Netgear Wndr3700v5 N600 Wifi Router User Manual

Network Settings 
111  N600 WiFi Dual Band Gigabit Router
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup screen displays.
5. Select the Default DMZ Server check box.
6. Type the IP address.
7. Click the Apply button.
Your change takes effect.
Change the Router’s Device Name
The router’s device...

Network Settings 112
N600 WiFi Dual Band Gigabit Router 
Change the LAN TCP/IP Settings
The router is preconfigured to use private IP addresses on the LAN side \
and to act as a 
DHCP server. The router’s default LAN IP configuration is as follows:
• LAN IP address. 192.168.1.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use\
 in private networks  and are suitable for most applications. If your network requires a dif
 ferent IP addressing 
scheme, you...

Network Settings 
113  N600 WiFi Dual Band Gigabit Router
7. Change the RIP settings.
Router Information Protocol (RIP) allows a router to exchange routing information with 
other routers. 
a.Select a RIP direction:
•Both. The router broadcasts its routing table periodically and incorporates 
information that it receives.
•Out Only. The router broadcasts its routing table periodically. 
•In Only. The router incorporates the RIP information that it receives.
b. Select a RIP version:
•Disabled. This is the...

Network Settings 114
N600 WiFi Dual Band Gigabit Router 
4. 
Select  ADVANCED > Setup > LAN Setup .
5. Make sure that the Use Router as DHCP Server  check box is selected.
6.  Specify the range of IP addresses that the router assigns:
a. In the Starting IP 
 Address field, type the lowest number in the range.
This IP address must be in the same subnet as the router.
b.  In the Ending IP 
 Address field, type the number at the end of the range of IP 
addresses.
This IP address must be in the same subnet...

Network Settings 
115  N600 WiFi Dual Band Gigabit Router
To disable the DHCP server feature in the router:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN...

Network Settings 
116 N600 WiFi Dual Band Gigabit Router 
Choose an IP address from the router’s LAN subnet, such as 192.168.1.x. 
7. Type the MAC address of the computer or server.
Tip:If the computer is already on your network, you can copy its MAC 
address from the Attached Devices screen and paste it here.
8. Click the Apply button.
The reserved address is entered into the table. 
The reserved address is not assigned until the next time the computer contacts the router’s 
DHCP server. Reboot the...

Network Settings 
117  N600 WiFi Dual Band Gigabit Router
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
5. Select the radio button next to the reserved address. 
6. Click the Delete button.
The address is removed.
Use the WPS Wizard for WiFi Connections
The WPS Wizard helps...

Network Settings 
118 N600 WiFi Dual Band Gigabit Router 
Specify Basic WiFi Settings
The router comes with preset security. This means that the WiFi network name (SSID), 
network key (password), and security option (encryption protocol) are preset in the factory. 
You can find the preset SSID and password on the router label. 
Note:The preset SSID and password are uniquely generated for every 
device to protect and maximize your wireless security.
NETGEAR recommends that you do not change your preset...

Network Settings 119
 N600 WiFi Dual Band Gigabit Router
4. 
Select  Wireless.
You can specify the settings for the 2.4 GHz band and for the 5 GHz band.\
5.  In the Region menu, select your region. 
In some locations, you cannot change this setting.
6.  T
o control the SSID broadcast, select or clear the  Enable SSID Broadcast check box.
When this check box is selected, the router broadcasts its network name \
(SSID) so that it 
displays when you scan for local WiFi networks on your computer or wirel\...

Network Settings 
120 N600 WiFi Dual Band Gigabit Router 
If you connected wirelessly to the network and you changed the SSID, you are 
disconnected from the network.
11. Make sure that you can connect wirelessly to the network with its new settings. 
If you cannot connect wirelessly, check the following:
•Is your computer or wireless device connected to another wireless network in your 
area? Some wireless devices automatically connect to the first open network without 
wireless security that they...