Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Set Up Virtual Private Networking With IPSec Connections 
419  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. Enter the settings as described in the following table.
8. Click the Apply button.
Your settings are saved.
SettingDescription
PPTP Server
Enable To enable the PPTP server, select the Enable check box.
Start IP Address Type the first IP address of the address pool.
End IP Address Type the last IP address of the address pool. A maximum of 26 contiguous 
addresses can be part of the...

Set Up Virtual Private Networking With IPSec Connections 
420 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
View the Active PPTP Users and Disconnect Active Users
The following procedure describes how to view all active PPTP users and disconnect active 
PPTP users. 
To view all active PPTP users and disconnect active PPTP users:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the...

Set Up Virtual Private Networking With IPSec Connections 
421  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. To disable an active PPTP user, in the List of PPTP Active Users table, click the 
corresponding Disconnect button.
The user is disconnected.
8. To disable another active PPTP user, repeat Step 7.
Manage the L2TP Server
The following sections provide information about how to manage the L2TP server:
•L2TP Servers Overview
•Enable and Configure the L2TP Server
•View the Active L2TP...

Set Up Virtual Private Networking With IPSec Connections 
422 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
To enable the L2TP server and configure the L2TP server pool:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field,...

Set Up Virtual Private Networking With IPSec Connections 
423  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Click the Apply button.
Your settings are saved.
View the Active L2TP Users and Disconnect Active Users
The following procedure describes how to view all active L2TP users and disconnect active 
L2TP users.
To view all active L2PTP users and disconnect active L2TP users:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address...

Set Up Virtual Private Networking With IPSec Connections 
424 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The List of L2TP Active Users table lists each active connection with the information that 
is described in the following table.
7. To disable an active L2TP user, in the List of L2TP Active Users table, click the 
corresponding Disconnect button.
The user is disconnected.
8. To disable another active L2TP user, repeat Step 7.
ItemDescription
Username The name of the L2TP user that you...

425
9
9.   Set Up Virtual Private Networking 
with SSL Connections
This chapter describes how to use the SSL VPN solution of the VPN firewall to provide remote 
access for mobile users to their corporate resources. The chapter contains the following 
sections:
•SSL VPN Portals Overview
•Build an SSL Portal Using the SSL VPN Wizard
•Access a Custom SSL VPN Portal
•Manually Set Up or Change an SSL Portal 

Set Up Virtual Private Networking with SSL Connections 
426 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
SSL VPN Portals Overview
The following sections provide concept information about the SSL VPN portal:
•SSL VPN Capabilities
•SSL Tunnels
•SSL Port Forwarding
•Build and Access an SSL Portal
SSL VPN Capabilities
The VPN firewall integrates a hardware-based SSL VPN engine that can provide mobile 
users remote access to their corporate resources. With SSL VPN, remote users do not need 
to...

Set Up Virtual Private Networking with SSL Connections 
427  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
•Port forwarding supports only TCP connections, not UDP connections or connections 
using other IP protocols.
•Port forwarding detects and reroutes individual data streams on the user’s computer to 
the port forwarding connection rather than opening up a full tunnel to the corporate 
network.
•Port forwarding offers more fine-grained management than an SSL VPN tunnel. You 
define...

Set Up Virtual Private Networking with SSL Connections 
428 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
SSL VPN Wizard Overview
This section provides an overview of the SSL VPN Wizard. For more information about how 
to set up a portal, see 
Build an SSL Portal with the SSL VPN Wizard on page 429.
The SSL VPN Wizard helps you set up an SSL VPN client connection by guiding you through 
six screens, the last of which lets you save the SSL VPN policy:
•Step 1 of 6. Create the portal layout and...