Netgear R9000 Nighthawk X10 Smart Wifi Router User Manual

							For information about viewing the status of the Ethernet port aggregation, see View Ethernet Port
Aggregation Status on page 71.
View Ethernet Port Aggregation Status
You can view the status of Ethernet aggregation for a device that is connected to the router's designated
Ethernet aggregation ports.The device must support Ethernet aggregation.
To view the status of the Ethernet port aggregation:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Advanced Setup > Ethernet Port Aggregation.
The Ethernet Port Aggregation page displays.
The Ethernet port aggregation status displays on the page.
Network Settings
71
Nighthawk X10 AD7200 Smart WiFi Router 
						

							6
Optimize Performance
You can set up the router to optimize performance for applications such as Internet gaming, high-definition video
streaming, and VoIP communication. By default, the router uses Wi-Fi Multimedia Quality of Service (WMM
QoS).
This chapter contains the following sections:
•Improve Network Connections With Universal Plug and Play on page 73
•Wi-Fi Multimedia Quality of Service on page 74
72 
						

							Improve Network Connections With Universal Plug and
Play
Universal Plug and Play (UPnP) helps devices such as Internet appliances and computers access the
network and connect to other devices as needed. UPnP devices can automatically discover the services
from other registered UPnP devices on the network.
If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time communications
such as instant messaging or remote assistance (a feature in Windows XP), enable UPnP.
To enable Universal Plug and Play:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net.
A login window opens.
3.Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Advanced Setup > UPnP.
The UPnP page displays.
5.Select the Turn UPnP On check box.
By default, this check box is selected. UPnP for automatic device configuration can be enabled or
disabled. If the Turn UPnP On check box is cleared, the router does not allow any device to automatically
control router resources, such as port forwarding.
6.Type the advertisement period in minutes.
The advertisement period specifies how often the router broadcasts its UPnP information.This value
can range from 1 to 1440 minutes.The default period is 30 minutes. Shorter durations ensure that
control points receive current device status at the expense of more network traffic. Longer durations
can compromise the freshness of the device status but can significantly reduce network traffic.
7.Type the advertisement time to live in hops.
The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops
are the steps a packet takes between routers.The number of hops can range from 1 to 255.The default
value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you
notice that some devices are not being updated or reached correctly, it might be necessary to increase
this value.
8.Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the router
and which ports (internal and external) that device opened.The UPnP Portmap Table also displays
what type of port is open and whether that port is still active for each IP address.
To refresh the information in the UPnP Portmap Table, click the Refresh button.
Optimize Performance
73
Nighthawk X10 AD7200 Smart WiFi Router 
						

							Wi-Fi Multimedia Quality of Service
Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes WiFi voice and video traffic over the WiFi link.
WMM QoS is automatically enabled for the modem router.
WMM QoS prioritizes WiFi data packets from different applications based on four access categories: voice,
video, best effort, and background. For an application to receive the benefits of WMM QoS, WMM must be
enabled for both it and the client running that application. Legacy applications that do not support WMM
and applications that do not require QoS are assigned to the best effort category, which receives a lower
priority than voice and video.
We do not recommend that you disable the WMM settings.Note
To disable the WMM settings:
1.Launch an Internet browser from a computer or WiFi device that is connected to the network.
2.Enter http://www.routerlogin.net.
A login window opens.
3.Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Setup > QoS Setup.
The Quality of Service page displays.
5.Clear the Enable WMM (Wi-Fi multimedia) settings (2.4 GHz b/g/n) check box.
6.Clear the Enable WMM (Wi-Fi multimedia) settings (5 GHz a/n/ac) check box.
7.Click the Apply button.
Your settings are saved.
Optimize Performance
74
Nighthawk X10 AD7200 Smart WiFi Router 
						

							7
Manage Your Network
This chapter describes the router settings for administering and maintaining your router and home network.
The chapter includes the following sections:
•Update the Router Firmware on page 76
•Change the admin Password and Enable Password Recovery on page 77
•Set Up Password Recovery on page 78
•Recover the admin Password on page 79
•View Router Status on page 79
•Display Internet Port Statistics on page 80
•Check the Internet Connection Status on page 81
•View and Manage Logs of Router Activity on page 82
•View Devices Currently on the Network on page 83
•Monitor Internet Traffic on page 84
•Manage the Router Configuration File on page 85
•Remote Access on page 87
•Remotely Access Your Router Using the genie App on page 88
75 
						

