Netgear R9000 Nighthawk X10 Smart Wifi Router User Manual
Have a look at the manual Netgear R9000 Nighthawk X10 Smart Wifi Router User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Access a Storage Device Connected to the Router From a Windows Computer To access the USB storage device from a Windows computer: 1.Connect a USB storage device to a USB port on your router. If your USB storage device uses a power supply, you must use it when you connect the USB storage device to the router. When you connect the USB storage device to the router’s port, it might take up to two minutes before it is ready for sharing. By default, the USB storage device is available to all computers on your local area network (LAN). 2.Select Start > Run. 3.Enter \ eadyshare in the dialog box. 4.Click the OK button. A window automatically opens and displays the files and folders on the USB storage device. Map a USB Device to a Windows Network Drive To map the USB storage device to a Windows network drive: 1.Connect a USB storage device to a USB port on the router. If your USB storage device uses a power supply, you must use it when you connect the device to the router. When you connect the USB storage device to the router’s port, it might take up to two minutes before it is ready for sharing. By default, the device is available to all computers on your local area network (LAN). 2.Select Start > Run. 3.Enter \ eadyshare in the dialog box. 4.Click the OK button. 5.Right-click the USB device and select Map network drive. 6.Select the drive letter to map to the new network folder. 7.Click the Finish button. The USB storage device is mapped to the drive letter that you specified. 8.To connect to the USB storage device as a different user, select the Connect using different credentials check box, click the Finish button, and do the following: a.Type the user name and password. b.Click the OK button. Share USB Storage Devices Attached to the Router 91 Nighthawk X10 AD7200 Smart WiFi Router
The USB storage device is mapped to the drive letter that you specified. Access a Storage Device That Is Connected to the Router From a Mac From a computer or device on the network, you can access a storage device that is connected to the router. To access the device from a Mac: 1.Connect a USB storage device to a USB port on your router. If your USB storage device uses a power supply, you must use it when you connect the USB storage device to the router. When you connect the USB storage device to the router’s port, it might take up to two minutes before it is ready for sharing. By default, the USB storage device is available to all computers on your local area network (LAN). 2.On a Mac that is connected to the network, select Go > Connect to Server. 3.In the Server Address field, enter smb://readyshare. 4.When prompted, select the Guest radio button. If you set up access control on the router and you allowed your Mac to access the network, select the Registered User radio button and enter admin for the name and password for the password. For more information about access control, see View Devices Currently on the Network on page 83. 5.Click the Connect button. A window automatically opens and displays the files and folders on the USB storage device. Back Up Windows Computers With ReadySHARE Vault Your router comes with free backup software for all the Windows computers in your home. Connect a USB hard disk drive (HDD) to the router for centralized, continuous, and automatic backup. The following operating systems support ReadySHARE Vault: •Windows XP SP3 •Windows 7 •Windows 8 •Windows 8.1 •Windows 10 To back up your Windows computer: 1.Connect a USB HDD storage device to a USB port on the router. 2.If your USB storage device uses a power supply, connect it. You must use the power supply when you connect the USB storage device to the router. Share USB Storage Devices Attached to the Router 92 Nighthawk X10 AD7200 Smart WiFi Router
When you connect the USB storage device to the router's USB port, it might take up to two minutes before it is ready for sharing. By default, the USB storage device is available to all computers on your local area network (LAN). 3.Download ReadySHARE Vault from netgear.com/readyshare and install it on each Windows computer. 4.Launch ReadySHARE Vault. 5.Use the dashboard or the Backup tab to set up and run your backup. Back Up Mac Computers With Time Machine You can use Time Machine to back up your Mac computers onto a USB hard drive that is connected to one of the router’s USB ports.You can access the connected storage device from your Mac with a wired or WiFi connection to your router. Set Up a USB Hard Drive on a Mac We recommend that you use a new USB HDD or format your old USB HDD to do the Time Machine backup for the first time. Use a blank partition to prevent some issues during backup using Time Machine.The router supports GUID or MBR partitions. To format your USB hard disk drive and specify partitions: 1.Physically connect the USB hard drive to your router. 