Netgear R7000 Nighthawk Ac1900 Smart Wifi Router User Manual

							21
3
3.   Specify Your Internet Settings
Usually, the quickest way to set up the router to use your Internet connection is to allow the genie 
to detect the Internet connection when you first access the router with a web browser. You can 
also customize or specify your Internet settings. 
This chapter contains the following sections:
•Use the Internet Setup Wizard 
•Manually Set Up the Internet Connection 
•Specify IPv6 Internet Connections 
•Change the MTU Size 
•Enable the Bridge or Add a VLAN Tag Group  
						

							Specify Your Internet Settings 22
Nighthawk AC1900
 Smart  WiFi Router 
Use the Internet Setup Wizard
You can use the Setup Wizard to detect your Internet settings and automat\
ically set up your 
router. The Setup Wizard is not the same as the genie pages that display the fir\
st time you 
connect to your router to set it up.
To use the Setup Wizard:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  Enter  http://www
 .routerlogin.net.
A login window displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home page displays. 
4.  Select  ADV
 ANCED > Setup Wizard . 
5. Select the  Ye s radio button. 
If you select No, you are taken to the Internet Setup page (see Manually Set Up the 
Internet Connection ). 
6.  Click the  Next button. 
						

							Specify Your Internet Settings 23
 Nighthawk AC1900
 Smart WiFi Router
The Setup Wizard searches your Internet connection for servers and proto\
cols to 
determine your ISP configuration and checks your operation mode.  
						

							Specify Your Internet Settings 24
Nighthawk AC1900
 Smart  WiFi Router 
Manually Set Up the Internet Connection
You can view or change the router’s Internet connection settings.
Specify an Internet Connection Without a Login
To specify the Internet connection settings:
1. Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  Enter  http://www
 .routerlogin.net.
A login window displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  Internet .
Scroll to 
view more 
settings
5. For the Does your Internet connection require a login  setting, leave the No radio 
button selected.
6.  If your Internet connection requires an account name or host name, type \
it in the  Account 
Name (If Required) field. 
						

							Specify Your Internet Settings 
25  Nighthawk AC1900 Smart WiFi Router
7. If your Internet connection requires a domain name, type it in the Domain Name (If 
Required) field. 
For the other sections in this page, the default settings usually work, but you can change 
them.
8. For the Internet IP Address setting, select one of the following radio buttons:
•Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP 
automatically assigns these addresses.
•Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP 
address that your ISP assigned. The gateway is the ISP router to which your router 
connects.
9. For the Domain Name Server (DNS) Address setting, select one of the following radio 
buttons:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your 
ISP automatically assigns this address. 
•Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary 
DNS server address is available, enter it also. 
10. For the Router MAC Address setting, select one of the following radio buttons:
•Use Default Address. Use the default MAC address.
•Use Computer MAC Address. The router captures and uses the MAC address of the 
computer that you are now using. You must use the one computer that the ISP allows.
•Use This MAC Address. Enter the MAC address that you want to use.
11. Click the Apply button.
Your settings are saved.
12. Click the Test button to test your Internet connection. 
If the NETGEAR website does not display within one minute, see Chapter 14, 
Troubleshooting.
Specify an Internet Connection That Uses a Login
To view or change the basic Internet setup:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays. 
						

							Specify Your Internet Settings 26
Nighthawk AC1900
 Smart  WiFi Router 
4. Select  Internet .
Scroll to 
view more 
settings
5. In the  Does your Internet connection require a login  section of the page, select the 
Ye s  radio button.
The page adjusts.
6.  In the Internet Service Provider list, select the encapsulation method  PPPoE, PPTP, or 
L2TP .
7.  In the Login field, enter the login name your ISP gave you. 
 This login name is often an email 
address.
8.  In the Password field, type the password that you use to log in to your Internet servic\
e. 
9.  If your ISP requires a service name, type it in the Service Name (if Required)  field.
10.  In the  Connection Mode  drop-down list, select  Always 
 On, Dial on Demand, or Manually 
Connect.
11.  T
o change the number of minutes until the Internet login times, out, in t\
he  Idle Timeout (In 
minutes) field, type the number of minutes.
This is how long the router keeps the Internet connection active when no\
 one on the  network is using the Internet connection. 
 A value of 0 (zero) means never log out.
12.  In the  Internet IP 
 Address section, select one of the following radio buttons:
• Get Dynamically from ISP . 
 Your ISP uses DHCP to assign your IP address. Your ISP 
automatically assigns these addresses.
• Use Static IP 
 Address. Enter the IP address, IP subnet mask, and the gateway IP 
address that your ISP assigned. The gateway is the ISP router to which your router 
connects. 
						

