth log, and save or delete the log.
Press the d button M  z  (location data options) menu icon  M Create 
log  M k  button
OptionDescription
Start all logs* The camera records location, altitude, and water depth 
logs.
•
Select an interval and time duration that the camera 
uses for log recording. The default...

115
Using Menus
View Log
Check or erase the log data stored on the memory card using Create log 
( A 114).
Set Clock from Satellite
Signals from the positioning satellites are used to set the date and time of the 
camera’s internal clock. Check the positioning status before setting the clock 
using this option.
BNotes About Set Clock from Satellite
•To set the camera's internal clock, posi tioning must have been done successfully 
( A 132).
• Date/time adjustment by  Set clock from satellite is set...

116
Using Menus
Electronic Compass
Press the d button  M z  (location data options) menu icon  M 
Electronic compass  M k  button
OptionDescription
Compass display Set whether or not to displa
y a compass on the shooting 
screen.
• Default setting:  Off
• The direction the camera is pointing is displayed based 
on measured direction information.
• When the camera lens faces downward, the compass 
display switches to a circle compass with a red arrow 
that points north.
-Display style: north, east, south,...

117
Using Menus
BNotes About Using the Electronic Compass
•The electronic compass is not displayed when the camera lens is facing upwards.
• Do not use the electronic compass in this camera for mountain climbing and other 
specialized applications. The displayed info rmation is intended as a general guide 
only.
• Direction may not be measured correctly near the following objects: 
magnets, metals, electrical motors, electric al home appliances or electrical power 
cables.
• Direction may not be measured...

118
Using Menus
Altitude/depth Options
BNotes About Altitude/Depth Options
•To correct the altitude or water depth using  Use location data of Alt./depth 
correction,  Record location data  in Location data options  in the location data 
options menu must be set to  On, and also positioning must have been performed 
based on signals received from four or more satellites ( A132).
• When  Altimeter/depth gauge  is set to On, the altimeter or depth gauge, altitude 
or water depth, and the atmospheric...

119
Using Menus
Time Zone and Date
Set the camera clock.
Setting the Time Zone
1Use the multi selector HI to 
select  Time zone  and press the  k 
button.
The Setup Menu
Press the  d button M  z  menu icon  M Time zone and date  M k  
button
OptionDescription
Date and time •
Select a field: Press the 
multi selector JK .
• Edit the date and time: 
Press  HI.
• Apply the setting: Select 
the minute setting and 
press the  k button.
Date format Select 
Year/Month/Day , Month/Day/Year , or Day/Month/
Year...

120
Using Menus
2Select w Home time zone  or x 
Travel destination  and press the 
k  button.
•The date and time displayed in the monitor 
changes depending on whether the home 
time zone or travel destination is selected.
3Press  K.
4Use  JK  to select the time zone.
•Press  H to enable daylight saving time 
function, and  W is displayed. Press  I to 
disable the daylight saving time function.
• Press the  k button to apply the time zone.
• If the correct time is not displayed for the 
home or travel...