Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Set Up Virtual Private Networking with SSL Connections 
449  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Create a Portal Layout
The portal layout specifies the login screen that you present to an SSL VPN user and 
determines the type of access that you grant.
To create a portal layout:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory...

Set Up Virtual Private Networking with SSL Connections 
450 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•Description. The banner message that is displayed at the top of the portal.
•Use Count. The number of authentication domains that use the portal.
•Portal URL (IPv4). The IPv4 URL at which the portal can be accessed. The IPv4 
address in the URL is the public WAN address of the VPN firewall (see 
Configure the 
IPv4 Internet Connection and WAN Settings on page 30). 
If you have enabled...

Set Up Virtual Private Networking with SSL Connections 
451  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Click the Apply button.
Your settings are saved. The new portal layout is added to the List of Layouts table. 
For information about how to display the new portal layout, see Access a Custom SSL 
VPN Portal on page 440.
Banner Title The banner title of a banner message that users see before they log in to the 
portal, for example, Welcome to Customer Support.
Note:For an example, see...

Set Up Virtual Private Networking with SSL Connections 
452 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Change a Portal Layout
The following procedure describes how to change an existing portal layout. If you enabled 
IPv6 (see Manage the IPv6 Routing Mode on page
  88), changes that you make to an IPv4 
portal layout are automatically applied to the corresponding IPv6 portal layout, or the other 
way around. For this reason, the following procedure describes how to change an IPv4 portal...

Set Up Virtual Private Networking with SSL Connections 
453  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
on page   88), if you remove an IPv4 portal layout, the corresponding IPv6 portal layout is 
removed automatically, and the other way around. If you remove an IPv6 portal layout, the 
corresponding IPv4 portal is removed automatically. For this reason, the following procedure 
describes the removal of IPv4 portal layouts only.
To remove one or more portal layouts:
1. On your computer,...

Set Up Virtual Private Networking with SSL Connections 
454 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
SSL VPN Port Forwarding Overview
Note:SSL port forwarding does not apply if you configure full VPN tunnel 
capability for an SSL portal. SSL VPN port forwarding is supported for 
IPv4 connections only.
Port forwarding provides access to specific defined network services. To define these 
services, you must specify the internal server addresses and port numbers for TCP 
applications that...

Set Up Virtual Private Networking with SSL Connections 
455  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Add a Server and Port Number for SSL Port Forwarding
To configure port forwarding, you must define the IP addresses of the internal servers and 
the port number for TCP applications and services that are available to remote users. 
To add a server and port number for an SSL port forwarding application or service:
1. On your computer, launch an Internet browser.
2. In the address field of...

Set Up Virtual Private Networking with SSL Connections 
456 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
7. In the Add New Application for Port Forwarding section, complete the following fields:
•IP Address. The IP address of an internal server or host computer on which a service 
or application runs to which you want to grant a remote user access.
•TCP Port. The TCP port number of the service or application that is accessed 
through the SSL VPN tunnel. 
8. In the Add New Application for Port...

Set Up Virtual Private Networking with SSL Connections 
457  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the Add New Host Name for Port Forwarding section, specify information in the following 
fields:
•Local Server IP Address. The IP address of the internal server or host computer that 
you want to name. You can name only IP addresses that are listed in the List of 
Configured Applications for Port Forwarding table.
•Fully Qualified Domain Name. The full name of the internal server or...

Set Up Virtual Private Networking with SSL Connections 
458 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select...