Netgear Cg30002 Status Manual

Advanced Settings31
 NETGEAR Wireless Cable Gateway CG3000
Access Control by MAC Address
You can use access control to specify which wireless computers or device\
s can connect to 
the gateway based on their MAC addresses. If you do not set up access co\
ntrol, any wireless 
computer or device that is configured with the correct SSID and wireless\
 security settings will 
be allowed to access to your wireless network.
1. 
Log in to the gateway as described in  Log In to Your Gateway on page 9.
2.  In the...

Advanced Settings32
NETGEAR Wireless Cable Gateway CG3000 
Firewall Rules: Port Blocking
You can use port blocking to block outbound traffic on specific ports. O\
utbound traffic rules 
control access to outside resources from local users.The default rule is\
 to allow all access 
from the LAN side to the outside. You can use port blocking to add prede\
fined or custom rules 
to specify exceptions to the default rule.
Note:  
Any outbound traffic that is not blocked by rules that you have 
created is...

Advanced Settings33
 NETGEAR Wireless Cable Gateway CG3000
4. 
Perform one of the following actions:
•      Click  Add to save your settings. The Active Filters table now displays the list o\
f ports 
that are currently forwarded.
•     To delete a service, select the radio button in the Active Filters table\
 for the service  that you want to delete, and then click Delete .
•     To reset the selection in the Services drop-down list and to clear all t\
he fields in the  Add Custom Rules table, click...

Advanced Settings
34 NETGEAR Wireless Cable Gateway CG3000 
•     Local IP Address. Enter the local IP address for the computer that uses the service.
4. Perform one of these actions:
•     Click Add. The Active Forwarding Rules table displays the list of forwarded ports.
•     To delete a service, select the radio button in the Active Forwarding Rules table for the 
service that you want to delete, and then click Delete.
•     To reset the selection in the Services field and to clear all the fields in...

Advanced Settings
35  NETGEAR Wireless Cable Gateway CG3000
Assign a Computer as The DMZ Host
1. Type the last field of the IP address field in the DMZ Address field. 
2. Click Apply. 
Remove a Computer from Being a DMZ Computer:
1. Type 0 in last field of the IP address field in DMZ Address. 
2. Click Apply. 
Dynamic DNS
A Dynamic DNS (DDNS) Service provides a central public database where information such 
as email addresses, host names and IP addresses can be stored and retrieved. The 
Dynamic DNS...

Advanced Settings36
NETGEAR Wireless Cable Gateway CG3000 
LAN IP Setup
The LAN IP screen allows you to configure LAN services such as the IP ad\
dress of the 
gateway and DHCP. The TCP/IP and DHCP default values work fine in most c\
ases. 
Note:  If you disable the DHCP server, you will need to assign to your 
computer a static IP address to reconnect to the gateway and enable 
the DHCP server again.
1.  Select  Advanced > LAN IP . 
2. Enter these settings:
•     LAN IP Address. The factory default...

Advanced Settings
37  NETGEAR Wireless Cable Gateway CG3000
Reserving an IP Address for DHCP Use
To reserve an IP address for DHCP use, enter the DHCP server reservation settings for the 
private LAN under DHCP Reservation Lease Info in the LAN Setup screen.
Reserve an IP address for DHCP:
1. Enter the MAC address of the computer for which you want to reserve an IP address.
2. Enter the permanent IP address for the computer.
3. Click Add to save your settings. The MAC address and IP address display in...

Advanced Settings38
NETGEAR Wireless Cable Gateway CG3000 
Remote Management
With remote management, you can allow a user or users on the Internet to\
 configure, 
upgrade, and check the status of the gateway.
Note:  Use very secure passwords if you enable remote management. 
Passwords should contain no dictionary words from any language, 
and should be a mixture of letters (both upper and lower case), 
numbers, and symbols. Your password can be up to 16 characters.
To manage this gateway through the...

Advanced Settings39
 NETGEAR Wireless Cable Gateway CG3000
c. 
You are prompted for the password for this gateway.
5.  If you want the ability to reset to factory default settings remotely, a\
nd then log in again 
remotely, select the  Allow Remote management after Factory Default Reset  check box. 
6.  Click  Apply to save your changes.
Allow Remote Management 
(HTTP/HTTPS) CM interface If selected, remote management is enabled, and connection from the 
Internet to this gateway with HTTP and HTTPS is...

Advanced Settings40
NETGEAR Wireless Cable Gateway CG3000 
Universal Plug and Play (UPnP)
Universal Plug and Play (UPnP) helps devices, such as Internet applian\
ces and computers, 
access the network and connect to other devices as needed. UPnP devices \
can 
automatically discover the services from other registered UPnP devices o\
n the network. With 
UPnP you can specify:
•     Advertisement Period . This specifies how often the gateway broadcasts its UPnP 
information. The default is 30 minutes....