Nikon Camera Coolpix Aw130 Reference Manual

81
Using Menus
BNotes About Printing Images at 1:1 Aspect Ratio
Change the printer setting to “Border” when printing images at a 1:1 aspect ratio. 
Some printers may not be able to print images at a 1:1 aspect ratio.
BNotes About Image Mode
This function may not be available to  use in combination with other functions 
( A 56).
CNumber of Images That Can Be Saved
•The approximate number of images that can be saved can be checked in the 
monitor when shooting ( A11).
• Note that due to JPEG compression,...

82
Using Menus
White Balance (Adjusting Hue)
Adjust white balance to suit the light source or weather conditions in order to 
make the colors in images match what you see with your eyes.
BNotes About White Balance
•Set the flash to  W (off) when white balance is set to any setting other than  Auto 
and  Flash  (A 44).
• This function may not be available to  use in combination with other functions 
( A 56).
Enter shooting mode M  A  (shooting mode) button M  A  (auto) mode 
M  k  button M  d  button M...

83
Using Menus
Using Preset Manual
Use the procedure below to measure the white balance value under the 
lighting used during shooting.
1Place a white or gray reference object under the lighting 
that will be used during shooting.
2Use the multi selector HI to 
select  Preset manual  in the 
White balance  menu, and press 
the  k button.
•The camera zooms in to the position for 
measuring white balance.
3Select  Measure.
•To apply the last measured value, select 
Cancel  and press the k  button.
4Frame...

84
Using Menus
Continuous Shooting
Enter shooting mode M A  (shooting mode) button M  A  (auto) mode 
M  k  button M  d  button M  Continuous  M k  button
OptionDescription
U Single 
(default setting) One image is captured each time the shutter-release 
button is pressed.
k  Continuous H While the shutter-release button is held all the way down, 
images are captured continuously.
•
The frame rate for continuous shooting is about 7.0 fps 
and the maximum number of continuous shots is about 
5 (when image...

85
Using Menus
BNotes About Continuous Shooting
•Focus, exposure, and white balance are fixed at the values determined with the 
first image in each series.
• It may take some time to save the images after shooting.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate for continuous shooting may vary depending on the current image 
mode setting, the memory card used, or shooting condition.
• When using Pre-shooting cache , Continuous H: 120 fps , or Continuous H: 
60...

86
Using Menus
CPre-shooting Cache
When the shutter-release button is pressed halfway or all the way down, images are 
saved as described below.
•The pre-shooting cache icon ( Q) on the shooting screen changes to green while 
the shutter-release button is pressed halfway.
Images saved before pressing all the wayImages saved by pressing all 
the way
Press down halfway Press down all the way 

87
Using Menus
ISO Sensitivity
A higher ISO sensitivity allows darker subjects to be captured. Additionally, 
even with subjects of similar brightness, pictures can be taken at faster shutter 
speeds, and blurring caused by camera shake and subject movement can be 
reduced.
•When a higher ISO sensitivity is set, images may contain noise.
BNotes About ISO Sensitivity
This function may not be available to  use in combination with other functions 
( A 56).
CISO Sensitivity Display on the Shooting Screen
•...

88
Using Menus
AF Area Mode
Use this option to determine how the camera selects the focus area for 
autofocus when shooting still images.Enter shooting mode M
 A  (shooting mode) button M  A  (auto) mode 
M  k  button M  d  button M  AF area mode  M k  button
OptionDescription
a Face priority When the camera detects 
a human face, it focuses 
on that face. 
See “Using Face 
Detection” (
A51) for 
more information.
When framing a 
composition with no 
human subjects or 
detected faces, the 
camera...

89
Using Menus
BNotes About AF Area Mode
•When digital zoom is in effect, the camera focuses in the center of the frame 
regardless of the  AF area mode setting.
• This function may not be available to  use in combination with other functions 
( A 56).
CAF Area Mode for Movie Recording
AF area mode for movie recording can set with AF area mode  (A 104) in the movie 
menu. y
Center The camera focuses on 
the subject in the center 
of the frame.
s  Subject 
tracking Use this function to take 
pictures of...

90
Using Menus
Using Subject Tracking
1Register a subject.
•Align the subject that you want to track 
with the border in the center of the monitor 
and press the  k button.
• When the subject is registered, a yellow 
border (focus area) is displayed around it 
and the camera begins tracking the subject.
• If the subject cannot be registered, the 
border is displayed in red. Change the 
composition and try registering the subject 
again.
• To cancel subject registration, press the  k button.
• If the...