Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

To install the utility:
1.
If necessary, unzip the ReadySHARE Printer utility setup file.
2. Double-click the ReadySHARE Printer utility setup file that you downloaded. 3.
Follow the wizard instructions to install NETGEAR USB Control Center. Share a USB Printer
191
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 

After the InstallShield Wizard completes the installation, the NETGEAR USB Control Center prompt\
s you to
select a language.
4.
Select a language from the menu and click the OK button. Some firewall software, such as Comodo, blocks NETGEAR USB Control Center from accessing the USB printer.
If you do not see the USB printer displayed onscreen, you can disable the firewall temporarily to allow the utility
to work.
5. Select the printer and click the Connect button.
The pr
inter status changes to Manually...

Use the Shared Printer
For each computer, after you click the Connect and Disconnect buttons once, the utility automatically manages
the pr
inting queue. By default, the utility starts automatically whenever you log on to Windows and runs in the
background.
Manually Connect and Print
For each computer, after you click the Connect and Disconnect buttons once, the utility automatically manages
the pr

inting queue. By default, the utility starts automatically whenever you log on to Windows and runs in the...

View or Change the Status of a Printer
To view or change the status: 1.
Click the NETGEAR USB Control Center icon  .
The Status column shows the status for each device:
•
Available. No print jobs are in progress. You can use the USB printer from any computer in the network.
• Connected. Your computer is connected to the printer and will be released when your print job is done.
• Man
ually Connected by
. Only the connected computer can use the printer.
• Waiting to Connect. Your computer is not connected...

To use the scan feature of a multifunction USB printer:
1.
Click the NETGEAR USB Control Center icon  .
2.
Make sure that the printer status shows as Available.
3. Click the Network Scanner button. The scanner page displays so that you can use the USB printer for scanning.
Share a USB Printer
195
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 

Manage the NETGEAR USB Control Center Settings
You can stop the NETGEAR USB Control Center from starting automatically when you log in to Windows. You can
also change the language and specify the time-out to release the printer connection.
Turn Off Automatic Startup of the NETGEAR USB Control
Center
You can stop the NETGEAR USB Control Center from starting automatically when you log in to Windows.
To turn off the automatic startup of the NETGEAR USB Control Center: 1.
Click the NETGEAR USB Control Center...

Change the NETGEAR USB Control Center Language
To change the language: 1.
Click the NETGEAR USB Control Center icon  .
The main page displays.
2. Select Tools > Configuration.
The Control Center - Configuration page displays.
3. From the 
Language menu, select a language.
4. Clic
k the OK button.
The ne

xt time the NETGEAR USB Control Center starts, the language changes.
Specify the Time-Out To specify the time-out: 1.
Click the NETGEAR USB Control Center icon  .
The main page displays.
2. Select 
Tools...

11
Manage the WAN and LAN Network Settings
This chapter describes how you can manage the WAN and LAN network settings of the modem router.
The chapter includes the f
ollowing sections:
• Change the Physical WAN Connection Preference
 on page 199
• Enab
le and Configure a VLAN on page 199
• Enab

le Bridge Mode for IPTV Devices
 on page 202
• Manage the 
WAN Security Settings on page 203
• Set Up a Def

ault DMZ Server on page 
204
• Manage NAT Filtering
 on page 205
• Manage the SIP Application-Le
vel...

Change the Physical WAN Connection Preference
The modem router can autodetect the type of WAN connection. However, you can also set the WAN connection
pref
erence manually to either the DSL port or the Ethernet WAN port. The 
modem router does not support load balancing over DSL and Ethernet WAN interfaces.
Only 
one WAN interface (either the DLS port or the Ethernet WAN port) can be active at any
time.
Note
To change the WAN connection preference: 1.
Launch a web browser from a computer or WiFi device...

If you are subscribed to IPTV service, the modem router might require VLAN tags to distinguish between the Internet
traffic and the IPTV traffic.
For information about enabling and configuring the virtual IPTV interface, see one of the following sections:
•
Manually Set Up an ADSL Internet Connection on page 49
• Manually Set Up a VDSL Internet Connection on page 
60
• Manually Set Up a Cable or Fiber Internet Connection on page 
69 If your ISP provides directions for how to set up VLANs for IPTV and...