Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual
Here you can view all the pages of manual Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 281
To check the Internet IP address: 1. Launch a web browser from a computer or WiFi device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > ADVANCED Home . The ADVANCED Home page displays. 5. In the Internet Port pane, check to see that the IP Address field...
Page 282
Verify the PPPoE or PPPoA Connection If you use a PPPoE or PPPoA connection to your ISP, make sure that the connection works. To verify that your PPPoE or PPPoA connection is working: 1. Launch a web browser from a computer or WiFi device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page...
Page 283
To reconnect if your PPPoE or PPPoA connection does not function: 1. Launch a web browser from a computer or WiFi device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > ADVANCED Home . The ADVANCED Home page displays. 5. In the Internet Port pane, click...
Page 284
By configuring the traffic meter not to block Internet access when the traffic limit is reached, you can resume Internet access (see Unblock the Traffic Meter After the Traffic Limit Is Reached on page 245). If your ISP sets a usage limit, the y might charge you for the overage. • Your computer might not recognize any DNS server addresses. A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric IP addresses. Typically your ISP provides the addresses of one...
Page 285
If you want to change the WiFi settings of the modem router’s main network, use a wired connection to avoid being disconnected when the new WiFi settings take effect. Tip If your WiFi device finds your network but the signal strength is weak, check these conditions: • Is your modem router too far from your WiFi device or too close? Place your WiFi device near the modem router b ut at least 6 feet (1.8 meters) away and see whether the signal strength improves. • Are objects between the modem router and...
Page 286
Check that the appropriate LEDs are on for your network devices. If your modem router and computer are connected to a separate Ethernet switch, make sure that the link LEDs are lit for the switch ports that are connected to your computer and modem router. • Wrong netw ork configuration Verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer. Verify that the IP address for your modem router and your computer are correct and that the addresses...
Page 287
• Manually Set Up an ADSL Internet Connection on page 49 • Manually Set Up a VDSL Internet Connection on page 60 • Manually Set Up a Cable or Fiber Internet Connection on page 69 Diagnostics and Troubleshooting 287 Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 288
A Supplemental Information This appendix covers the following topics: •Factory Settings on page 289 • T echnical Specifications on page 291 288
Page 289
Factory Settings You can reset the modem router to the factory default settings that are shown in the following table. F or more information about resetting the modem router to its factory settings, see Return the Modem Router to Its F actory Default Settings on page 223. Table 4. D7000 modem router factory default settings Default Setting Feature Router login www.routerlogin.net (or www.routerlogin.com or 192.168.0.1) User login URL admin User name (case-sensitive) password Login password...
Page 290
Default Setting Feature Enabled Time adjusted for daylight saving time Main WiFi network Enabled WiFi communication See product label SSID name WPA2-PSK (AES) Security See product label WiFi passphrase •North America: United States • Europe: Europe • Other continents: Varies by region Country/region Auto. The available channels depend on the region. RF channel Auto Throughput can vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction,...