Home > Netgear > Router > Netgear Wndr3700v5 N600 Wifi Router User Manual

Netgear Wndr3700v5 N600 Wifi Router User Manual

Here you can view all the pages of manual Netgear Wndr3700v5 N600 Wifi Router User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 101

Manage Your Network 101
 N600 WiFi Dual Band Gigabit Router
•
The  Destination IP Address and IP Subnet Mask fields specify that this static route 
applies to all 134.177.x.x addresses. 
• The  Gateway IP 
 Address field specifies that all traffic for these addresses will be 
forwarded to the ISDN router at 192.168.1.100. 
• A metric value of 1 works because the ISDN router is on the LAN. 
• The  Private  check box is selected only as a precautionary security measure in case \
RIP 
is activated.
Set Up a...

Page 102

Manage Your Network 
102 N600 WiFi Dual Band Gigabit Router 
The gateway IP address must be on the same LAN segment as the router. 
12. Type a number from 1 through 15 as the metric value. 
This value represents the number of routers between your network and the destination. 
Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1. 
13. Click the Apply button.
The static route is added. 
Edit a Static Route
To edit a static route:
1. Launch a web browser from a computer or...

Page 103

Manage Your Network 103
 N600 WiFi Dual Band Gigabit Router
The user name is 
admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > Static Routes .
The Custom Static Routes screen displays.
5.  In the table, select the radio button for the route.
6.  Click the  Delete button.
The route is removed from the table.
View Devices Currently on the Network
You can view all computers or devices that are...

Page 104

Manage Your Network 104
N600 WiFi Dual Band Gigabit Router 
Manage the Router Configuration File
The configuration settings of the router are stored within the router in\
 a configuration file. You 
can back up (save) this file to your computer, restore it, or reset it to the factory default 
settings.
Back Up Settings
To back up the router’s configuration settings:
1. 
Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or...

Page 105

Manage Your Network 
105  N600 WiFi Dual Band Gigabit Router
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings screen displays.
5. Click the Browse button to find and select the .cfg file. 
6. Click the Restore button.
The file is uploaded to the router and the router reboots.
WARNING:
Do not...

Page 106

Manage Your Network 106
N600 WiFi Dual Band Gigabit Router 
Remote Management
You can access your router over the Internet to view or change its settin\
gs. You must know 
the router’s WAN IP address to use this feature. For information about remote access u\
sing 
Dynamic DNS, see Chapter 7, Access Storage Devices Through the Internet . 
Note:Be sure to change the password for the user name admin to a secure 
password. The ideal password contains no dictionary words from any 
language and contains...

Page 107

Manage Your Network 
107  N600 WiFi Dual Band Gigabit Router
•Only This Computer. Allow access from a single IP address on the Internet. Enter 
the IP address to be allowed access. 
•IP Address Range. Allow access from a range of IP addresses on the Internet. Enter 
a beginning IP address and an ending IP address to define the allowed range. 
•Everyone. Allow access from any IP address on the Internet. 
7. Specify the port number for accessing the web management interface.
Normal web browser access uses...

Page 108

108
10
10.   Network Settings
The router comes ready for WiFi, Ethernet, and USB connections. You can customize the 
router’s network settings. NETGEAR recommends that you install the router and connect it to 
the Internet before you change its network settings.
This chapter includes the following sections:
•View or Change WAN Settings 
•Set Up a Default DMZ Server 
•Change the Router’s Device Name 
•Change the LAN TCP/IP Settings 
•Specify the IP Addresses That the Router Assigns 
•Disable the DHCP...

Page 109

Network Settings 109
 N600 WiFi Dual Band Gigabit Router
View or Change WAN Settings
You can view or configure wide area network (WAN) settings for the Internet port. You can 
set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and 
enable the router to respond to a ping to its WAN (Internet) port. 
To view or change the WAN settings:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net...

Page 110

Network Settings 
110 N600 WiFi Dual Band Gigabit Router 
•Disable IGMP Proxying. IGMP proxying allows a computer on the local area network 
(LAN) to receive the multicast traffic it is interested in from the Internet. If you do not 
need this feature, you can select this check box to disable it.
•MTU Size (in bytes). The normal MTU (maximum transmit unit) value for most 
Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. Change the 
MTU only if you are sure that it is necessary for...
Start reading Netgear Wndr3700v5 N600 Wifi Router User Manual

Related Manuals for Netgear Wndr3700v5 N600 Wifi Router User Manual

All Netgear manuals