Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Set Up Virtual Private Networking with SSL Connections 
459  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the List of Configured Applications for Port Forwarding table, to the right of the host 
name that you want to remove, click the corresponding Delete button.
The IP address and port number are removed from the List of Configured Applications for 
Port Forwarding table.
Configure the SSL VPN Client
The following sections provide information about configuring SSL VPN clients:
•SSL VPN...

Set Up Virtual Private Networking with SSL Connections 
460 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•If you enable split-tunnel support and you assign an entirely different subnet to the VPN 
tunnel clients from the subnet that is used by the local network, you must add a client 
route to ensure that a VPN tunnel client connects to the local network over the VPN 
tunnel.
Configure the Client IPv4 Address Range
The following procedure describes how to define the client IPv4 address...

Set Up Virtual Private Networking with SSL Connections 
461  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the Client IP Address Range section, enter the settings as described in the following table.
8. Click the Apply button.
SettingDescription
Enable Full Tunnel Support Select this check box to enable full-tunnel support. Full tunnel support 
provides clients access to the entire LAN network.
If you leave this check box cleared (which is the default setting), full-tunnel 
support is...

Set Up Virtual Private Networking with SSL Connections 
462 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Your settings are saved. VPN tunnel clients are now able to connect to the VPN firewall 
and receive a virtual IPv4 address in the client address range.
Add an IPv4 Route for VPN Tunnel Clients
If the assigned client IPv4 address range is in a different subnet from the local network, or if 
the local network has multiple subnets, or if you select split-tunnel operation, you must define...

Set Up Virtual Private Networking with SSL Connections 
463  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the Add Routes for VPN Tunnel Clients section, complete the following fields:
•Destination Network. The IPv4 address of the local destination network or subnet 
that provides access to one or more port forwarding applications and services.
•Subnet Mask. The subnet mask for the local destination or subnet.
8. Click the Add button.
The new client route is added to the Configured Client...

Set Up Virtual Private Networking with SSL Connections 
464 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave...

Set Up Virtual Private Networking with SSL Connections 
465  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. In the Client IP Address Range section, enter the settings as described in the following table.
9. Click the Apply button.
Your settings are saved. VPN tunnel clients are now able to connect to the VPN firewall 
and receive a virtual IPv6 address in the client address range.
Add an IPv6 Route for VPN Tunnel Clients
If the assigned client IPv6 address range is different from the local...

Set Up Virtual Private Networking with SSL Connections 
466 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
7. In the upper right, select the IPv6 radio button.
The SSL VPN Client screen displays the IPv6 settings. The following figure shows 
examples.
8. In the Add Routes for VPN Tunnel Clients section, complete the following fields:
•Destination Network. The IPv6 address of the local destination network that 
provides access to one or more port forwarding applications and services.
•Prefix...

Set Up Virtual Private Networking with SSL Connections 
467  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative...

Set Up Virtual Private Networking with SSL Connections 
468 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Defining network resources is optional; smaller organizations can choose to create access 
policies using individual IP addresses or IP networks rather than predefined network 
resources. But for most organizations, NETGEAR recommends that you use network 
resources. If your server or network configuration changes, you can perform an update 
quickly by using network resources instead of...