2.On your Mac, go to Spotlight (or the magnifying glass) at the top right of the page and search for Disk Utility. 3.Open the Disk Utility, select your USB HDD, click the Erase tab, and click the Erase button. 4.Click the Partition tab. 5.In the Partition Layout menu, set the number of partitions that you want to use. 6.Click the Options button. The Partition schemes display. 7.Select the GUID Partition Table or Master Boot Record radio button. 8.In the Format menu, select Mac OS Extended (Journaled). 9.Click the OK button. 10.Click the Apply button. Your settings are saved. Prepare to Back Up a Large Amount of Data Before you back up a large amount of data with Time Machine, NETGEAR recommends that you follow this procedure. Share USB Storage Devices Attached to the Router 93 Nighthawk X10 AD7200 Smart WiFi Router
To prepare to back up a large amount of data: 1.Upgrade the operating system of the Mac computer. 2.Verify and repair the backup disk and the local disk. 3.Verify and repair the permissions on the local disk. 4.Set Energy Saver: a.From the Apple menu, select System Preferences. The System Preferences window displays. b.Select Energy Saver. The Energy Saver page displays. c.Click the Power Adapter tab. d.Select the Wake for Wi-Fi network access check box. e.Click the back arrow to save the changes and exit the screen. 5.Modify your security settings: a.From the System Preferences window, select Security & Privacy. The Security & Privacy page displays. b.Click the Advanced button at the bottom of the page. If the Advanced button is grayed out, click the lock icon so that you can change the settings. c.Clear the Log out after minutes of inactivity check box. d.Click the OK button. Your settings are saved. Use Time Machine to Back Up Onto a USB Hard Disk You can use Time Machine to back up your Mac computers onto a USB hard disk drive (HDD) that is connected to one of the router’s USB ports. To back up your Mac onto a USB hard disk drive: 1.Prepare your USB device with a compatible format and partitions. For more information, see Set Up a USB Hard Drive on a Mac on page 93. 2.If you plan to back up a large amount of data, see Prepare to Back Up a Large Amount of Data on page 93. 3.Connect your USB HDD to a USB port on the router. If your USB HDD uses a power supply, you must use it when you connect the USB HDD to the router. When you connect the USB HDD to the router, it might take up to two minutes before it is ready for sharing. By default, the USB HDD is available to all computers on your local area network (LAN). 4.On a Mac computer that is connected to the network, launch Finder and select Go > Connect to Server. The Connect to Server window displays. Share USB Storage Devices Attached to the Router 94 Nighthawk X10 AD7200 Smart WiFi Router
5.Type smb://routerlogin.net and click the Connect button. 6.When prompted, select the Registered User radio button. 7.Enter admin for the name and password for the password and click the Connect button. A list of USB devices connected to your router displays. 8.From the Apple menu, select System Preferences. The System Preferences window displays. 9.Select Time Machine. The Time Machine window displays. 10.Click the Select Backup Disk button and select your USB HDD from the list. 11.Click the Use Disk button. If you do not see the USB partition that you want in the Time Machine disk list, go to Mac Finder and click that USB partition. It displays in the Time Machine list. Note 12.When prompted, select the Registered User radio button. 13.Enter admin for the name and password for the password and click the Connect button. When the setup is complete, the Mac automatically schedules a full backup.You can back up immediately if you want. Install and Back Up Files to Amazon Drive Your router allows you to back up your media files to Amazon Drive. Amazon Drive is a cloud storage application that allows you to remotely store, back up, and share media files. In the United States, NETGEAR offers a promotion code for a free three-month trial of Amazon Drive. For more information about Amazon Drive, visit https://www.amazon.com/clouddrive/home. To install and back up your USB storage device to Amzaon Drive: 1.Connect your USB storage device to a USB port on your router. If your USB storage device uses a power supply, you must use it when you connect the USB storage device to the router. When you connect the USB storage device to the router’s port, it might take up to two minutes before it is ready for sharing. By default, the USB storage device is available to all computers on your local area network (LAN). 2.Launch a web browser from a computer or mobile device that is connected to the network. 3.Enter http://www.routerlogin.net. A login window opens. 4.Enter the router user name and password. The user name is admin.The default password is password.The user name and password are case-sensitive. Share USB Storage Devices Attached to the Router 95 Nighthawk X10 AD7200 Smart WiFi Router
