Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

Remove a Reserved IP Address Entry
You can remove a reserved IP address entry.
To remove a reserved IP address entry: 1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the 
modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select 
ADVANCED > Setup > LAN Setup.
The LAN Setup...

A login window opens.
3. Enter the modem router user name and password.
The user name is 
admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup. 5.
Make sure that the Use Router as DHCP Server check box is selected.
This chec

k box is selected by default.
6. Specify the range of IP addresses that the modem router assigns:
• In the Single/Start IP Address field, enter the lowest number in the range....

Disable the Built-In DHCP Server
By default, the modem router functions as a DHCP server. The modem router assigns IP, DNS server, and default
gate
way addresses to all devices connected to the LAN. The assigned default gateway address is the LAN address
of the 
modem router.
You can use another device on your network as the DHCP server or specify the network settings of all your computers. If you disable the DHCP server and no other DHCP server is available on your network, you
must set your computer IP...

The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. In the 
Device Name field, enter a new name.
6. Clic
k the Apply button.
Y

our settings are saved.
Set Up and Manage Custom Static Routes Static routes provide detailed routing information to your modem router. Typically, you do not need to add static
routes

. You must configure static routes only...

To set up a static route:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the 
modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select 
ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displa
ys.
5. Click the Add button. 6.
To make the route private, select...

Description
Field
Enter the IP address of the gateway.
The IP address of the gateway must be on the same LAN segment as the modem router.
Gate
way IP Address
Enter a number from 1 through 15.
This value represents the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
Metr

ic
9. Click the Apply button.
Y

our settings are saved. The static route is added to the table on the Static Routes page.
Change a Static...

Remove a Static Route
You can remove an existing static route that you no longer need.
To remove a static route: 1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the 
modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select 
ADVANCED > Advanced Setup > Static Routes.
The...

12
Manage the Modem Router and Monitor the
Traffic
This chapter describes how you can manage the settings for administering and maintaining your modem router and
monitor the netw
ork.
The chapter includes the following sections:
• Update the Firmware of the Modem Router on page 219
• Manage the Configur

ation File of the Modem Router
 on page 221
• Reco
ver the admin Password on page 223
• Retur

n the Modem Router to Its Factory Default Settings on page 
223
• Disable LED Blinking or Turn Off LEDs on...

Update the Firmware of the Modem Router
The modem router firmware is stored in flash memory.
Y
ou can check to see if new firmware is available and update the modem router
 to the new firmware. You can also
visit the 
NETGEAR support website, download the firmware manually, and update the modem router to the new
fir
mware.
Check for New Firmware and Update the Modem Router
F

or you to check for new firmware, the modem router must be connected to the Internet.
T

o check for new firmware and update your...

a.
Launch a web browser from a computer or WiFi device that is connected to the network.
b. Enter http://www.routerlogin.net.
A login window opens.
c. Enter the 
modem router user name and password.
The user name is 
admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays. The firmware version is stated in the top right, under the Logout button.
8. Read the ne

w firmware release notes to determine whether you must reconfigure the modem 
router...