							Specify Your Internet Settings 
27  Nighthawk AC1900 Smart WiFi Router
13. In the Domain Name Server (DNS) Address section, select one of the following radio 
buttons:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your 
ISP automatically assigns this address. 
•Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary 
DNS server address is available, enter it also. 
14. In the Router MAC Address section of the page, select one of the following radio buttons:
•Use Default Address. Use the default MAC address.
•Use Computer MAC Address. The router captures and uses the MAC address of the 
computer that you are now using. You must use the one computer that the ISP allows.
•Use This MAC Address. Enter the MAC address that you want to use.
15. Click the Apply button.
Your settings are saved.
16. Click the Test button to test your Internet connection. 
If the NETGEAR website does not display within one minute, see Chapter 14, 
Troubleshooting.
Specify IPv6 Internet Connections
You can set up an IPv6 Internet connection if genie does not detect it automatically.
To set up an IPv6 Internet connection:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. In the Internet Connection Type list, select the IPv6 connection type. 
Your Internet service provider (ISP) can provide this information.
•If your ISP did not provide details, select IPv6 Tunnel. 
•If you are not sure, select Auto Detect so that the router detects the IPv6 type that is 
in use.  
						

							Specify Your Internet Settings 
28 Nighthawk AC1900 Smart WiFi Router 
•If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select 
Auto Config. For more information about IPv6 Internet connection, see the following 
sections.
Your Internet service provider (ISP) can provide this information. For more information 
about IPv6 Internet connection, see the following sections:
-Use Auto Detect for an IPv6 Internet Connection on page 28
-Use Auto Config for an IPV6 Internet Connection on page 29
-Set Up an IPv6 6rd Tunnel Internet Connection on page 31
-Set Up an IPv6 6to4 Tunnel Internet Connection on page 33
-Set Up an IPv6 Pass Through Internet Connection on page 35
-Set Up an IPv6 Fixed Internet Connection on page 35
-Set Up an IPv6 DHCP Internet Connection on page 37
-Set Up an IPv6 PPPoE Internet Connection on page 38
6. Click the Apply button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by 
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero 
or omit it. The following errors invalidate an IPv6 address:
•More than eight groups of hexadecimal quartets
•More than four hexadecimal characters in a quartet
•More than two colons in a row
Use Auto Detect for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto detection:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays. 
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays. 
						

							Specify Your Internet Settings 29
 Nighthawk AC1900
 Smart WiFi Router
5. In the Internet Connection Type  list, select Auto Detect .
The page adjusts:
The router automatically detects the information in the following fields\
:
• Connection T
 ype. This field indicates the connection type that is detected.
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the \
IPv6 address. If no 
address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. I\
f no address is 
acquired, the field displays Not Available.
6.  Specify how the router assigns IPv6 addresses to the devices on your hom\
e network (the 
LAN) by selecting one of the following radio buttons:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
7.  (Optional) Select the Use This Interface ID check box and specify the interface ID to be 
used for the IPv6 address of the router’

s LAN interface.
If you do not specify an ID here, the router generates one automatically\
 from its MAC 
address.
8.  Click the  Apply button.
Your settings are saved.
Use Auto Config for an IPV6 Internet Connection
To set up an IPv6 Internet connection through auto configuration:
1.  Launch a web browser from a computer or WiFi device that is connected to\
 the network.
2.  Enter  http://www
 .routerlogin.net. 
						

							Specify Your Internet Settings 30
Nighthawk AC1900
 Smart  WiFi Router 
A login window displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5.  In the Internet Connection T
 ype list, select Auto Config.
The page adjusts:
The router automatically detects the information in the following fields\
:
• Router
’s IPv6 Address on WAN . This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the \
IPv6 address. If no 
address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN . This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. I\
f no address is 
acquired, the field displays Not Available.
6.  Select an IPv6 Domain Name Server (DNS) 
 Address radio button:
• Get Automatically 
 from ISP. Your ISP uses DHCP to assign your DNS servers. Your 
ISP automatically assigns this address.
• Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’

s primary DNS server. If a secondary 
DNS server address is available, enter it also.
7.  (Optional) In the DHCP User Class (If Required) field, enter a host name.