The BASIC Home page displays. 5.Select Cloud Backup. The Cloud Backup page displays. 6.If you do not have an Amazon account, click the new user’s link on the page to sign up for a three-month free trial of Amazon Drive. A link to for a promotion code for a three-month free trial is also on the page. Use the promotion code at checkout. 7.If you already have an Amazon account, click the existing user’s link on the page. An Amazon sign in windows opens. 8.Enter your Amazon account credentials and sign in. Amazon’s Terms of Use display. 9.Click the OK button. A success page displays.You are redirected back to the router’s user interface where you will see that your Amazon account is added to the Cloud Backup page. 10.Click the Select Folder link. A window opens that displays the folders on your USB storage device. 11.Select a folder on your USB storage device that you want to back up to your Amazon Cloud account and click the OK button. The folder is added and becked up to your Amazon Cloud account. 12.(Optional) Set up a backup schedule: •Real-time sync.The default backup schedule is real-time sync, which means that whenever the data on your USB device changes, it is backed up to cloud in real time. •Backup on schedule. Back up on schedule means that you can select the day and time to back up your data to the cloud. 13.Click the Apply button. Your settings are saved. Use FTP Within the Network File Transfer Protocol (FTP) lets you send and receive large files faster. To set up FTP access: 1.Launch a web browser from a computer or mobile device that is connected to the network. 2.Enter http://www.routerlogin.net. A login window opens. 3.Enter the router user name and password. The user name is admin.The default password is password.The user name and password are case-sensitive. Share USB Storage Devices Attached to the Router 96 Nighthawk X10 AD7200 Smart WiFi Router
The BASIC Home page displays. 4.Select ADVANCED > ReadySHARE > ReadySHARE Storage > Advanced Settings. The USB Storage (Advanced Settings) page displays. 5.Select the FTP check box. 6.Click the Apply button. Your settings are saved. View or Change Network Folders on a Storage Device You can view or change the network folders on a storage device connected to the router. To view or change network folders: 1.Launch a web browser from a computer or mobile device that is connected to the network. 2.Enter http://www.routerlogin.net. A login window opens. 3.Enter the router user name and password. The user name is admin.The default password is password.The user name and password are case-sensitive. The BASIC Home page displays. 4.Select ADVANCED > ReadySHARE > ReadySHARE Storage > Advanced Settings. The USB Storage (Advanced Settings) page displays. 5.Scroll down to the Available Networks Folder section and adjust the following settings: •Share Name. If only one USB device is connected, the default share name is USB_Storage. You can click the name or you can type it in the address field of your web browser. If Not Shared is shown, the default share was deleted and no other share for the root folder exists. Click the link to change this setting. •Read Access and Write Access. Show the permissions and access controls on the network folder. All–no password (the default) allows all users to access the network folder.The password for admin is the same one that you use to log in to the router. •Folder Name. Full path of the network folder. •Volume Name.Volume name from the storage device. •Total Space and Free Space. Show the current utilization of the storage device. 6.Click the Apply button. Your settings are saved. Share USB Storage Devices Attached to the Router 97 Nighthawk X10 AD7200 Smart WiFi Router