							Update the Router Firmware
You can log in to the router and check if new firmware is available, or you can manually load a specific
firmware version to your router.
Check for New Firmware and Update the Router
The router firmware (routing software) is stored in flash memory.You might see a message at the top of
the router pages when new firmware is available.You can respond to that message to update the firmware
or you can check to see if new firmware is available and update your product.
We recoommend that you connect a computer to the router using an Ethernet
connection to update the firmware.
Note
To check for new firmware and update your router:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net in the address field.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Administration > Firmware Update.
The Firmware Update page displays.
5.Click the Check button.
The router finds new firmware information if any is available and displays a message asking if you want
to download and install it.
6.Click the Yes button.
The router locates and downloads the firmware and begins the update.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the update. For
example, do not close the browser, click a link, or load a new page. Do not
turn off the router.
When the upload is complete, your router restarts.The update process typically takes about one minute.
Read the new firmware release notes to find out if you must reconfigure the router after updating.
Manage Your Network
76
Nighthawk X10 AD7200 Smart WiFi Router 
						

							Manually Upload Firmware to the Router
If you want to upload a specific firmware version, or your router fails to update its firmware automatically,
follow these instructions.
We recoommend that you connect a computer to the router using an Ethernet
connection to upload the firmware.
Note
To manually upload a firmware file to your router:
1.Download the firmware for your router from the NETGEAR Download Center, save it to your desktop,
and unzip the file if needed.
The correct firmware file uses an .img or .chk extension.Note
2.Launch a web browser from a computer or mobile device that is connected to the network using an
Ethernet connection..
3.Enter http://www.routerlogin.net in the address field.
A login window opens.
4.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
5.Select ADVANCED > Administration > Firmware Update.
The Firmware Update page displays.
6.Click the Browse button.
7.Find and select the saved firmware on your computer.
Do not interrupt this process as it might cause corruption, which will make your router
unusable.Your router reboots after the firmware is uploaded. If your router does not
reboot, check the Router Status page to confirm whether the new firmware version
uploaded.
Note
Change the admin Password and Enable Password
Recovery
You can change the default password that is used to log in to the router with the user name admin.This
password is not the one that you use for WiFi access.
Manage Your Network
77
Nighthawk X10 AD7200 Smart WiFi Router 
						

							Be sure to change the password for the user name admin to a secure password.The
ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
Note
To change the admin user name and enable password recovery:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net in the address field.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5.Type the old password in the Old Password field.
6.Type the new password in the Set Password and Repeat New Password fields.
7.To be able to recover the password, select the Enable Password Recovery check box and answer
two security questions..
We recommend that you enable password recovery.
8.Click the Apply button.
Your settings are saved.
Set Up Password Recovery
We recommend that you enable password recovery if you change the password for the router user name
admin.Then you can recover the password if it is forgotten.This recovery process is supported in Internet
Explorer, Firefox, and Chrome browsers but not in the Safari browser.
To set up password recovery:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net in the address field.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Administration > Set Password.
The Set Password page displays.
Manage Your Network
78
Nighthawk X10 AD7200 Smart WiFi Router 
						

							5.Select the Enable Password Recovery check box.
6.Select two security questions and provide answers to them.
7.Click the Apply button.
Your settings are saved.
Recover the admin Password
To recover your password:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net in the address field.
A login window opens.
3.Click the Cancel button.
If password recovery is enabled, you are prompted to enter the serial number of the router.
The serial number is on the label on the router.
4.Enter the serial number of the router.
5.Click the Continue button.
A window opens requesting the answers to your security questions.
6.Enter the saved answers to your security questions.
7.Click the Continue button.
A window opens and displays your recovered password.
8.Click the Login again button.
A login window opens.
9.With your recovered password, log in to the router.
View Router Status
To view the router status and usage information:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net in the address field.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
Manage Your Network
79
Nighthawk X10 AD7200 Smart WiFi Router 
						

							The BASIC Home page displays.
4.Click the ADVANCED tab.
Your router might display information that is different from this example. If your router is set up to lease
an intranet address from your Internet service provider (ISP), the Internet Port pane displays the IP
Address, Connection, and Subnet Mask intranet values in parentheses.
Display Internet Port Statistics
To display Internet port statistics:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net in the address field.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Click the ADVANCED tab.
The ADVANCED Home page displays.
Manage Your Network
80
Nighthawk X10 AD7200 Smart WiFi Router