Netgear R9000 Nighthawk X10 Smart Wifi Router User Manual
Here you can view all the pages of manual Netgear R9000 Nighthawk X10 Smart Wifi Router User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 151
Troubleshoot Internet Browsing If your router can obtain an IP address but your computer is unable to load any web pages from the Internet, it might be for the following reasons: •The traffic meter is enabled, and the limit was reached. By configuring the traffic meter not to block Internet access when the traffic limit is reached, you can resume Internet access. If your ISP sets a usage limit, they might charge you for the overage. •Your computer might not recognize any DNS server addresses. A DNS...
Page 152
If your WiFi device finds your network but the signal strength is weak, check these conditions: •Is your router too far from your computer or too close? Place your computer near the router but at least 6 feet (1.8 meters) away and see whether the signal strength improves. •Are objects between the router and your computer blocking the WiFi signal? Troubleshoot Your Network Using the Ping Utility Most network devices and routers contain a ping utility that sends an echo request packet to the designated...
Page 153
Test the Path From Your Computer to a Remote Device To test the path from your computer to a remote device: 1.From the Windows toolbar, click the Start button and select Run. 2.In the Windows Run window, type ping -n 10 where is the IP address of a remote device such as your ISP DNS server. If the path is functioning correctly, messages display that are similar to those shown in Test the LAN Path to Your Router on page 152. 3.If you do not receive replies, check the following: •Check to see that IP...
Page 154
15 Supplemental Information This chapter includes technical information about your router. The chapter covers the following topics: •Factory Settings on page 155 •Technical Specifications on page 156 154
Page 155
Factory Settings You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least seven seconds.The router resets and returns to the factory configuration settings shown in the following table. Table 3. Factory default settings Default settingFeature www.routerlogin.com or www.routerlogin.netUser login URLRouter login adminUser name (case-sensitive) passwordLogin password (case-sensitive) Use...
Page 156
Table 3. Factory default settings (Continued) Default settingFeature EnabledWireless communicationWireless See router labelSSID name WPA2-PSK (AES)Security EnabledBroadcast SSID Auto1Transmission speed United States in the US; otherwise, varies by regionCountry/region Auto for 2.4 GHz, CH 44 for WW SKU, and CH 153 for North America SKU RF channel Up to 800 Mbps at 2.4 GHz, 1773 Mbps at 5 GHz, 4.6 Gpbs at 60 GHz Operating mode 1Maximum wireless signal rate derived from IEEE Standard 802.11 specifications....
Page 157
Table 4. Router specifications (Continued) DescriptionFeature FCC Part 15 Class B EN 55022 (CISPR 22), Class B C-Tick N10947 Electromagnetic emissions 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45LAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45WAN 10G SFP+ LAN port Maximum WiFi signal rate complies with the IEEE 802.11 standard.2Wireless Auto Rate SensingRadio data rates •IEEE® 802.11b/g/n 2.4 GHz 256 QAM support •IEEE 802.11a/n/ac 5.0 GHz 256 QAM support •IEEE 802.11ad 60 GHz Data encoding standards...