Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Set Up Virtual Private Networking with SSL Connections 
479  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Enter the settings as described in the following table.
10. Click the Apply button.
Your settings are saved. The policy is added to the List of SSL VPN Policies table on the 
Policies screen. The new policy goes into effect immediately.
Add an IPv4 or IPv6 SSL VPN Policy for an IP Network
The following procedure describes how to add an SSL policy for an IP network.
To add an SSL policy...

Set Up Virtual Private Networking with SSL Connections 
480 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave...

Set Up Virtual Private Networking with SSL Connections 
481  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Enter the settings as described in the following table.
10. Click the Apply button.
Your settings are saved. The policy is added to the List of SSL VPN Policies table on the 
Policies screen. The new policy goes into effect immediately.
Add an IPv4 or IPv6 SSL VPN Policy for All Addresses
The following procedure describes how to add an SSL policy for all IP addresses.
To add an SSL...

Set Up Virtual Private Networking with SSL Connections 
482 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative...

Set Up Virtual Private Networking with SSL Connections 
483  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Enter the settings as described in the following table.
10. Click the Apply button.
Your settings are saved. The policy is added to the List of SSL VPN Policies table on the 
Policies screen. The new policy goes into effect immediately.
Change an IPv4 or IPv6 SSL VPN Policy
The following procedure describes how to change an existing SSL policy.
To change an SSL VPN policy:
1. On your...

Set Up Virtual Private Networking with SSL Connections 
484 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select...

Set Up Virtual Private Networking with SSL Connections 
485  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Remove One or More IPv4 or IPV6 SSL VPN Policies
The following procedure describes how to remove an SSL policy that you no longer need.
To remove one or more VPN policies:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP...

486
10
10.   Manage Users, Authentication, and 
VPN Certificates
This chapter describes how to manage users, authentication, and security certificates for IPSec 
VPN and SSL VPN. The chapter contains the following sections:
•VPN Firewall’s Authentication
•Configure Authentication Domains, Groups, and User Accounts
•Manage Digital Certificates for VPN Connections 

Manage Users, Authentication, and VPN Certificates 
487  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
VPN Firewall’s Authentication
Users are assigned to a group, and a group is assigned to a domain. Therefore, first create 
any domains, then groups, then user accounts.
Note:Do not confuse the authentication groups with the LAN groups that 
are described in Manage IPv4 LAN Groups and Hosts on page 132.
You must create name and password accounts for all users who must be able to connect to 
the...

Manage Users, Authentication, and VPN Certificates 
488 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Configure Authentication Domains, Groups, and User 
Accounts
The following sections provide information about configuring authentication domains, groups, 
and user accounts:
•Manage Authentication Domains
•Manage Authentication Groups
•Manage User Accounts
•Manage User Login Policies
•Change Passwords and Automatic Logout Period
Manage Authentication Domains
The following sections provide...