Netgear Rbk50 Orbi Ac3000 Tri Band Wifi System User Manual

Specify Network Settings 61
 Orbi High-Performance
 AC3000 Tri-band WiFi System
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED > Setup > WAN Setup .
The WAN Setup page displays.
5.  Select the Default DMZ Server  check box.
6.  T
ype the IP address.
7.  Click the  Apply button.
Your settings are saved.
Change the Router’s Device Name
The router’s device name is its model number. This device...

Specify Network Settings 62
Orbi High-Performance
 AC3000 Tri-band WiFi System 
Change the LAN TCP/IP Settings
The router is preconfigured to use private IP addresses on the LAN side \
and to act as a 
DHCP server. The router’s default LAN IP configuration is as follows:
• LAN IP address. 192.168.1.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use\
 in private networks  and are suitable for most applications. If your network requires a dif
 ferent IP...

Specify Network Settings 
63  Orbi High-Performance AC3000 Tri-band WiFi System
7. Change the RIP settings.
Router Information Protocol (RIP) allows a router to exchange routing information with 
other routers. 
a.Select the RIP direction:
-Both. The router broadcasts its routing table periodically and incorporates 
information that it receives.
-Out Only. The router broadcasts its routing table periodically. 
-In Only. The router incorporates the RIP information that it receives.
b. Select the RIP...

Specify Network Settings 64
Orbi High-Performance
 AC3000 Tri-band WiFi System 
4. Select  ADVANCED > Setup > LAN Setup .
5. Make sure that the Use Router as DHCP Server  check box is selected.
6.  Specify the range of IP addresses that the router assigns:
a. In the Starting IP 
 Address field, type the lowest number in the range.
This IP address must be in the same subnet as the router.
b.  In the Ending IP 
 Address field, type the number at the end of the range of IP 
addresses.
This IP address must...

Specify Network Settings 65
 Orbi High-Performance
 AC3000 Tri-band WiFi System
To disable the DHCP server feature in the router:
1. Launch a web browser from a WiFi-enabled computer or mobile device that \
is 
connected to the network.
2.  Enter  orbilogin.com.
A login window opens.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED > Setup > LAN...

Specify Network Settings 66
Orbi High-Performance
 AC3000 Tri-band WiFi System 
A login window opens.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED > Setup > LAN Setup .
5. In the Address Reservation section of the page, click the  Add button. 
6. In the IP Address field, type the IP address to assign to the computer or server. 
Choose an IP...

Specify Network Settings 67
 Orbi High-Performance
 AC3000 Tri-band WiFi System
Edit a Reserved IP Address
To edit a reserved address entry:
1. Launch a web browser from a WiFi-enabled computer or mobile device that \
is 
connected to the network.
2.  Enter  orbilogin.com.
A login window opens.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED >...

Specify Network Settings 68
Orbi High-Performance
 AC3000 Tri-band WiFi System 
3. Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED > Setup > LAN Setup .
5. Select the radio button next to the reserved address. 
6.  Click the  Delete button.
The address is removed.
Custom Static Routes
Typically, you do not need to add static routes unless you use...

Specify Network Settings 69
 Orbi High-Performance
 AC3000 Tri-band WiFi System
•The  Destination IP Address and IP Subnet Mask fields specify that this static route 
applies to all 134.177.x.x addresses.
• The  Gateway IP 
 Address field specifies that all traffic for these addresses will be 
forwarded to the ISDN router at 192.168.1.100.
• A metric value of 1 works because the ISDN router is on the LAN.
• The  Private  check box is selected only as a precautionary security measure in case \
RIP 
is...

Specify Network Settings 
70 Orbi High-Performance AC3000 Tri-band WiFi System 
If the destination is a single host, type 255.255.255.255. 
11. Type the gateway IP address.
This address must be on the same LAN segment as the router. 
12. Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination. 
Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1. 
13. Click the Apply button.
The static route...