Home > Netgear > Router > Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

Here you can view all the pages of manual Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 251

For information about configuring the type of access, see Use VPN to Access Your Internet
Ser
vice at Home
 on page 256.
Note
8. Clic
k the Apply button.
Y

our settings are saved. VPN is enabled in the modem router, but you must install and set up OpenVPN software
on your computer before you can use a VPN connection (see Install OpenVPN Software on a Windows Computer
on page 
251 and Install OpenVPN Software on a Mac Computer on page 253).
Install OpenVPN Software on a 
Windows Computer
You must install...

Page 252

10.
To install the OpenVPN client utility on your computer, click the openVPN-install-xxx.exe file. 11.
Click the 
Next button.
12. Read the License Agreement and click the I Agree
 button. 13.
Leave the check boxes selected as shown in the previous figure, and click the Next
 button.
14. To specify the destination folder, click the Browse button, select a destination folder, and click the Next button. 15.
Click the 
Install button. Use VPN to Access Your Network
252
Nighthawk AC1900 WiFi VDSL/ADSL Modem...

Page 253

The window displays the progress of the installation and then displays the final installation window.
16.
Click the Finish button.
17. Unzip the configuration files that you downloaded in Step 6 and copy them to the folder in which the OpenVPN
client utility is installed on your computer.
If your device is a Windows 64-bit system, the OpenVPN client utility is installed by default in the C:\Program
files\OpenVPN\config\ folder.
18. Modify the 

VPN interface name to NETGEAR-VPN:
a. In 

Windows, select...

Page 254

A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select 
ADVANCED > Advanced Setup > VPN Service.
The 
VPN Service page displays.
5. Make sure that the 
Enable VPN Service check box is selected.
F
or more information, see 
Specify VPN Service in the Modem Router on page 250.
6. Clic
k the 
For non-Windows button to download the OpenVPN...

Page 255

To open a VPN tunnel:
1.
Launch the OpenVPN application with administrator privileges. The OpenVPN icon displays in the Windows taskbar.
You can create a shortcut to the VPN program, then use the shortcut to access the settings and
select the run as administrator check box. Then every time you use this shortcut, OpenVPN
automatically r

uns with administrator privileges.
Tip
2. Right-click the OpenVPN icon. 3.
Select 
Connect.
The 
VPN connection is established. You can do the following:
• Launch a web...

Page 256

Use VPN to Access the Modem Router’s USB Device and Media
Fr
om a Windows Computer
To access a USB device and download files: 1.
In Windows file manager, select the Network folder. The network resources display. The ReadySHARE icon is in the Computer section and the remote ReadyDLNA:
D7000
 icon is in the Media Devices section (if DLNA is enabled in the modem router).
2. If the icons do not display, click the 
Refresh button to update the page.
If the local LAN and the remote LAN are using the same IP...

Page 257

To allow VPN clients to use your home Internet service:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the 
modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select 
ADVANCED > Advanced Setup > VPN Service.
The 
VPN page displays.
5. Select the Enable VPN Service radio...

Page 258

A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select 
ADVANCED > Advanced Setup > VPN Service.
The 
VNP page displays.
5. Select the Enable VPN Service radio button.
6. Scroll do

wn to the Clients will use this VPN connection to access section, and select the 
Home Network only
radio button.
7. Click the 
Apply button.
Your settings are...

Page 259

14
Manage Port Forwarding and Port
Triggering
You can use port forwarding and port triggering to set up rules for Internet traffic for services and applications. You need
networking knowledge to set up these features.
This chapter includes the following sections:
•Manage Port Forwarding to a Local Server for Services and Applications on page 260
• Manage P
ort Triggering for Services and Applications on page 265 259 

Page 260

Manage Port Forwarding to a Local Server for Services and
Applications
If a server is part of your network, you can allow certain types of incoming traffic to reach the server. For example,
you might want to make a local web server, FTP server, or game server visible and available to the Internet.
The modem router can forward incoming traffic with specific protocols to computers on your local network. You can
specify the ser
vers for applications and you can also specify a default DMZ server to which the...
Start reading Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

Related Manuals for Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

All Netgear manuals