Home > Netgear > Router > Netgear Wnr2020v1 5pt N300 Wireless Router User Manual

Netgear Wnr2020v1 5pt N300 Wireless Router User Manual

Here you can view all the pages of manual Netgear Wnr2020v1 5pt N300 Wireless Router User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 41

Networking 41
 N150 and N300 Wireless Routers
The screen adjusts.
7. 
Complete the  Device Name and  MAC Address fields.
8.  Click the  Add button.
The Wireless Card Access List screen displays with the device that you added in the  access list.
9.  When you have finished adding devices to the access list, select the  T
 urn Access Control 
On check box.
10.  Click the  Apply button.
Your changes are saved. 

Page 42

Networking 
42 N150 and N300 Wireless Routers 
Specify WPS Settings
Wi-Fi Protected Setup (WPS) lets you join the WiFi network without typing the WiFi 
password.
To specify WPS Settings:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are...

Page 43

Networking 
43  N150 and N300 Wireless Routers
wired and wireless clients, but connects to the Internet through the wireless base station. 
The router can function either as a base station or as a repeater:
•Wireless base station. The router acts as the parent access point, bridging traffic to and 
from the child repeater access point, as well as handling wireless and wired local 
computers. To configure this mode, you must know the MAC address of the child repeater 
access point.
•Wireless repeater. The...

Page 44

Networking 44
N150 and N300 Wireless Routers 
5. 
Select the  Enable Wireless Repeating Function check box. 
6.  Select the  W
 ireless Base Station  radio button.
7. To prevent wireless clients from associating with the base station and al\
low LAN client 
associations only, select the  Disable Wireless Client Association check box.
You can leave the check box cleared if you prefer wireless clients to be \
able to associate  with the base stations.
8.  In the  Repeater MAC 
 Address 1 through 4 fields,...

Page 45

Networking 45
 N150 and N300 Wireless Routers
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > Wireless Repeating Function . 
The Wireless Repeating Function screen displays. The wireless MAC address of the  router displays onscreen.
5.  Select the Enable W
 ireless Repeating Function check box. 
6....

Page 46

Networking 
46 N150 and N300 Wireless Routers 
Static Routes
Static routes provide more routing information to your router. Under usual circumstances, the 
router has adequate routing information after it has been configured for Internet access, and 
you do not need to configure more static routes. You must configure static routes only for 
unusual cases such as multiple routers or multiple IP subnets on your network.
As an example of when a static route is needed, consider the following case:
•Your...

Page 47

Networking 47
 N150 and N300 Wireless Routers
The screen adjusts:
6. 
In the Route Name field, type a name for this static route (for identification purposes \
only). 
7.  If you want to limit access to the LAN only
 , select the Private check box. 
8.  T
o make this route effective, select the  Active check box. 
By default, the  Active check box is selected.
9.  T
ype the IP address of the final destination.
10.  T
ype the IP subnet mask for this destination. If the destination is a sin\
gle host, type...

Page 48

Networking 
48 N150 and N300 Wireless Routers 
The Static Routes screen adjusts.
7. Edit the route information.
8. Click the Apply button.
Your changes are saved.
To delete a static route:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are...

Page 49

Networking 49
 N150 and N300 Wireless Routers
4. 
Select  Attached Devices.
The Wired Devices section lists devices that are connected to the router\
 with Ethernet 
cables. The Wireless Devices section lists devices that are connected to the wir\
eless 
network. 
The following information is displayed: • Status. 
 The status of the device, Allowed or Blocked.
• Device Name. If the device name is known, it is shown here. 
• IP Address. 
 The IP address that the router assigned to this device when it...

Page 50

Networking 50
N150 and N300 Wireless Routers 
4. 
Select  ADVANCED > Advanced Setup > UPnP .
5. Select the  Turn UPnP On check box.
By default, this check box is selected. If the T
 urn UPnP On check box is cleared, the 
router  does not allow any device to automatically control router  resources, such as port 
forwarding.
6.  T
ype the advertisement period in minutes.
The advertisement period specifies how often the  router broadcasts its UPnP information. 
This value can range from 1 to 1440 minutes....
Start reading Netgear Wnr2020v1 5pt N300 Wireless Router User Manual

Related Manuals for Netgear Wnr2020v1 5pt N300 Wireless Router User Manual

All Netgear manuals