Netgear R7000 Nighthawk Ac1900 Smart Wifi Router User Manual

							191
A
A.   Supplemental Information
This appendix covers the following topics: 
•Factory Settings 
•Technical Specifications  
						

							 Supplemental Information
192 Nighthawk AC1900 Smart WiFi Router 
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object 
to press and hold the Reset button on the back of the router for at least seven seconds. The 
router resets, and returns to the factory configuration settings shown in the following table.
Table 3.  Factory default settings  
FeatureDefault behavior
Router loginUser login URLwww.routerlogin.com or www.routerlogin.net
User name (case-sensitive)admin 
Login password (case-sensitive)password
Internet 
connectionWAN MAC addressUse default hardware address
WAN MTU size1500
Port speedAutoSensing
Local network 
(LAN)LAN IP192.168.1.1
Subnet mask255.255.255.0
DHCP serverEnabled
DHCP range192.168.1.2 to 192.168.1.254
Time zonePacific time
DHCP starting IP address192.168.1.2
DHCP ending IP address192.168.1.254
DMZDisabled
Time zoneGMT for WW except NA and GR, GMT+1 for GR, GMT-8 
for NA
Time zone adjusted for daylight 
savings timeDisabled
SNMPDisabled
FirewallInbound (communications coming 
in from the Internet)Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going 
out to the Internet)Enabled (all)
Source MAC filteringDisabled 
						

							 Supplemental Information
193  Nighthawk AC1900 Smart WiFi Router
WirelessWireless communicationEnabled
SSID nameSee router label
SecurityWPA2-PSK (AES)
Broadcast SSIDEnabled
Transmission speedAuto*
Country/regionUnited States in the US; otherwise varies by region
RF channel6 until region selected
Operating modeUp to 600 Mbps at 2.4 GHz, 1300 Mbps at 5 GHz
*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network 
conditions and environmental factors, including volume of network traffic, building materials and construction, and network 
overhead, lower actual data throughput rate.
Table 3.  Factory default settings  (continued)
FeatureDefault behavior 
						

							 Supplemental Information194
Nighthawk AC1900
 Smart  WiFi Router 
Technical Specifications
Table 4.  R7000 Router specifications  
FeatureDescription
Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, 
and SMB
Power adapter • North America: 
 120V,  60  Hz,  input
•  UK, 
Australia: 240V, 50 Hz, input
• Europe: 230V
 , 50 Hz, input
•  All regions (output): 12V/3.5A DC output
Dimensions  Dimensions: 280 mm x 182 mm x 49 mm (11 in. x 7.17 in. x 1.9 in.) 
Weight  Weight: 430 g (0.94 lbs)
Operating temperature 0° to 40° C   (32º to 104º F)
Operating humidity 90% maximum relative humidity, noncondensing
Electromagnetic emissions FCC Part 15 Class B
VCCI Class B
EN 55 022 (CISPR 22), Class B C-Tick N10947
LAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
WAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the 
footnote for the previous table. 
Radio data rates Auto Rate Sensing
Data encoding standards IEEE 802.11ac 2.0
IEEE 802.11n version 2.0
IEEE 802.11n 256QAM IEEE 802.11g, IEEE 802.11b 2.4 GHz  
IEEE 802.11n, IEEE 802.11a 5.0 GHz
Maximum computers per 
wireless network Limited by the amount of wireless network traffic generated by each node 
(typically 50–70 nodes).
Operating frequency range 2.4 GHz
2.412–2.462 GHz (US) 
2.412–2.472 GHz (Japan)  
2.412–2.472 GHz (Europe ETSI)
5 GHz 5.18–5.24 + 5.745–5.825 GHz (US) 
5.18–5.24 GHz (Europe ETSI)
802.11 security WPA-PSK, WPA2-PSK, and WPA/WPA2