Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

d.
To specify a priority for the VLAN, in the Priority (0 ~ 7) field, enter a value from 0 to 7.
e
. Click the 
Apply button.
Your settings are saved for the virtual Internet interface.
6. From the menu above the 
Enable This Interface check box, select IPTV. The previous figure shows only the top of the Internet Setup page.
7. Configure a VLAN for the virtual IPTV interface:
a.Make sure that the Enable This Interface check box is selected for the virtual IPTV interface.
If y

ou already enabled and...

Enable Bridge Mode for IPTV Devices
Some devices, such as an IPTV, cannot function behind the modem router’s network address translation (NAT)
ser
vice or firewall. Based on what your Internet service provider (ISP) requires, for the device to connect to the ISP’s
network directly, you can enable the bridge between the device and the modem router
’s virtual IPTV interface. In
bridge mode, by default, the LAN 4 port on the back panel of the modem router is bound to the virtual IPTV interface.
In addition...

5.
From the menu above the Enable This Interface check box, select IPTV. 6.
Make sure that the Enable This Interface check box is selected for the virtual IPTV interface.
If y

ou already enabled and configured the virtual IPTV interface, the check box is selected.
7. Select the Bridge Mode check box.
By def

ault, the LAN 4 port is bound to the virtual IPTV interface and the Enable IPTV on LAN4
 check box is
automatically selected.
8. If you also connected an IPTV device to the LAN 3 port, select the...

A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select 
ADVANCED > Setup > WAN Setup.
The 
WAN Setup page displays.
5. To enable a port scan and disable DoS protection, select the 
Disable Port Scan and DoS Protection check
bo
x.
6. To enable the modem router to respond to a ping, select the Respond to Ping on Internet Port check box.
7. Clic

k...

The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The 
WAN Setup page displays.
5. Select the 
Default DMZ Server check box.
6. Enter the IP address of the server.
7. Click the 
Apply button.
Your settings are saved.
Manage NAT Filtering Network Address Translation (NAT) determines how the modem router processes inbound traffic. Secured NAT
protects computers on the LAN from attac...

Manage the SIP Application-Level Gateway
The application-level gateway (ALG) for the Session Initiation Protocol (SIP) is enabled by default for enhanced
address and port translation. However, some types of VoIP and video traffic might not work well when the SIP ALG
is enabled. For this reason, the modem router provides the option to disable the SIP ALG.T
o change the default SIP ALG setting: 1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter...

The WAN Setup page displays.
5. Clear the Disable IGMP Proxying check box.
By default, the 
Disable IGMP Proxying check box is selected and IGMP proxying is disabled.
6. Clic
k the Apply button.
Y

our settings are saved.
Manage the 
Modem Router’s LAN IP Address Settings
The modem router is preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The
modem router’s default LAN IP configuration is as follows:
• LAN IP ad

dress. 192.168.0.1 (This is the same as...

4.
Select ADVANCED > Setup > LAN Setup. 5.
In the 
IP Address field, enter the LAN IP address for the modem router.
6. In the 
IP Subnet Mask, enter the LAN subnet mask for the modem router.
7. Clic
k the 
Apply button.
Your settings are saved.
If you changed the LAN IP address of the 
modem router, you are disconnected when the changes take effect.
T
o reconnect, close your browser, relaunch it, and log in to the modem router at its new LAN IP address.
Mana

ge the Router Information Protocol Settings...

The LAN Setup page displays.
5. From the RIP Direction menu, select an RIP direction:
• Both. The modem router broadcasts its routing table periodically and incorporates information that it receives.
This is the default setting.
• Out Only
. The modem router broadcasts its routing table periodically but does not incorporate the RIP
information that it receives.
• In Only. The modem router incorporates the RIP information that it receives but does not broadcast its routing
table.
6. From the 
RIP Version...

6.
Either select a device from the Address Reservation Table by selecting the corresponding radio button or specify
the reserved IP address information:
•In the IP Address field, enter the IP address to assign to the computer or device.
Choose an IP address from the modem router’s LAN subnet, such as 192.168.0.x.
• In the MAC Address field, enter the MAC address of the computer or device.
• In the Device Name field, enter the name of the computer or device.
7. Click the 
Add button.
The reser
ved address...