Add a Network Folder on a USB Storage Device You can add network folders on a USB storage device connected to a router USB port. To add a network folder: 1.Launch a web browser from a computer or mobile device that is connected to the network. 2.Enter http://www.routerlogin.net. A login window opens. 3.Enter the router user name and password. The user name is admin.The default password is password.The user name and password are case-sensitive. The BASIC Home page displays. 4.Select ADVANCED > ReadySHARE > ReadySHARE Storage > Advanced Settings. The USB Storage (Advaned Settings) page displays. 5.In the Available Network Folders section, select the USB storage device. 6.Click the Create Network Folder button. The Add Folder window opens. If this window does not open, your web browser might be blocking pop-ups. If it is, change the browser settings to allow pop-ups. 7.Complete the fields. The user name (account name) for All–no password is guest.The password for admin is the same one that is used to log in to the router. By default, it is password. 8.Click the Apply button. The folder is added on the USB storage device. Edit a Network Folder on a USB Storage Device You can edit network folders on a USB storage devices connected to a router USB port. To edit a network folder: 1.Launch a web browser from a computer or mobile device that is connected to the network. 2.Enter http://www.routerlogin.net. A login window opens. 3.Enter the router user name and password. The user name is admin.The default password is password.The user name and password are case-sensitive. The BASIC Home page displays. 4.Select ADVANCED > ReadySHARE > ReadySHARE Storage > Advanced Settings. Share USB Storage Devices Attached to the Router 98 Nighthawk X10 AD7200 Smart WiFi Router
The USB Storage (Advanced Settings) page displays. 5.In the Available Network Folders section, select the USB storage device. 6.Click the Edit button. The Edit Network Folder window opens. 7.Change the settings in the fields as needed. 8.Click the Apply button. Your settings are saved. Set Up NETGEAR Downloader NETGEAR Downloader is a download agent that runs on the router.You can use it to download files onto a USB HDD that is connected to the router so that you do not need to keep the computer running. Download Files Using NETGEAR Downloader To use NETGEAR Downloader to download files: 1.Connect your USB storage device to the router USB port. 2.If your USB device uses a power supply, connect it. You must use the power supply when you connect the USB device to the router. When you connect the USB device to the router USB port, it might take up to two minutes before it is ready for sharing. By default, the USB device is available to all computers on your local area network (LAN). 3.Launch a web browser from a computer or mobile device that is connected to the network. 4.Enter http://www.routerlogin.net. A login window opens. 5.Enter the router user name and password. The user name is admin.The default password is password.The user name and password are case-sensitive. The BASIC Home page displays. 6.Select NETGEAR Downloader (BETA). The Download Manager psge displays. 7.Select the Enable NETGEAR Downloader check box. The page adjusts. 8.From the Download Type menu, select a dowload protocol. The fields change based on which protocol you choose. 9.Complete the fields presented for the option you choose. 10.Click the Add button. The router begins the download. Share USB Storage Devices Attached to the Router 99 Nighthawk X10 AD7200 Smart WiFi Router
11.To display the dowloading status, click the Refresh button. 12.Click the Apply button. Your settings are saved. 13.(Optional) Use the Pause, Resume, and Delete buttons to manage the downloading tasks. The completed downloading tasks display in the Downloaded Files section. Change the NETGEAR Downloader Settings You can change the default save path to any directory on the USB storage device that is connected to the router.You can change the maximum number of concurrent downloading tasks, but NETGEAR recommends 3 as the most effective setting.You can enable autorefresh to see updated downloading tasks, but this might slow down speed of the downloads. To change NETGEAR Downloader settings: 1.Launch a web browser from a computer or mobile device that is connected to the network. 2.Enter http://www.routerlogin.net. A login window opens. 3.Enter the router user name and password. The user name is admin.The default password is password.The user name and password are case-sensitive. The BASIC Home page displays. 4.Select ADVANCED > NETGEAR Downloader (BETA) > Downloader Settings. The NETGEAR Downloader Settigns page displays. 5.Make any needed changes. 6.Click the Apply button. Your settings are saved. Set Up Email Notifications for NETGEAR Downloader The router can email you when a downloader task is finished. To change NETGEAR Downloader settings: 1.Launch a web browser from a computer or mobile device that is connected to the network. 2.Enter http://www.routerlogin.net. A login window opens. 3.Enter the router user name and password. The user name is admin.The default password is password.The user name and password are case-sensitive. The BASIC Home page displays. 4.Select ADVANCED > NETGEAR Downloader (BETA) > Downloader Settings. Share USB Storage Devices Attached to the Router 100 Nighthawk X10 AD7200 Smart WiFi Router