Netgear Dm111pspv2 Adsl2 Plus Ethernet Modem User Manual

Security Settings41
 Broadband ADSL2+ Modem DM111PSPv2
Enable Security Event Email Notification
To receive logs and alerts by email, provide your email information in t\
he Email screen and 
specify which alerts you want to receive and how often. 
To enable email notification:
1. 
Select  Security >  Email to display the following screen:
2. Fill in the fields as follows:
Turn E-mail Notification On . Select this check box if you want to receive email logs and 
alerts from the modem.
Send To This E-mail...

Security Settings
42 Broadband ADSL2+ Modem DM111PSPv2 
Send Logs According to this Schedule. Specifies how often to send the logs: Hourly, 
Daily, Weekly, or When Full. 
Day for sending logs specifies which day of the week to send the log. This is relevant 
when the log is sent weekly.
Time for sending log specifies the time of day to send the log. This is relevant when 
the log is sent daily or weekly.
Note:  If the Weekly, Daily, or Hourly option is selected and the log fills up 
before the specified...

43
4
4.   Network Maintenance
Administering your network
This chapter describes the modem settings for administering and maintaining the modem and 
home network.
This chapter contains the following sections:
•     Upgrade the Modem Firmware 
•     Manually Check for Firmware Upgrades 
•     Manage the Configuration File 
•     View Modem Status 
•     View Attached Devices 
•     Run Diagnostic Utilities  

Network Maintenance44
Broadband ADSL2+ Modem DM111PSPv2 
Upgrade the Modem Firmware
The modem firmware (routing software) is stored in flash memory. By de\
fault, when you log in 
to your modem, it checks the NETGEAR website for new firmware and alerts\
 you if there is a 
newer version. 
WARNING!
When uploading firmware to the broadband ADSL2+ modem, 
do 
not interrupt the web browser by closing the window, clicking a 
link, or loading a new page. If the browser is interrupted, it could 
corrupt the...

Network Maintenance45
 Broadband ADSL2+ Modem DM111PSPv2
Automatic Firmware Checking On
When automatic firmware checking is on, the modem performs the check and\
 notifies you if 
an upgrade is available or not as shown here.
Figure 9. Firmware upgrade assistant and results screen

To upgrade the firmware:
1.  Click  Yes to allow the modem to download and install the new firmware. The upgrade\
 
process could take a few minutes. When the upload is complete, your mode\
m restarts.
2.  Go to the...

Network Maintenance46
Broadband ADSL2+ Modem DM111PSPv2 
Manually Check for Firmware Upgrades
You can use the Router Upgrade screen to manually check the NETGEAR webs\
ite for newer 
versions of firmware for your product.
WARNING!
When you upload firmware to the modem, 
do not interrupt the web 
browser by closing the window, clicking a link, or loading a new 
page. If the browser is interrupted, it could corrupt the firmware.
To check for firmware upgrades:
1.  Select  Maintenance >  Router Status, and...

Network Maintenance47
 Broadband ADSL2+ Modem DM111PSPv2
Manage the Configuration File
The modem 
configuration settings are stored in a configuration file (*.cfg). Thi\
s file can be 
backed up to your computer, restored, or reverted to factory default set\
tings. 
Back Up
To back up the configuration file:
1.  Select  Maintenance >  Backup Settings  to display the following screen:
2. Click  Backup to save a copy of the current settings.
3.  Choose a location to store the .cfg file that is on a...

Network Maintenance48
Broadband ADSL2+ Modem DM111PSPv2 
Erase
To erase the configuration and restore to factory defaults:
Under some circumstances (for example, if you move the modem t

o a different network or if 
you have forgotten the password), you might want to erase the configura\
tion and restore the 
factory default settings.
Click the Erase button to reset the modem to its factory default settings. 
Erase sets the user name to admin, the password to password, the LAN IP \
address to...

Network Maintenance
49  Broadband ADSL2+ Modem DM111PSPv2
ADSL Port.
MAC Address. The Ethernet MAC address of the DSL port.
IP Address. The DSL port IP address. If no address is shown, the broadband ADSL2+ 
modem cannot connect to the Internet.
Network Type. The value depends on your ISP.
IP Subnet Mask. The DSL port IP subnet mask.
Gateway IP Address. The IP address used as a gateway to the Internet for computers 
configured to use DHCP.
Domain Name Server. The modem DNS server IP addresses. These...

Network Maintenance50
Broadband ADSL2+ Modem DM111PSPv2 
To view statistics:
From the Router Status screen, click tthe Show Statistics button to display a screen similar 
to this:
The following fields are displayed:
Port. The statistics for the WAN (Internet), LAN (local), and wireless L\
AN (WLAN) ports. For 
each port, the screen displays the following:
Status. The link status of the port.
TxPkts. The number of packets transmitted since reset or manual clear.
RxPkts. The number of packets received...