Home > Netgear > Router > Netgear Rbk50 Orbi Ac3000 Tri Band Wifi System User Manual

Netgear Rbk50 Orbi Ac3000 Tri Band Wifi System User Manual

Here you can view all the pages of manual Netgear Rbk50 Orbi Ac3000 Tri Band Wifi System User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 21

Specify Your Internet Settings 21
 Orbi High-Performance
 AC3000 Tri-band WiFi System
Use the Internet Setup Wizard
You can use the Setup Wizard to detect your Internet settings and automat\
ically set up your 
router. 
To use the Setup Wizard:
1.  Launch a web browser from a WiFi-enabled computer or mobile device that \
is 
connected to the network.
2.  Enter  orbilogin.com.
A login window opens.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password....

Page 22

Specify Your Internet Settings 22
Orbi High-Performance
 AC3000 Tri-band WiFi System 
Manually Set Up the Internet Connection
You can view or change the router’s Internet connection settings.
Specify an Internet Connection Without a Login
To specify the Internet connection settings:
1. Launch a web browser from a WiFi-enabled computer or mobile device that \
is 
connected to the network.
2.  Enter  orbilogin.com.
A login window opens.
3.  Enter the router user name and password.
The user name is  admin....

Page 23

Specify Your Internet Settings 
23  Orbi High-Performance AC3000 Tri-band WiFi System
For the other sections in this page, the default settings usually work, but you can change 
them.
8. Select an Internet IP Address radio button:
•Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP 
automatically assigns these addresses.
•Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP 
address that your ISP assigned. The gateway is the ISP router to which...

Page 24

Specify Your Internet Settings 24
Orbi High-Performance
 AC3000 Tri-band WiFi System 
4. Select  Internet .
5. Select the Does your Internet connection require a login  Ye s radio button.
The page adjusts.
6.  From the Internet Service Provider menu, select the encapsulation method:
The selections are PPPoE, PPTP , or L2TP.
7.  In the Login field, enter the login name your ISP gave you. 
This login name is often an email address.
8.  In the Password field, type the password that you use to log in to your...

Page 25

Specify Your Internet Settings 
25  Orbi High-Performance AC3000 Tri-band WiFi System
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your 
ISP automatically assigns this address. 
•Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary 
DNS server address is available, enter it also. 
14. Select a Router MAC Address radio button:
•Use Default Address. Use the...

Page 26

Specify Your Internet Settings 
26 Orbi High-Performance AC3000 Tri-band WiFi System 
Your Internet service provider (ISP) can provide this information. For more information 
about IPv6 Internet connection, see the following sections:
-Use Auto Detect for an IPv6 Internet Connection on page 26
-Use Auto Config for an IPV6 Internet Connection on page 28
-Set Up an IPv6 6rd Tunnel Internet Connection on page 29
-Set Up an IPv6 6to4 Tunnel Internet Connection on page 31
-Set Up an IPv6 Pass Through Internet...

Page 27

Specify Your Internet Settings 27
 Orbi High-Performance
 AC3000 Tri-band WiFi System
5. From the Internet Connection Type  menu, select Auto Detect.
The router automatically detects the information in the following fields\
:
• Connection T
 ype. This field indicates the connection type that is detected.
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is...

Page 28

Specify Your Internet Settings 28
Orbi High-Performance
 AC3000 Tri-band WiFi System 
Use Auto Config for an IPV6 Internet Connection
To set up an IPv6 Internet connection through auto configuration:
1. Launch a web browser from a WiFi-enabled computer or mobile device that \
is 
connected to the network.
2.  Enter  orbilogin.com.
A login window opens.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are...

Page 29

Specify Your Internet Settings 
29  Orbi High-Performance AC3000 Tri-band WiFi System
Most people can leave this field blank, but if your ISP gave you a specific host name, 
enter it here.
7. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the 
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz 
as the domain name. If your ISP provided a domain name, type...

Page 30

Specify Your Internet Settings 30
Orbi High-Performance
 AC3000 Tri-band WiFi System 
3. Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5.  In the Internet Connection T
 ype menu, select 6rd.
The router automatically detects the information in the following sectio\
ns:
• 6rd (IPv6 Rapid Development)...
Start reading Netgear Rbk50 Orbi Ac3000 Tri Band Wifi System User Manual

Related Manuals for Netgear Rbk50 Orbi Ac3000 Tri Band Wifi System User Manual

All Netgear manuals